About Perforated Sheets
More
Steel Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/925/9255t191-@halfx_637329144733081112.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/925/9255t841-@halfx_637329143921449289.png?ver=imagenotfound)
Use for machine guards and protective panels in noncorrosive environments. Steel is strong and wear resistant. It has good weldability and formability.
For technical drawings and 3-D models, click on a part number.
Hole Dia. | Open Area | Hole Center-to-Center | 24" × 24" | 36" × 40" | 48" × 48" | |
0.024" Thick. (24 Gauge) | ||||||
---|---|---|---|---|---|---|
0.033" | 20% | 0.077" | 0000000 | |||
0.045" | 28% | 0.086" | 0000000 | |||
0.03" Thick. (22 Gauge) | ||||||
0.05" | 26% | 0.094" | 0000000 | |||
0.0625" | 23% | 0.125" | 0000000 | |||
0.078" | 45% | 0.109" | 0000000 | |||
0.093" | 33% | 0.156" | 0000000 | |||
0.125" | 40% | 0.188" | 0000000 | |||
0.156" | 63% | 0.188" | 0000000 | |||
0.036" Thick. (20 Gauge) | ||||||
0.0625" | 23% | 0.125" | 0000000 | |||
0.0625" | 30% | 0.109" | 0000000 | |||
0.0625" | 41% | 0.094" | 0000000 | |||
0.075" | 51% | 0.1" | 0000000 | |||
0.078" | 45% | 0.109" | 0000000 | |||
0.093" | 33% | 0.156" | 0000000 | |||
0.125" | 40% | 0.188" | 0000000 | |||
0.14" | 51% | 0.188" | 0000000 | |||
0.156" | 63% | 0.188" | 0000000 | |||
0.1875" | 51% | 0.25" | 0000000 | |||
0.25" | 40% | 0.375" | 0000000 | |||
0.25" | 58% | 0.313" | 0000000 | |||
0.048" Thick. (18 Gauge) | ||||||
0.0625" | 23% | 0.125" | 0000000 | |||
0.0625" | 30% | 0.109" | 0000000 | |||
0.078" | 36% | 0.125" | 00000000 | |||
0.093" | 33% | 0.156" | 00000000 | |||
0.125" | 40% | 0.188" | 00000000 | |||
0.14" | 51% | 0.188" | 00000000 | |||
0.156" | 46% | 0.219" | 00000000 | |||
0.1875" | 51% | 0.25" | 00000000 | |||
0.25" | 58% | 0.313" | 00000000 | |||
0.06" Thick. (16 Gauge) | ||||||
0.0625" | 23% | 0.125" | 00000000 | |||
0.0625" | 30% | 0.109" | 00000000 | |||
0.078" | 36% | 0.125" | 00000000 | |||
0.093" | 33% | 0.156" | 00000000 | |||
0.125" | 40% | 0.188" | 00000000 | |||
0.14" | 51% | 0.188" | 00000000 | |||
0.156" | 46% | 0.219" | 00000000 | |||
0.156" | 63% | 0.188" | 00000000 | |||
0.1875" | 33% | 0.313" | 00000000 | |||
0.1875" | 51% | 0.25" | 00000000 | |||
0.25" | 40% | 0.375" | 00000000 | |||
0.25" | 58% | 0.313" | 00000000 | |||
0.3125" | 47% | 0.438" | 00000000 | |||
0.375" | 40% | 0.563" | 00000000 | |||
0.5" | 48% | 0.688" | 00000000 | |||
0.75" | 51% | 1" | 00000000 | |||
0.075" Thick. (14 Gauge) | ||||||
0.25" | 40% | 0.375" | 00000000 | |||
0.375" | 40% | 0.563" | 00000000 | |||
0.5" | 48% | 0.688" | 00000000 | |||
1/4" Thick. | ||||||
0.25" | 40% | 0.375" | 00000000 |
High-Flow Steel Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/927/92725t22-@halfx_637338663149119457.png?ver=imagenotfound)
Hexagonal holes provide a large open area for high-flow applications. Steel is strong and wear resistant. It has good weldability and formability.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/935/9358t631-@halfx_637329231479472918.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/935/9358t491-@halfx_637338493573987477.png?ver=imagenotfound)
304 stainless steel has good corrosion and abrasion resistance as well as weldability and formability. It’s often used in chemical and food-processing equipment.
316 stainless steel has excellent corrosion and abrasion resistance and good weldability and formability. It can withstand corrosive solution and harsh cleaning and is often used in food-processing applications.
For technical drawings and 3-D models, click on a part number.
Hole Dia. | Open Area | Hole Center-to-Center | 24" × 24" | 36" × 40" | 48" × 48" | |
0.024" Thick. (24 Gauge) | ||||||
---|---|---|---|---|---|---|
0.0625" | 30% | 0.109" | 0000000 | |||
0.03" Thick. (22 Gauge) | ||||||
0.0625" | 23% | 0.125" | 0000000 | |||
0.0625" | 41% | 0.094" | 0000000 | |||
0.0937" | 35% | 0.156" | 0000000 | |||
0.125" | 40% | 0.188" | 0000000 | |||
0.25" | 58% | 0.313" | 0000000 | |||
0.036" Thick. (20 Gauge) | ||||||
0.156" | 63% | 0.188" | 0000000 | |||
0.1875" | 51% | 0.25" | 0000000 | |||
0.25" | 40% | 0.375" | 0000000 | |||
0.25" | 58% | 0.313" | 0000000 | |||
0.048" Thick. (18 Gauge) | ||||||
0.094" | 33% | 0.156" | 0000000 | |||
0.125" | 40% | 0.188" | 0000000 | |||
0.1562" | 64% | 0.188" | 0000000 | |||
0.1875" | 51% | 0.25" | 0000000 | |||
0.25" | 40% | 0.375" | 0000000 | |||
0.25" | 58% | 0.313" | 0000000 | |||
0.06" Thick. (16 Gauge) | ||||||
0.0937" | 35% | 0.156" | 0000000 | |||
0.125" | 40% | 0.188" | 0000000 | |||
0.1875" | 51% | 0.25" | 0000000 | |||
0.25" | 40% | 0.375" | 0000000 | |||
0.25" | 58% | 0.313" | 0000000 | |||
0.075" Thick. (14 Gauge) | ||||||
0.125" | 40% | 0.188" | 0000000 | |||
0.25" | 40% | 0.375" | 0000000 | |||
0.12" Thick. (11 Gauge) | ||||||
0.25" | 40% | 0.375" | 0000000 |
36" × 40" | ||||
---|---|---|---|---|
Hole Dia. | Open Area | Hole Center-to-Center | Each | |
0.03" Thick. (22 Gauge) | ||||
0.0625" | 41% | 0.094" | 0000000 | 0000000 |
0.125" | 40% | 0.188" | 0000000 | 000000 |
0.036" Thick. (20 Gauge) | ||||
0.156" | 63% | 0.188" | 0000000 | 000000 |
0.048" Thick. (18 Gauge) | ||||
0.094" | 33% | 0.156" | 0000000 | 000000 |
0.125" | 40% | 0.188" | 0000000 | 000000 |
0.06" Thick. (16 Gauge) | ||||
0.125" | 40% | 0.188" | 0000000 | 000000 |
0.1875" | 51% | 0.25" | 0000000 | 000000 |
0.25" | 58% | 0.313" | 0000000 | 000000 |
0.075" Thick. (14 Gauge) | ||||
0.125" | 40% | 0.188" | 0000000 | 000000 |
0.12" Thick. (11 Gauge) | ||||
0.25" | 40% | 0.375" | 0000000 | 00000000 |
Small-Particle-Filtering Stainless Steel Perforated Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/923/92315t101-@halfx_637575484887339474.png?ver=imagenotfound)
Trap small particles in low-flow applications—these sheets have tiny holes and a small open area. Holes meet a precision size tolerance. Sheets have an unperforated border. 316 stainless steel has excellent corrosion and abrasion resistance and good weldability and formability.
For technical drawings and 3-D models, click on a part number.
Flat and L-Shaped Bolt-Together Framing and Fittings
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/466/4664t301c1-i02f-digital-master1570138744-p9@halfx_637057362135305251.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/896/8968k22-1626268158-p9@halfx_637618469832121927.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/466/4664t302c1-i02f-digital-master1570138744-p9@halfx_637057320948506214.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/466/4664t78--7b5e50594a41631042996-p9@halfx_637666218062503115.png?ver=imagenotfound)
Zinc-plated steel rails are more corrosion resistant in wet environments than powder-coated steel.
Galvanized steel rails have better corrosion resistance in wet environments than zinc-plated steel and can be used outdoors.
304 stainless steel rails are more corrosion resistant than galvanized steel. They also have good chemical resistance.
Wd. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (B) | Thick. | Material | Color | 1 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 8 ft. | |
Flat | |||||||||||
1 3/8" | __ | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
1 3/8" | __ | 0.08" | Zinc-Plated Steel | __ | 0000000 | ||||||
1 3/8" | __ | 0.08" | 304 Stainless Steel | __ | 0000000 | ||||||
2 1/4" | __ | 0.0469" | Galvanized Steel | __ | 0000000 | ||||||
2 3/4" | __ | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
L-Shaped | |||||||||||
1 1/4" | 1 1/4" | 0.0469" | Galvanized Steel | __ | 0000000 | ||||||
1 1/4" | 1 1/4" | 0.07" | Powder-Coated Steel | Blue | 0000000 | ||||||
1 1/2" | 1 1/2" | 0.074" | Zinc-Plated Steel | __ | 0000000 | ||||||
1 1/2" | 1 1/2" | 0.074" | 304 Stainless Steel | __ | 0000000 | ||||||
1 1/2" | 1 1/2" | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
1 1/2" | 2 1/4" | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
1 7/8" | 1 7/8" | 0.078" | Powder-Coated Steel | Blue | 0000000 |
Green Aerosol Touch-Up Paint for Powder-Coated Steel Rails (12 oz.) | 00000000 | Each | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/466/4664t22p2-i02f-master1570138743@halfx_637057351757919401.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/466/4664t22p1-h03a-digitall@halfx_636608131465976050.png?ver=imagenotfound)
Surface bracket connects rails.
Lg. | Thick. | Material | Each | |
6" | 0.08" | Galvanized Steel | 0000000 | 00000 |
Steel Bolt-Together Framing and Fittings
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t123-@halfx_637291217619049278.png?ver=imagenotfound)
Rails have bolt holes on all four sides. Connect multiple rails with brackets or slide one length of rail into the next larger size and bolt together using curved-bolt or locking-pin connectors. Select connectors based on the larger size rail in the connection.
Galvanized steel rails have good corrosion resistance in wet environments.
Steel rails are lightly oiled.
Rail | ||||||||
---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Wall Thick. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | 12 ft. | |
Galvanized Steel | ||||||||
1" | 1" | 0.083" | 00000000 | |||||
1" | 1" | 0.105" | 00000000 | |||||
1 1/4" | 1 1/4" | 0.083" | 00000000 | |||||
1 1/4" | 1 1/4" | 0.105" | 00000000 | |||||
1 1/2" | 1 1/2" | 0.083" | 00000000 | |||||
1 1/2" | 1 1/2" | 0.105" | 00000000 | |||||
1 3/4" | 1 3/4" | 0.105" | 00000000 | |||||
2" | 2" | 0.105" | 00000000 | |||||
2 1/4" | 2 1/4" | 0.105" | 00000000 | |||||
2 1/2" | 2 1/2" | 0.105" | 00000000 | |||||
Steel | ||||||||
1 1/2" | 1 1/2" | 0.105" | 00000000 | |||||
1 3/4" | 1 3/4" | 0.105" | 00000000 | |||||
2" | 2" | 0.105" | 00000000 | |||||
2 1/4" | 2 1/4" | 0.105" | 00000000 | |||||
2 1/2" | 2 1/2" | 0.105" | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t125-@halfx_637291219032327802.png?ver=imagenotfound)
Telescoping rail sets include two rails that can be nested and locked together.
Rail | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Outer Ht. | Outer Wd. | Inner Ht. | Inner Wd. | Wall Thick. | Material | Mounting Fasteners Included | Includes | 4 ft. | 6 ft. | 8 ft. | |
1 3/4" | 1 3/4" | 1 1/2" | 1 1/2" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
2" | 2" | 1 3/4" | 1 3/4" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
2 1/4" | 2 1/4" | 2" | 2" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
2 1/2" | 2 1/2" | 2 1/4" | 2 1/4" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t221-1633364935-p9@halfx_637689437393399206.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t226-1633364778-p9@halfx_637689436036631913.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t222-1633364808-p9@halfx_637689436107367591.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t219-1633364740-p9@halfx_637689435438153131.png?ver=imagenotfound)
Surface and corner brackets connect same-size rails.
Bracket Type | For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
Corner | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 4 3/4" | Zinc-Plated Steel | No | 00000000 | 00000 |
Crossover | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 2 1/4" | Zinc-Plated Steel | No | 00000000 | 0000 |
Straight | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 8" | Zinc-Plated Steel | No | 00000000 | 0000 |
Tee | 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 5 1/4" | Zinc-Plated Steel | No | 00000000 | 0000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t223-@halfx_637690162400932718.png?ver=imagenotfound)
Surface and corner brackets connect same-size rails.
For Rail Ht. | Lg. | Material | Mounting Fasteners Included | Each | |
1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 2" | Zinc-Plated Steel | No | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/493/4931t224-1633437380-p9@halfx_637690167965766816.png?ver=imagenotfound)
Mounting foot fits 1 3/4" to 2 1/2" square rails and has a flange to attach to surfaces such as floors, walls, and ceilings.
Mounting Holes | ||||||||
---|---|---|---|---|---|---|---|---|
Mounting Foot Type | For Rail Ht. | Lg. | Material | No. of | Dia. | Mounting Fasteners Included | Each | |
Fixed Height | 1 3/4", 2", 2 1/4", 2 1/2" | 6" | Galvanized Steel | 4 | 11/16" | No | 00000000 | 000000 |