About Plastic
More
Wear- and Chemical-Resistant PEEK Sheets and Bars
![](/prerenderstable/mvPRE/contents/gfx/imagecache/850/8504k813p1-j03-digital@halfx_637005930992078882.png?ver=imagenotfound)
With superior wear resistance in repetitive processes, these sheets and bars resist wear caused by abrasion. PEEK is often used as a lightweight substitute for metal parts in chemical-processing applications.
For technical drawings and 3-D models, click on a part number.
- Color: Beige
- Temperature Range: -20° to 480° F
- Tensile Strength: 14,000-16,000 psi (Excellent)
- Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
- Hardness: Rockwell R126 (Hard)
- For Use Outdoors: No
- Specifications Met:
1/16" to 1/8" Thickness: 3-A Certified 20-27, FDA Compliant 21 CFR 177.2415
1/4" to 1 1/2" Thickness: FDA Compliant 21 CFR 177.2415, MIL-P-46183, UL 94 V-0
6" × 6" | 6" × 12" | 12" × 12" | |||||
---|---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Each | Each | Each | |||
1/16" | 0.002" to 0.005" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000000 |
5/64" | -0.004" to 0.004" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
3/32" | -0.004" to 0.006" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
1/8" | -0.005" to 0.005" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
1/4" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
3/8" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
1/2" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
5/8" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
3/4" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
1" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 00000000 |
1 1/4" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 00000000 |
1 1/2" | -0.01" to 0.025" | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 00000000 |
- Color: Beige
- Temperature Range: -20° to 480° F
- Tensile Strength: 14,000-16,000 psi (Excellent)
- Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
- Hardness: Rockwell R126 (Hard)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.2415, MIL-P-46183, UL 94 V-0
Wd. | Lengths, ft. | Per Ft. | |
1/4" Thick. (0" to 0.025") | |||
---|---|---|---|
1" | 00000000 | 000000 | |
1 1/2" | 00000000 | 00000 | |
2" | 00000000 | 00000 | |
2 1/2" | 00000000 | 00000 | |
3" | 00000000 | 00000 | |
4" | 00000000 | 000000 | |
3/8" Thick. (0" to 0.025") | |||
1" | 00000000 | 00000 | |
1 1/2" | 00000000 | 00000 | |
2" | 00000000 | 00000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 | |
1/2" Thick. (0" to 0.025") | |||
1" | 00000000 | 00000 | |
1 1/2" | 00000000 | 000000 | |
2" | 00000000 | 000000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 | |
5/8" Thick. (0" to 0.025") | |||
1" | 00000000 | 00000 | |
1 1/2" | 00000000 | 000000 | |
2" | 00000000 | 000000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 |
Wd. | Lengths, ft. | Per Ft. | |
3/4" Thick. (0" to 0.025") | |||
---|---|---|---|
1" | 00000000 | 0000000 | |
1 1/2" | 00000000 | 000000 | |
2" | 00000000 | 000000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 | |
1" Thick. (0" to 0.025") | |||
1" | 00000000 | 000000 | |
1 1/2" | 00000000 | 000000 | |
2" | 00000000 | 000000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 | |
1 1/4" Thick. (0" to 0.025") | |||
1" | 00000000 | 000000 | |
1 1/2" | 00000000 | 000000 | |
2" | 00000000 | 000000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 | |
1 1/2" Thick. (0" to 0.025") | |||
1" | 00000000 | 000000 | |
1 1/2" | 00000000 | 000000 | |
2" | 00000000 | 000000 | |
2 1/2" | 00000000 | 000000 | |
3" | 00000000 | 000000 | |
4" | 00000000 | 000000 |
Wear- and Chemical-Resistant PEEK Rods and Discs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/996/9969k14p1-j03-digital@halfx_637005942640386651.png?ver=imagenotfound)
- Color: Beige or Black
- Temperature Range: -20° to 480° F
- Tensile Strength: 14,000-16,000 psi (Excellent)
- Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
- Hardness: Rockwell R126 (Hard)
- For Use Outdoors: No
- Specifications Met:
Beige: ASTM D6262, FDA Compliant 21 CFR 177.2415, UL 94 V-0
Black: ASTM D6262, UL 94 V-0
Even when exposed to chemicals, these rods and discs remain wear resistant. Made of PEEK, they stand up to repetitive processes as well as abrasion. They’re sometimes used as a lightweight substitute for metal parts in high-stress applications.
For technical drawings and 3-D models, click on a part number.
Beige | Black | |||||
---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Lengths, ft. | Per Ft. | Per Ft. | ||
1/4" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 000000 | 00 |
1/4" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
3/8" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 000000 | 00 |
3/8" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
1/2" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 000000 | 00 |
1/2" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
5/8" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 000000 | 00 |
5/8" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
3/4" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 000000 | 00 |
3/4" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
1" | 0.000" to 0.003" | 1, 2, 3, 4 | 00000000 | 00000 | 000000 | 00 |
1" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 00000 |
1 1/4" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 000000 | 000000 | 00 |
1 1/4" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 000000 |
1 1/2" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 000000 | 000000 | 00 |
1 1/2" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 000000 |
2" | 0.000" to 0.005" | 1, 2, 3, 4 | 00000000 | 000000 | 000000 | 00 |
2" | 0.000" to 0.015" | 1, 2, 3, 4 | 000000 | 00 | 0000000 | 000000 |
2 1/2" | 0.000" to 0.015" | 1, 2, 3, 4 | 00000000 | 000000 | 000000 | 00 |
3" | 0.000" to 0.250" | 1, 2, 3, 4 | 0000000 | 000000 | 000000 | 00 |
4" | 0.000" to 0.250" | 1, 2, 3, 4 | 0000000 | 00000000 | 000000 | 00 |
Beige | Black | ||||
---|---|---|---|---|---|
Dia. | Dia. Tolerance | Each | Each | ||
3" Lg. | |||||
1" | 0.000" to 0.015" | 0000000 | 000000 | 0000000 | 000000 |
1 1/2" | 0.000" to 0.015" | 0000000 | 00000 | 0000000 | 00000 |
2" | 0.000" to 0.015" | 0000000 | 000000 | 0000000 | 000000 |
2 1/2" | 0.000" to 0.015" | 0000000 | 000000 | 000000 | 00 |
3" | 0.000" to 0.250" | 0000000 | 000000 | 000000 | 00 |
6" Lg. | |||||
1" | 0.000" to 0.015" | 0000000 | 00000 | 0000000 | 00000 |
1 1/2" | 0.000" to 0.015" | 0000000 | 000000 | 0000000 | 000000 |
2" | 0.000" to 0.015" | 0000000 | 000000 | 0000000 | 000000 |
2 1/2" | 0.000" to 0.015" | 0000000 | 000000 | 000000 | 00 |
3" | 0.000" to 0.250" | 0000000 | 000000 | 000000 | 00 |
9" Lg. | |||||
1" | 0.000" to 0.015" | 0000000 | 00000 | 0000000 | 00000 |
1 1/2" | 0.000" to 0.015" | 0000000 | 000000 | 0000000 | 000000 |
2" | 0.000" to 0.015" | 0000000 | 000000 | 0000000 | 000000 |
2 1/2" | 0.000" to 0.015" | 0000000 | 000000 | 000000 | 00 |
3" | 0.000" to 0.250" | 0000000 | 000000 | 000000 | 00 |
Wear- and Chemical-Resistant PEEK Tubes
- Color: Beige
- Temperature Range: -75° to 500° F
- Tensile Strength: 14,100 psi (Excellent)
- Impact Strength: 1.57 ft.-lbs./in. (Poor)
- Hardness: Rockwell R70 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2415
Sometimes used as a lightweight substitute for metal parts in chemical-processing applications, these tubes resist wear from repetitive processes, as well as wear caused by abrasion. The OD is oversized and the ID is undersized for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/866/8668k147p1-j03-digital@halfx_637005939351728001.png?ver=imagenotfound)
OD | OD Tolerance | ID | ID Tolerance | Lengths, ft. | Per Ft. | |
1/16" Wall Thick. | ||||||
---|---|---|---|---|---|---|
3/8" | 0" to 0.015" | 1/4" | -0.015" to 0" | 000000 | 000000 | |
1/8" Wall Thick. | ||||||
1/2" | 0" to 0.02" | 1/4" | -0.02" to 0" | 000000 | 00000 | |
1/4" Wall Thick. | ||||||
3/4" | 0" to 0.025" | 1/4" | -0.025" to 0" | 000000 | 00000 | |
1" | 0" to 0.03" | 1/2" | -0.03" to 0" | 000000 | 00000 | |
1 1/2" | 0" to 0.035" | 1" | -0.035" to 0" | 000000 | 000000 | |
1/2" Wall Thick. | ||||||
2" | 0" to 0.04" | 1" | -0.04" to 0" | 000000 | 000000 |
Metal-Detectable Wear- and Chemical-Resistant PEEK Bars
![](/prerenderstable/mvPRE/contents/gfx/imagecache/777/7779n132_4cac8ec8-b27b-4a9b-ba20-f46263dc2616@halfx_1677535765.png?ver=imagenotfound)
- Color: Blue
- Temperature Range: 0° to 480° F
- Tensile Strength: 15,000 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Rockwell M106 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2415, FDA Compliant 21 CFR 178.3297
Common in food and pharmaceutical plants, these PEEK bars help you identify contaminated batches. They contain metal and chemical additives that set off metal detectors and show up on X-rays if they fall into your line, which help you comply with Hazard Analysis and Critical Control Point (HACCP) programs. All are bright blue in color, so you can find and remove them quickly. They’re also FDA compliant for direct contact with food.
These PEEK bars stand up to wear from abrasion and repetitive processes. They’re also resistant to extended contact with water, high-temperature steam, and clean-in-place (CIP) cycles with harsh cleaners and sanitizers. Due to their light weight, they’re commonly substituted for metal parts in high-stress or chemical-processing applications where weight is important.
For technical drawings and 3-D models, click on a part number.
Metal-Detectable Wear- and Chemical-Resistant PEEK Rods
![](/prerenderstable/mvPRE/contents/gfx/imagecache/866/8669k761-@halfx_637377655732170987.png?ver=imagenotfound)
- Color: Blue
- Temperature Range: 0° to 480° F
- Tensile Strength: 15,000 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Rockwell M106 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2415, FDA Compliant 21 CFR 178.3297
Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility. They contain metal and chemical additives that set off metal detectors and show up on X-rays if they fall into your line, which help you comply with Hazard Analysis and Critical Control Point (HACCP) programs. Bright blue in color, you can find and remove them quickly. All are FDA compliant for direct contact with food.
These PEEK rods resist wear from abrasion and repetitive processes. They also stand up to extended contact with water, high-temperature steam, and clean-in-place (CIP) cycles with harsh cleaners and sanitizers. Since they’re lightweight, they’re often used as a substitute for metal parts in high-stress or chemical-processing applications where weight matters.
For technical drawings and 3-D models, click on a part number.
Slippery Carbon-Filled Wear- and Chemical-Resistant PEEK
![](/prerenderstable/mvPRE/contents/gfx/imagecache/855/8554k4p1-j03-digital@halfx_637044205697414069.png?ver=imagenotfound)
- Color: Black
- Max. Temperature: 480° F
- Tensile Strength: 11,000 psi (Good)
- Impact Strength: 0.7 ft-lbs./in.
- Hardness: Rockwell M85 (Hard)
- For Use Outdoors: Yes
Carbon enhances the stiffness of these rods, while the addition of PTFE ensures a slippery surface. PEEK is chemical resistant and stands up to wear caused by rubbing in repetitive processes, as well as by abrasion. It is sometimes used as a lightweight substitute for metal.
For technical drawings and 3-D models, click on a part number.
Durable Glass-Filled Wear- and Chemical-Resistant PEEK
![](/prerenderstable/mvPRE/contents/gfx/imagecache/866/8669k761p1-j03-digital@halfx_637005933441688685.png?ver=imagenotfound)
- Color: Beige
- Temperature Range: 32° to 480° F
- Tensile Strength: 14,000 psi (Excellent)
- Impact Strength: 0.8-1.8 ft.-lbs./in. (Poor)
- Hardness: Rockwell R126 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6262, UL 94 V-0
A glass filler is added to these PEEK rods for increased durability over standard PEEK in high-stress structural applications. PEEK is chemical resistant and stands up to wear caused by rubbing in repetitive processes, as well as by abrasion. It is sometimes used as a lightweight substitute for metal.
For technical drawings and 3-D models, click on a part number.
Machinable Ceramic-Filled Wear- and Chemical-Resistant PEEK
![](/prerenderstable/mvPRE/contents/gfx/imagecache/504/5040n15-@halfx_637515770835143006.png?ver=imagenotfound)
- Color: White
- Temperature Range: -100° to 500° F
- Tensile Strength: 14,100 psi (Excellent)
- Impact Strength: 0.66 ft.-lbs./in. (Poor)
- For Use Outdoors: No
These PEEK sheets can be machined to tight tolerances for use in electrical and semiconductor parts, such as test sockets. With a ceramic filler, they have excellent hardness and rigidity. The filler also acts as an effective barrier against gas and fluid permeation. These sheets maintain their shape when exposed to temperature changes. They also withstand wear from abrasion and repetitive processes.
For technical drawings and 3-D models, click on a part number.
Machine Key Stock
![](/prerenderstable/mvPRE/contents/gfx/imagecache/988/98830a300p1-b02-digital@halfx_636929185096747334.png?ver=imagenotfound)
Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
PEEK plastic key stock resists chemicals, moisture, and high temperatures. It meets MIL-P-46183 Type 1 specifications for nonreinforced plastic.
Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
For technical drawings and 3-D models, click on a part number.