Designed for indoor applications, these cords are often used to power appliances.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

Hardwire these cords to equipment.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Plug these connectors into hazardous location devices. Using a NAMUR signal, they operate at a low current and voltage, so they prevent the risk of sparks and ignition in volatile areas.

Visually confirm your connector is working properly. A green light means your connector has power, while yellow means it has signal.

Some of the smallest signal/power connectors we offer, these connectors fit in tight spaces and are often used in electronics.

Minimize signal loss between low-current devices with M8 connections.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

Also known as pico connectors, these connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Meet international standards IEC 309-1 and 309-2.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Change the M8 8-pin connection on your Schunk gripper to wire leads for hardwiring robots that don’t have an M8 8-pin connection.