About Hammers
More
Ball Peen Hammers
Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. For replacement handles, see Hickory Hammer Handles and Fiberglass Hammer Handles.
Hickory and beech handles resist vibration. Steel handles are stronger than wooden handles but have less vibration resistance. Fiberglass handles combine the strength of steel with the vibration resistance of wood.
Textured and ribbed grips provide slip resistance.
Hammers with a tether ring are a good choice for working at height. Hook the ring onto a carabiner or lanyard to prevent the hammer from falling to the ground if dropped.
Head Wt., oz. | Face Dia. | Overall Lg. | Face Material | Handle Replaceable | Features | Each | |
Hickory Handle with Plain Grip | |||||||
---|---|---|---|---|---|---|---|
2 | 1/2" | 10" | Steel | Replaceable | __ | 0000000 | 00000 |
4 | 3/4" | 10 1/4" | Steel | Replaceable | __ | 0000000 | 00000 |
8 | 1" | 11 3/4" | Steel | Replaceable | __ | 0000000 | 00000 |
12 | 1 1/8" | 12" | Steel | Replaceable | __ | 0000000 | 00000 |
16 | 1 1/4" | 13 3/4" | Steel | Replaceable | __ | 0000000 | 00000 |
20 | 1 1/4" | 15" | Steel | Replaceable | __ | 0000000 | 00000 |
24 | 1 3/8" | 15 1/4" | Steel | Replaceable | __ | 0000000 | 00000 |
32 | 1 1/2" | 15 3/4" | Steel | Replaceable | __ | 0000000 | 00000 |
40 | 1 5/8" | 16" | Steel | Replaceable | __ | 0000000 | 00000 |
48 | 1 3/4" | 16" | Steel | Replaceable | __ | 0000000 | 00000 |
Beech Handle with Plain Grip | |||||||
1 | 3/8" | 8" | Steel | Nonreplaceable | __ | 0000000 | 0000 |
Steel Handle with Textured Grip | |||||||
4 | 3/4" | 10" | Steel | Nonreplaceable | __ | 0000000 | 00000 |
8 | 1" | 11" | Steel | Nonreplaceable | __ | 0000000 | 00000 |
12 | 1 1/8" | 11" | Steel | Nonreplaceable | __ | 0000000 | 00000 |
16 | 1 1/4" | 13" | Steel | Nonreplaceable | __ | 0000000 | 00000 |
24 | 1 1/2" | 13 1/2" | Steel | Nonreplaceable | __ | 0000000 | 00000 |
32 | 1 5/8" | 14 1/2" | Steel | Nonreplaceable | __ | 0000000 | 00000 |
Fiberglass Handle with Smooth Grip | |||||||
4 | 3/4" | 11" | Steel | Replaceable | __ | 0000000 | 00000 |
8 | 1" | 11" | Steel | Replaceable | __ | 0000000 | 00000 |
12 | 1" | 12" | Steel | Replaceable | __ | 0000000 | 00000 |
24 | 1 1/4" | 14 3/4" | Steel | Replaceable | __ | 0000000 | 00000 |
Fiberglass Handle with Textured Grip | |||||||
16 | 1 3/8" | 13" | Steel | Nonreplaceable | Tether Ring | 0000000 | 00000 |
32 | 1 1/4" | 15" | Steel | Nonreplaceable | Tether Ring | 0000000 | 00000 |
Fiberglass Handle with Ribbed Grip | |||||||
16 | 1 1/8" | 13 3/4" | Steel | Replaceable | __ | 0000000 | 00000 |
32 | 1 3/8" | 14" | Steel | Replaceable | __ | 0000000 | 00000 |
Ball-Peen Hammer Sets
To suit a range of applications, these sets include hammers in a range of sizes and weights. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. All have a textured grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.
No. of Pieces | Face Material | Head Wt., oz. | Face Dia. | Overall Lg. | Handle Replaceable | Container Type | Each | |
Fiberglass Handle with Textured Grip | ||||||||
---|---|---|---|---|---|---|---|---|
4 | Steel | 8, 12, 16, 24 | 1", 1 1/8", 1 1/4" | 11 1/2", 12", 13", 14" | Replaceable | Carrying Case | 0000000 | 0000000 |
Nonsparking Ball Peen Hammers
The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. All have a textured grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
Head Wt., oz. | Face Dia. | Overall Lg. | Face Material | Handle Replaceable | Specifications Met | Each | |
Fiberglass Handle with Textured Grip | |||||||
---|---|---|---|---|---|---|---|
4 | 3/4" | 9 3/4" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
12 | 1" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 00000 |
16 | 1 1/4" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 00000 |
24 | 1 1/4" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 00000 |
32 | 1 1/2" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
36 | 1 5/8" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
44 | 1 3/4" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
Dead Blow Ball Peen Hammers
These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Their fluorescent color makes them easy to see. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. A textured grip provides slip resistance.
Head Wt., oz. | Face Dia. | Overall Lg. | Face Material | Head Material | Handle Color | Handle Replaceable | Each | |
Polyurethane Rubber Handle with Steel Core—Textured Grip | ||||||||
---|---|---|---|---|---|---|---|---|
32 | 1 3/4" | 13 3/4" | Steel | Polyurethane Rubber | Fluorescent Orange | Nonreplaceable | 0000000 | 000000 |
Sheet Metal Forming Hammers
Also known as body and fender tools, these hammers are excellent for forming and repairing dents in sheet metal components.
Serrated face prevents the head from slipping when striking.
Hickory handles resist vibration. Fiberglass handles combine the strength of steel with the vibration resistance of wood and have a textured grip for slip resistance.
Head Wt., oz. | Round Face Dia. | Rectangular Face Lg. | Rectangular Face Wd. | Round Face Texture | Rectangular Face Texture | Face Material | Overall Lg. | Each | ||
Hickory Handle | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
A | 10 | 1 1/4" | 1 1/8" | 1 1/8" | Serrated | Smooth | Steel | 12" | 000000 | 000000 |
A | 14 | 1 1/4" | 1 3/16" | 1 3/16" | Smooth | Smooth | Steel | 12" | 0000000 | 00000 |
Fiberglass Handle | ||||||||||
A | 10 | 1 1/4" | 1 1/8" | 1 1/8" | Serrated | Smooth | Steel | 12" | 0000000 | 00000 |
A | 14 | 1 1/4" | 1 3/16" | 1 3/16" | Smooth | Smooth | Steel | 12" | 0000000 | 00000 |
Place against the face of your workpiece and strike with a hammer. The blow will transfer to the workpiece without damaging the finish. Also known as dinging spoons, these tools are often used to smooth ridges and dings in sheet metal.
Style B have large, slightly curved faces for efficient finishing and shaping of sheet metal edges.
Place on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.
A long handle lets you access hard-to-reach spots. Place the block on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.
Block | |||||||
---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Overall Lg. | Wt., lbs. | Material | Each | |
3" | 2 1/2" | 1" | 14" | 4 1/4 | Steel | 0000000 | 000000 |
Blacksmiths' Hammers
Strike metal, concrete, and stone with the flat end of these hammers; the wedge-shaped end is for bending and shaping metal. They're also known as cross-peen hammers. For replacement handles, see Hickory Hammer Handles.
Hickory handles resist vibration. Steel handles are stronger than hickory handles but have less vibration resistance. Fiberglass handles resist breakage if you miss your mark.
Textured and ribbed grips provide slip resistance.
Head Wt., lbs. | Face Dia. | Overall Lg. | Face Material | Handle Replaceable | Each | |
Hickory Handle—Plain Grip | ||||||
---|---|---|---|---|---|---|
3 | 1 3/4" | 15" | Steel | Replaceable | 000000 | 000000 |
4 | 1 7/8" | 15" | Steel | Replaceable | 000000 | 00000 |
Steel Handle—Textured Grip | ||||||
2 | 1 3/8" | 14" | Steel | Nonreplaceable | 0000000 | 00000 |
3 | 1 3/4" | 16" | Steel | Nonreplaceable | 0000000 | 00000 |
Fiberglass Handle—Ribbed Grip | ||||||
3 | 1 5/8" | 14" | Steel | Replaceable | 0000000 | 00000 |
4 | 1 3/4" | 14" | Steel | Replaceable | 0000000 | 00000 |
Nonsparking Blacksmiths' Hammers
The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the flat end of the head to strike metal, concrete, and stone; the wedge-shaped end is for shaping and bending metal. These tools are also known as cross-peen hammers. A textured grip provides slip resistance. For replacement handles, see Fiberglass Hammer Handles.
Warning: Do not use these tools in direct contact with acetylene.
Head Wt., lbs. | Face Lg. | Face Wd. | Overall Lg. | Face Material | Handle Replaceable | Specifications Met | Each | |
Fiberglass Handle with Textured Grip | ||||||||
---|---|---|---|---|---|---|---|---|
1 1/2 | 1 5/16" | 1 5/16" | 14" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 0000000 |
2 1/2 | 1 1/2" | 1 1/2" | 15" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
3 1/2 | 1 7/8" | 1 7/8" | 15" | Aluminum-Bronze | Replaceable | FM Approved | 0000000 | 000000 |
Delicate Metal Forming Hammers
Also known as jeweler's hammers, these have smooth steel faces for precise forming and finishing work on delicate metal workpieces.
Rectangular Face | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Head Wt., oz. | Round Face Dia. | Lg. | Wd. | Overall Lg. | Face Material | Face Texture | Handle Material | Grip Style | Handle Replaceable | Each | |
Round Face | |||||||||||
6 | 1" | __ | __ | 11" | Steel | Smooth | Ash | Plain | Replaceable | 0000000 | 000000 |
9 | 1" | __ | __ | 11 1/2" | Steel | Smooth | Ash | Plain | Replaceable | 0000000 | 00000 |
Rectangular Face | |||||||||||
13 | __ | 3/4" × 7/8" | 1 3/8" × 1 3/8" | 12 1/4" | Steel | Smooth | Ash | Plain | Replaceable | 0000000 | 00000 |
Round × Rectangular Face | |||||||||||
13 | 1" | 1/4" | 1 1/2" | 12 1/4" | Steel | Smooth | Ash | Plain | Replaceable | 0000000 | 00000 |
Riveting Hammers
Set solid rivets by hand. These tools are also known as paneing, setting, and seaming hammers. Use the flat end of the head to drive rivets and pins. The other end of the head has a wedge shape for creating corners and seams in sheet metal. For replacement handles, see Hickory Hammer Handles.
Hickory handles resist vibration. Steel handles are stronger than hickory handles but have less vibration resistance. Fiberglass handles combine the strength of steel with the vibration resistance of hickory.
Textured grips provide slip resistance.
Head Wt., lbs. | Face Dia. | Face Lg. | Face Wd. | Overall Lg. | Face Material | Handle Replaceable | Each | ||
Hickory Handle with Plain Grip | |||||||||
---|---|---|---|---|---|---|---|---|---|
A | 1/2 | 11/16" | __ | __ | 11" | Steel | Replaceable | 000000 | 000000 |
A | 3/4 | 13/16" | __ | __ | 13 1/2" | Steel | Replaceable | 000000 | 00000 |
A | 1 | 7/8" | __ | __ | 14" | Steel | Replaceable | 000000 | 00000 |
B | 1 | __ | 13/16" | 13/16" | 13 1/2" | Steel | Replaceable | 000000 | 00000 |
Steel Handle with Textured Grip | |||||||||
C | 3/4 | __ | 13/16" | 3/4" | 11" | Steel | Nonreplaceable | 000000 | 00000 |
C | 1 1/4 | __ | 15/16" | 7/8" | 12" | Steel | Nonreplaceable | 000000 | 00000 |
Fiberglass Handle with Textured Grip | |||||||||
D | 1 | 1" | __ | __ | 12 1/2" | Steel | Nonreplaceable | 0000000 | 00000 |
Air-Powered Sheet Metal Forming Hammers
These air-powered tools remove dents, smooth out ridges, and shape sheet metal more efficiently than manual hammers. Fast, controlled blows allow you to create a smooth, even finish. Hammers include attachments with different radius sizes to form a variety of shapes and finishes. They have a sturdy metal frame to keep the hammer in place and a foot pedal to control the speed, leaving both hands free to guide the workpiece. An automatic oiler keeps the machine running smoothly.
For Max. Thick. | Air Inlet | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Radius Sizes Included | Steel | Aluminum | Throat Dp. | Clearance Over Die | Recommended Operating Air Pressure, psi | Max. Blows per Minute | Average Air Consumption, cfm | Coupling Size | Connection Style | Gender | For Air Hose ID | Face Material | Ht. | Wd. | Dp. | Each | |
For Aluminum, Stainless Steel, Steel | |||||||||||||||||
3/4" 1 1/2" 2" 3" 4" 6" 8" 12" Flat | 3/64" | 1/16" | 24" | 1 1/2" | 105-120 | 4,600 | 12 | 3/8 | Quick Disconnect | Male | 3/8" | Stainless Steel | 56" | 36" | 33" | 0000000 | 000000000 |