About Plastic
More
Wear- and Chemical-Resistant PEEK Sheets and Bars
With superior wear resistance in repetitive processes, these sheets and bars resist wear caused by abrasion. PEEK is often used as a lightweight substitute for metal parts in chemical-processing applications.
For technical drawings and 3-D models, click on a part number.
- Color: Beige
- Temperature Range: -20° to 480° F
- Tensile Strength: 14,000-16,000 psi (Excellent)
- Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
- Hardness: Rockwell R126 (Hard)
- For Use Outdoors: No
- Specifications Met:
1/16" to 1/8" Thickness: 3-A Certified 20-27, FDA Compliant 21 CFR 177.2415
1/4" to 1 1/2" Thickness: FDA Compliant 21 CFR 177.2415, MIL-P-46183, UL 94 V-0
6" × 6" | 12" × 12" | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
| 1/16" | 0.002" to 0.005" | 0000000 | 000000 | 0000000 | 0000000 |
| 5/64" | -0.004" to 0.004" | 0000000 | 00000 | 0000000 | 000000 |
| 3/32" | -0.004" to 0.006" | 0000000 | 00000 | 0000000 | 000000 |
| 1/8" | -0.005" to 0.005" | 0000000 | 000000 | 0000000 | 000000 |
| 1/4" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 000000 |
| 3/8" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 000000 |
| 1/2" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 000000 |
| 5/8" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 000000 |
| 3/4" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 000000 |
| 1" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 00000000 |
| 1 1/4" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 00000000 |
| 1 1/2" | -0.01" to 0.025" | 0000000 | 000000 | 0000000 | 00000000 |
- Color: Beige
- Temperature Range: -20° to 480° F
- Tensile Strength: 14,000-16,000 psi (Excellent)
- Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
- Hardness: Rockwell R126 (Hard)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.2415, MIL-P-46183, UL 94 V-0
Wear- and Chemical-Resistant PEEK Film
In addition to offering excellent chemical resistance, this PEEK film is strong and wear resistant.
For technical drawings and 3-D models, click on a part number.
- Color: Semi-Clear Beige
- Max. Temperature: 460° F
- Tensile Strength: 17,400 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Not Rated (Hard)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.2415
6" × 6" | 12" × 12" | 24" × 24" | |||||
|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | Each | |||
| 0.003" | -0.0003" to 0.0003" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.005" | -0.0005" to 0.0005" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.01" | -0.001" to 0.001" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.015" | -0.0015" to 0.0015" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| 0.02" | -0.002" to 0.002" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| 0.03" | -0.003" to 0.003" | 00000000 | 00000 | 00000000 | 000000 | 000000 | 00 |
- Color: Semi-Clear Beige
- Temperature Range: -40° to 350° F
- Tensile Strength: 17,400 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Not Rated (Hard)
- For Use Outdoors: Yes
Metal-Detectable Wear- and Chemical-Resistant PEEK Bars
- Color: Blue
- Temperature Range: 0° to 480° F
- Tensile Strength: 15,000 psi (Excellent)
- Impact Strength: Not Rated
- Hardness: Rockwell M106 (Extra Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2415, FDA Compliant 21 CFR 178.3297
Common in food and pharmaceutical plants, these PEEK bars help you identify contaminated batches. They contain metal and chemical additives that set off metal detectors and show up on X-rays if they fall into your line, which help you comply with Hazard Analysis and Critical Control Point (HACCP) programs. All are bright blue in color, so you can find and remove them quickly. They’re also FDA compliant for direct contact with food.
These PEEK bars stand up to wear from abrasion and repetitive processes. They’re also resistant to extended contact with water, high-temperature steam, and clean-in-place (CIP) cycles with harsh cleaners and sanitizers. Due to their light weight, they’re commonly substituted for metal parts in high-stress or chemical-processing applications where weight is important.
For technical drawings and 3-D models, click on a part number.
Machinable Ceramic-Filled Wear- and Chemical-Resistant PEEK
- Color: White
- Temperature Range: -100° to 500° F
- Tensile Strength: 14,100 psi (Excellent)
- Impact Strength: 0.66 ft.-lbs./in. (Poor)
- For Use Outdoors: No
These PEEK sheets can be machined to tight tolerances for use in electrical and semiconductor parts, such as test sockets. With a ceramic filler, they have excellent hardness and rigidity. The filler also acts as an effective barrier against gas and fluid permeation. These sheets maintain their shape when exposed to temperature changes. They also withstand wear from abrasion and repetitive processes.
For technical drawings and 3-D models, click on a part number.
High-Temperature Plastic Selector Packs
Includes one piece of each material listed.
For technical drawings and 3-D models, click on a part number.
| Material | Wd. | Lg. | Pkg. Qty. | Pkg. | |
| PEEK Plastic, PFA Plastic, Polyimide Plastic, Torlon PAI Plastic, Ultem PEI Plastic | 2" | 2" | 5 | 0000000 | 0000000 |