Pin Bolts | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Material

Aluminum Bronze

Stainless Steel

Thread Size

Fastener Head Type

Domed on Both Sides

Flush Mount on Both Sides

Usable Length

Drive Style

Tamper-Resistant Hex

Tamper-Resistant Torx

Tamper-Resistant Torx Plus

Finish

Zinc Yellow-Chromate Plated

For Material Thickness

0.01" to 0.031"

0.02" to 0.062"

0.02" to 0.125"

0.02" to 0.197"

0.02" to 0.275"

0.03" to 0.312"

0.03" to 0.512"

0.031" to 0.062"

0.031" to 0.125"

0.031" to 0.187"

0.032" to 0.062"

0.032" to 0.125"

0.032" to 0.375"

0.039" to 0.118"

0.039" to 0.138"

0.039" to 0.156"

Head Diameter

Barrel Length

End Type

Threading

Partially Threaded

Threaded on One End

Rivet Type

Head Height

Barrel Diameter

Pin Type

RoHS

Compliant with Exemptions

REACH

DFARS Specialty Metals

Barrel Drive Style

Tamper-Resistant Torx

Export Control Classification Number (ECCN)

Rounded Head Style

Thread Length

How can we improve?

4,059 Products

Fastening and Joining

Hex Head Screws

Hex Head Screws

Used with nuts to create a stronger joint than flat and rounded screws

Rounded Head Screws

Rounded Head Screws

Sit just above the surface for a low-profile finish and hold tighter than flat head screws

Tapping Screws

Fasten a range of materials together without needing to tap the hole first

Flat Head Screws

Flat Head Screws

Fit in countersunk holes for a flush finish that won't snag on surrounding parts

Clevis Pins

Secure parts in place and lock with a cotter pin or retaining ring

Taper Pins

Fit snugly into tapered holes to secure, position, and align components

Single-End Studs

Single-End Studs

Use the unthreaded end as a pivot point, hinge, shaft, or locator pin

Binding Barrels

Binding Barrels

Create custom low-profile fasteners with binding barrel posts, caps, and screws

Rivets

Join materials together permanently, especially when too thin or fragile to fasten with screws

Rivet Tools

Install and remove blind, solid, hollow, and other types of rivets

Fabricating and Machining

Chisel Bits

Pair with powered hammers or needle scalers to chip material off of workpieces

Hammers

Strike nails and chisels to drive them; also use to shape surfaces

Material Handling

Scaffold Locking Pins

Scaffold Locking Pins

Fasten base plates, guardrail posts, and other components to scaffold frames

The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)