Particle Counters | McMaster-Carr

Filter by

Measures

Air Particles by Volume

Air Particles Over Time

Air Quality Index

Barometric Pressure

Carbon Dioxide Level

Equivalent Carbon Dioxide

Relative Humidity

Relative Volatile Organic Compound Concentration

Temperature

Total Volatile Organic Compound Concentration

System of Measurement

Inch

Metric

Measurement Precision

For Testing

Oxidation Reduction Potential (ORP)

Resistivity

Salinity

Temperature

Total Dissolved Solids (TDS)

Sensor Type

Electrical Connection

Environment

High-Pressure Washdown

Input Voltage

Meter Type

For Use With

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Maximum Temperature

REACH

RoHS

Compliant with Exemptions

Minimum Temperature

Length

Width

Height

Depth

Certification

Battery Life

Battery Chemistry

Maximum Conductivity

Output Data Frequency

46 Products

Air Particle Counters

Check your indoor air quality (IAQ) by measuring the amount of particles present. These counters are often used to monitor dust levels in workshops, check for particles in classrooms, and measure filter efficiency in HVAC systems. The sensor probe detects and identifies particles of six different sizes, helping you confirm that your clean room complies with ISO Class requirements. First, use the zero count filter to establish a baseline before taking a sample. Then, either measure the amount of air particles detected within a set time range or the amount of air particles detected within a certain air volume. Counters store up to 10,000 readings in their internal memory, and you can transfer data to your computer via Ethernet or USB connection—no special software required. Compact, lightweight, and battery powered, these counters are portable and able to operate in tight spaces. They’re CE marked as compliant with European health, safety, and environmental standards.

									Battery
Measures	Measurement Precision, μm	Flow Rate, ft³/min	Temp. Range, ° F	Features	Includes	Certification	Specs. Met	JIS Specification	Life, hr.	Charger Included	Batteries Included		Each
Air Particles by Volume, Air Particles Over Time	0.3 0.5 1 2 5 10	0.1	50 to 100	Backlit Display Isokinetic Sensor Probe Memory Storage	Carrying Case Ethernet Cable Filter Adapter Protective Cap USB Cable Zero Count Filter	CE Marked	ISO 21501	JIS B 9921	10	Yes	Yes	5750N11	000000000

Environmental-Monitoring Modules for Development Boards

Keep equipment running and working conditions safe—these modules add air quality tracker capabilities to your development board. Each module gathers data on air conditions, ranging from temperature and humidity to carbon dioxide or volatile organic compound (VOC) levels. These modules easily connect to boards and other components with Qwiic cords or by soldering.

Modules with Air Quality Sensor

Modules with an air quality sensor identify spikes in VOC levels to track air quality changes. Instead of directly measuring VOCs, they measure how much the VOC level has changed in the last 24 hours.

	Output Data
	Resolution, bit	Freq., Hz	Measures	Relative Volatile Organic Compound Index	Input Voltage, V DC	I2C Address	Connection Method	No. of Qwiic Connections	Lg.	Wd.		Each
I²C Communication Protocol—Qwiic Connection



		16	33	Relative Volatile Organic Compound Concentration	0 to 500	1.7 to 3.6	0x59	Solder	2	1"	1"	7126N13	000000

Modules with Temperature, Humidity, and Air Quality Sensor

Modules with a temperature, humidity, and air quality sensor help you make sure the air is healthy in your facility. They directly measure the amount of carbon dioxide in the air.

	Output Data
	Resolution, bit	Freq., Hz	Measures	Temp. Range, ° C	RH	Carbon Dioxide Concentration Measured, ppm	Input Voltage, V DC	I2C Address	Connection Method	No. of Qwiic Connections	Lg.	Wd.		Each
I²C Communication Protocol—Qwiic Connection



		16	0.2	Temperature, Relative Humidity, Carbon Dioxide Level	-10 to 60	0% to 100%	0 to 40,000	2.4 to 5.5	0x62	Solder	2	1"	1"	7126N11	000000

Modules with Temperature, Humidity, Air Quality, and Barometer Sensor

Modules with a temperature, humidity, air quality, and barometer sensor give you the most comprehensive picture of air conditions in your facility. They directly measure the amount of VOCs and give you an estimated measurement of carbon dioxide based on VOC levels. They monitor air quality using Germany’s Air Quality Index (AQI).

	Temp. Range, ° C	RH	Equiv. Carbon Dioxide Concentration Measured, ppm	Total Volatile Organic Compound, ppb	Barometric Pressure, in. Hg	Input Voltage, V DC	I2C Address	Connection Method	No. of Qwiic Connections	Lg.	Wd.		Each
I²C Communication Protocol—Qwiic Connection



	Temperature, Relative Humidity, Equivalent Carbon Dioxide, Total Volatile Organic Compound Concentration, Air Quality Index, Barometric Pressure	0 to 65	20% to 80%	400 to 650,000	0 to 65,000	8.9 to 32.5	1.2 to 3.6	0x52 0x53 0x76 0x77	Solder	2	1"	1"	7126N14	000000

Sanitary Conductivity Sensors

Three-Color Display

Image of Attribute. Front orientation. Contains Annotated. Chemistry Meters. Sanitary Conductivity Sensors.

Often used to save rinse water in beverage and pharmaceutical lines, these sensors test the amount of chemicals, cleaners, and other substances in liquids by measuring how well the liquid conducts electricity. They’re 3-A and European Hygienic Engineering and Design Group (EHEDG) certified, thanks to their design that’s easy to keep clean. Highly polished, they limit where bacteria could grow. They also withstand washdowns with hot water, chemicals, and cleaners common to sanitary lines because of their PEEK probe, stainless steel body, and IP ratings. Their IP ratings also mean they’re dust tight and won’t fail if briefly under water. All are FDA compliant to safely touch food.

These sensors work with 4-20 mA analog output to connect to remote displays and programmable logic controllers (PLCs), making them good for hard-to-reach areas and frequent application changes. This also means they’ll set off alarms and trigger cycles to start and stop in automated systems. With the touchscreen, program each color of the display to alert you to errors, completed cycles, and other events. Both the head and the display rotate to view readings from the best angle.

Highly accurate, these sensors test almost any liquid. They also measure temperature—no need for a separate sensor. To compare readings as temperature changes, they automatically standardize readings at 77° F. All meet European safety standards, since they’re CE marked.

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Sensor			Conductivity
	Lg., mm	Material	Dia., mm	Lg., mm	Range	Accuracy	Electrical Connection Type	Pipe Size	Thread Type	Gender	ATC Range, ° F	Enclosure Rating	Certification	Food Industry Std.	Cannot Be Sold To		Each
For Use With Liquids



		37	PEEK	3.6	26	0 to 1,000 mS 0 to 500 mS 0 to 500 μS	±1.5% ±1% ±1.5%	Threaded M12 Plug (Two 4-Pole Connections)	1	BSPP	Male	-4 to 302	IP67, IP69K	CE Marked, EHEDG Certified	3-A Certified 74-07, FDA Compliant 21 CFR 177.2415	Canada	6352N21	000000000


		60	PEEK	3.6	26	0 to 1,000 mS 0 to 500 mS 0 to 500 μS	±1.5% ±1% ±1.5%	Threaded M12 Plug (Two 4-Pole Connections)	1	BSPP	Male	-4 to 302	IP67, IP69K	CE Marked, EHEDG Certified	3-A Certified 74-07, FDA Compliant 21 CFR 177.2415	Canada	6352N22	00000000

Straights

		Each
Quick-Clamp Adapter	6352N24	0000000

Bench-Top TDS Meters

Commonly used to test environmental samples, boiler condensate, wastewater, and other dirty liquids for contaminants, this bench-top meter determines the total dissolved solids (TDS) in a solution. It has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration knob to maintain accuracy.

For Testing Total Dissolved Solids (TDS)

Image of Product. Front orientation. Chemistry Meters. Bench-Top TDS Meters .

		Total Dissolved Solids (TDS)
	Sensor Material	Range	Accuracy	ATC Range, ° F	Ht.	Wd.	Dp.	Batteries Included		Each
For Use With Dirty Liquids



		Plastic	0 to 50 ppm 0 to 500 ppm 0 to 5,000 ppm	±2%	50 to 160	4"	3 1/2"	4 1/2"	Yes	1128T16	0000000

Conductivity Meter Cases

		Each
Carrying Case	1128T15	0000000

Water-Resistant Multifunction Chemistry Meters

Test different water-chemistry measurements in dirty, wet conditions. Often used in pools and spas, all of these meters are for use with clean liquids. They meet IP57 for protection from dust and temporary submersion in liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a calibration solution (not included) and the calibration button to maintain accuracy.

For Testing Chlorine, Oxidation Reduction Potential (ORP), and pH

Chlorine, oxidation reduction potential (ORP), and pH meters come with three sensors that each take one chemistry measurement.

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Oxidation Reduction Potential (ORP)		pH
	Sensor Material	Range, mV	Accuracy	Range, pH	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		Glass	-999 to 999	±1 mV	0 to 14	±0.01 pH	23 to 194	IP57	CE Marked	6 7/8"	Yes	Canada	LCD	1160T11	0000000

Replacement Sensors

For Testing		Each
Oxidation Reduction Potential (ORP)	1160T22	000000
pH	1160T21	00000
Chlorine	1160T23	000000

For Testing Conductivity, Salinity, and Total Dissolved Solids (TDS)

Conductivity, salinity, and total dissolved solids (TDS) meters come with one sensor that takes all three chemistry measurements. You can also use them in aquaculture solutions, wastewater, and other dirty liquids.

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Conductivity		Salinity		Total Dissolved Solids (TDS)
	Sensor Material	Range	Accuracy	Range, ppm	Accuracy	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean and Dirty Liquids



		Plastic	0 to 199.9 μS 200 to 1,999 μS 2 to 19.99 mS	±2%	0 to 99.9	±2%	0 to 99.9 ppm 100 to 999 ppm 1 to 9.99 ppt	±2%	32 to 149	IP57	CE Marked	6 3/4"	1 3/8"	1 5/8"	Yes	Canada	LCD	13945T52	0000000

Replacement Sensors

For Testing		Each
Conductivity, Salinity, Total Dissolved Solids (TDS)	13945T54	000000

Easy-Read Bench-Top Multifunction Chemistry Meters

Don’t strain your eyes reading a scale—these bench-top meters indicate exact results on the digital display. For complete resistance to dust and protection from temporary submersion, these meters float and have a housing that meets NEMA 6 and IP67. They're for use with water and other clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

For Testing Conductivity, Resistivity, and Total Dissolved Solids (TDS)

Image of Product. Front orientation. Chemistry Meters. Easy-Read Bench-Top Multifunction Chemistry Meters .

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Conductivity		Resistivity		Total Dissolved Solids (TDS)
	Sensor Material	Range	Accuracy	Range	Accuracy	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		Plastic	0 to 9,999 μS 10 to 200 S	±1%	10 kohm to 30 Mohm	±1%	0 to 9,999 ppm 10 to 200 ppt	±1%	32 to 160	IP67, NEMA 6	CE Marked	2 1/2"	2 3/4"	7 3/4"	Yes	Canada	LCD	1134T6	0000000

For Testing Conductivity, Oxidation Reduction Potential (ORP), pH, Resistivity, and Total Dissolved Solids (TDS)

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Conductivity		Resistivity		Oxidation Reduction Potential (ORP)		pH		Total Dissolved Solids (TDS)
	Sensor Material	Range	Accuracy	Range	Accuracy	Range, mV	Accuracy	Range, pH	Accuracy	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		Glass	0 to 9,999 μS 10 to 200 mS	±1%	10 kohm to 30 Mohm	±1%	-999 to 999	±1 mV	0 to 14	±0.01 pH	0 to 9,999 ppm 10 to 200 ppt	±1%	32 to 160	IP67, NEMA 6	CE Marked	2 1/2"	2 3/4"	7 3/4"	Yes	Canada	LCD	1134T8	000000000

Replacement Sensors

For Testing		Each
Oxidation Reduction Potential (ORP), pH	1134T9	0000000

Water-Resistant TDS Meters

Since these meters float and have a housing that meets IP67, they won’t be damaged by temporary submersion and have complete resistance to dust. They detect total dissolved solids (TDS) in water, hydroponic solutions, and other clean liquids to determine contaminant levels. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

For Testing Total Dissolved Solids (TDS)

Image of Product. Front orientation. Chemistry Meters. Water-Resistant TDS Meters.

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Total Dissolved Solids (TDS)
	Sensor Material	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		304 Stainless Steel	0 ppm to 1,000 ppm	±1.5%	32 to 122	IP67	CE Marked	7 3/8"	1 7/8"	1 1/2"	Yes	Canada	LCD	13945T82	0000000

Replacement Sensors

	Each
13945T85	000000

Bench-Top Conductivity Meters

Pour contaminated water, wastewater, printing fountain solutions, and other dirty liquids into the meter cup to test electrical conductivity levels that indicate the concentration of salts, nutrients, chemicals, and other substances. These meters have automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration knob to maintain accuracy.

For Testing Conductivity

Image of Product. Front orientation. Chemistry Meters. Bench-Top Conductivity Meters .

		Conductivity
	Sensor Material	Range	Accuracy	ATC Range, ° F	Ht.	Wd.	Dp.	Batteries Included		Each
For Use With Dirty Liquids



		Plastic	0 to 0.5 μS 0 to 5 μS 0 to 50 μS 0 to 500 μS 0 to 5,000 μS	±2%	32 to 120	4"	3 1/2"	4 1/2"	Yes	1128T14	0000000


		Plastic	0 to 10 μS 0 to 100 μS 0 to 1,000 μS 0 to 10,000 μS	±2%	50 to 160	4"	3 1/2"	4 1/2"	Yes	1128T137	000000

Conductivity Meter Cases

		Each
Carrying Case	1128T15	0000000

Bench-Top Multifunction Chemistry Meters

Check the pH and conductivity of water and other clean liquids with one bench-top device. This meter has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration knob to maintain accuracy.

For Testing Conductivity and pH

Image of Product. Front orientation. Chemistry Meters. Bench-Top Multifunction Chemistry Meters .

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Conductivity		pH
	Sensor Material	Range	Accuracy	Range, pH	Accuracy	ATC Range, ° F	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To		Each
For Use With Clean Liquids



		Glass	0 to 10 μS 0 to 100 μS 0 to 1,000 μS 0 to 10,000 μS	±2%	2 to 12	±0.2 pH	50 to 160	4"	3 1/2"	4 1/2"	Yes	Canada	13485T64	0000000

Replacement Sensors

For Testing		Each
pH, Conductivity	13485T62	0000000

ORP Meters

Measure a solution’s oxidation reduction potential (ORP) to determine its ability to break down contaminants. These meters are commonly used to monitor water quality in pools, spas, and other clean liquids. Use a Calibration Solution (not included) and the calibration adjustment screw to maintain accuracy.

For Testing Oxidation Reduction Potential (ORP)

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

		Oxidation Reduction Potential (ORP)
	Sensor Material	Range, mV	Accuracy	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Dirty Liquids



		Plastic	-999 to 999	±2 mV	7"	1 1/2"	1 1/2"	Yes	Canada	LCD	1196T99	0000000

pH Meters

More precise than test strips, these meters are often used to measure the pH of dirty liquids in agricultural systems, aquaculture tanks, and printing fountains. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

For Testing pH

Image of Product. Front orientation. Chemistry Meters. pH Meters .

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

		pH
	Sensor Material	Range, pH	Accuracy	ATC Range, ° F	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Dirty Liquids



		Glass	0 to 14	±0.1 pH	32 to 122	7"	1 1/2"	1 1/4"	Yes	Canada	LCD	1196T35	000000

Remote-Reading Multifunction Chemistry Meters

Take multiple water-chemistry and temperature measurements in hard-to-reach places from up to 3 feet away. Often used in tap water and wastewater, these meters work in both clean and dirty liquids. Automatic temperature compensation standardizes readings to 77° F to prevent inaccurate results in changing temperatures. The data hold function freezes the current reading on the display. For easy viewing, temperature and chemistry measurements appear on the same screen. These meters are IP57 rated, so they resist dust and withstand temporary submersion.

To maintain their accuracy, all have a calibration button and some also come with calibration solutions.

For Testing Conductivity, Salinity, Temperature, and Total Dissolved Solids (TDS)

Image of Product. Front orientation. Chemistry Meters. Remote-Reading Multifunction Chemistry Meters , For Testing Total Dissolved Solids (TDS).

Conductivity, salinity, temperature, and total dissolved solids (TDS) meters take four measurements at once. Conductivity measures the concentration of salts, nutrients, chemicals, and other substances. Salinity measures the amount of dissolved salts. TDS determines the contaminant levels. The stainless steel sensor is durable and resists breaking.

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

	Conductivity		Salinity			Total Dissolved Solids (TDS)
	Range	Accuracy	Range, ppt	Accuracy	Temp. Accuracy	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean and Dirty Liquids



		0 to 19.99 μS 20 to 199.9 μS 200 to 1,999 μS 2 to 19.99 mS 20 to 199.9 mS	±1% ±1% ±1% ±1% ±1%	0 to 100	±1%	±0.9° F	0 ppm to 0.1 ppm	±1%	32 to 212	IP57	CE Marked	7 1/2"	3 9/16"	1 5/16"	Yes	Canada	LCD	1122T12	0000000

Replacement Sensors

For Testing		Each
Conductivity, Salinity, Temperature, Total Dissolved Solids (TDS)	1122T82	0000000

For Testing Oxidation Reduction Potential (ORP), pH, and Temperature

Image of Product. Front orientation. Chemistry Meters. Remote-Reading Multifunction Chemistry Meters , For Testing Oxidation Reduction Potential (ORP).

Oxidation reduction potential (ORP), pH, and temperature meters take three measurements. ORP measures the amount of dissolved oxygen in liquids. It determines how efficiently a liquid breaks down contaminants.

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

	Oxidation Reduction Potential (ORP)		pH
	Range, mV	Accuracy	Range, pH	Accuracy	Temp. Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean and Dirty Liquids



		-1,000 to 1,000	±0.2%	0 to 14	±0.01 pH	±0.9° F	32 to 212	IP57	CE Marked	7 1/2"	3 9/16"	1 5/16"	Yes	Canada	LCD	1122T14	0000000

Replacement Sensors

For Testing		Each
Oxidation Reduction Potential (ORP)	1122T23	0000000
pH	1122T62	000000

Remote-Reading Multifunction Chemistry Meters with PC Output

Test temperature, chemical concentration, contamination, and salt levels in liquid from up to 6 ft. away, then send the results to your computer for analysis. These meters include a USB cable that transfers up to 1,000 readings. Often used to test water quality, they work on both clean and dirty liquids—from tap water to wastewater. Conductivity tests measure the concentration of salts, nutrients, chemicals, and other substances. Total dissolved solids (TDS) tests report contaminant levels. Salinity tests determine the salt levels in liquid. The sensor is made of stainless steel, so it’s durable and resists breaking. IP67 rated, these meters are dust tight and withstand temporary submersion.

To prevent inaccurate results from changing temperatures, these meters automatically standardize temperature readings at 77° F. Temperature readings appear on screen with other measurements, so you won’t have to scroll through multiple screens. A data hold function freezes the current reading on the display.

To maintain accuracy of the meters, they come with calibration solutions and have a calibration button.

For Testing Conductivity, Resistivity, Salinity, Temperature, and Total Dissolved Solids (TDS)

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

	Conductivity		Resistivity		Salinity			Total Dissolved Solids (TDS)
	Range	Accuracy	Range, Mohm	Accuracy	Range, ppt	Accuracy	Temp. Accuracy	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean and Dirty Liquids



		0 mS to 200 mS	±1.5%	0 to 20	±1.5%	0 to 100	±1.5%	±0.9° F	0 ppt to 100 ppt	±0.1%	32 to 212	IP67	CE Marked	6 5/16"	3 3/16"	1 5/8"	Yes	Canada	LCD	14345T44	000000000

Replacement Sensors for Chemistry Meters

For Testing		Each
Conductivity, Resistivity, Salinity, Temperature, Total Dissolved Solids (TDS)	14345T45	0000000

Remote-Reading pH Meters

Monitor pH readings from your smartphone or tablet—download the app to view data up to 160 ft. away using Bluetooth. Made of durable nonglass, the sensor resists breaking. They are for use with dirty liquids, so they stand up to petrochemical, environmental, and agricultural testing. Rated IP67, they seal out dust and withstand temporary submersion. Use a calibration solution (not included) and the calibration setting in the app to maintain accuracy.

For Testing pH

Image of Product. Front orientation. Chemistry Meters. Remote-Reading pH Meters .

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

	Chemistry Meters														Buffer Solutions
		pH
	Sensor Material	Range, pH	Accuracy	ATC Range, ° F	Data Connection	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To		Each		Each
For Use With Dirty Liquids



		Plastic	0 to 14	±0.02 pH	32 to 176	Bluetooth	IP67	CE Marked	8 7/8"	1"	7/8"	Yes	Canada	1131T51	000000000	21315T398	000000

Replacement Sensors

Remote-Reading pH Meters with PC Output

Transmit pH readings to a PC for analysis. These meters have a sensor on a 6-ft. cable for taking remote readings of water and other clean liquids. They have automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate readings in fluctuating temperatures. Use the included calibration solution and calibration button to maintain accuracy.

For Testing pH and Temperature


LCD Display

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		pH
	Sensor Material	Range, pH	Accuracy	ATC Range, ° F	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		Plastic	-2 to 16	±0.01 pH	-22 to 260	CE Marked	6 5/16"	3 3/16"	1 5/8"	Yes	Canada	LCD	14345T72	0000000

Replacement Sensors

Water-Resistant Conductivity Meters

Don’t worry about dropping this meter in your tank when checking electrical conductivity—it floats and has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion. For use with water, hydroponic solutions, and other clean liquids, this meter measures a liquid's conductivity to indicate the concentration of salts, nutrients, chemicals, and other substances. It displays temperature in addition to conductivity. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

For Testing Conductivity

Image of Product. Front orientation. Chemistry Meters. Water-Resistant Conductivity Meters.

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Conductivity
	Sensor Material	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		304 Stainless Steel	0 μS to 1,999 μS	±1.5%	32 to 122	IP67	CE Marked	7 3/8"	1 7/8"	1 1/2"	Yes	Canada	LCD	13945T81	0000000

Replacement Sensors

Water-Resistant Dissolved Oxygen Meters

Check the oxygen levels of water and other clean liquids in harsh field conditions. This meter has a housing that meets IP57 for good resistance to dust and protection from temporary submersion. It has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use distilled water and the calibration button to maintain accuracy.

For Testing Dissolved Oxygen

Cannot Be Sold To—Import regulations restrict sales to the listed areas.

		Dissolved Oxygen, ppm
	Sensor Material	Range	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		Plastic	0 to 20	0.4	32 to 122	IP57	CE Marked	6 7/8"	1 3/8"	1 5/8"	Yes	Canada	LCD	13945T62	0000000

Replacement Sensors

Water-Resistant ORP Meters

Since this oxidation reduction potential (ORP) meter has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion, it’s often used to determine a solution’s ability to break down contaminants in harsh field conditions. For use with dirty liquids containing heavy metals, sulfides, and harsh chemicals, this meter is often used for wastewater treatment. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

For Testing Oxidation Reduction Potential (ORP)

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

		Oxidation Reduction Potential (ORP)
	Sensor Material	Range, mV	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Dirty Liquids



		Glass	-1,000 to 1,000	±2 mV	32 to 140	IP67	CE Marked	8"	4"	3"	Yes	Canada	LCD	13945T18	0000000

Replacement Sensors

Water-Resistant pH Meters

Check pH in harsh field conditions. These floating meters that have a housing that meets IP67 for complete resistance to dust and protection from temporary submersion. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a calibration solution and the calibration button to maintain accuracy. They do not include Calibration Solution.

For Testing pH

For Use With Clean Liquids—Meter for clean liquids is commonly used in pools and hydroponic solutions.

For Use With Dirty Liquids—Meter for dirty liquids stands up to wastewater, plating bath solutions, and other harsh liquids.

Cannot Be Sold to Canada—Meters cannot be sold to Canada due to import regulations.

		pH
	Sensor Material	Range, pH	Accuracy	ATC Range, ° F	Enclosure Rating	Certification	Ht.	Wd.	Dp.	Batteries Included	Cannot Be Sold To	Display Type		Each
For Use With Clean Liquids



		Glass	0 to 14	±0.1 pH	32 to 122	IP67	CE Marked	6 1/2"	1 1/2"	3/4"	Yes	Canada	LCD	13945T12	0000000


		For Use With Dirty Liquids



				Glass	-2 to 16	±0.01 pH	32 to 122	IP67	CE Marked	7"	—	—	Yes	Canada	LCD	13945T19	000000

Replacement Sensors