M14 Pins | McMaster-Carr

Filter by

System of Measurement

Thread Pitch

Pin Diameter

Diameter

Mount Type

Pin Type

Material

Mounting Flange Shape

Length

Fastener Head Type

Finish

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Thread Type

Metric

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Nose Diameter

Thread Length

Extended Nose Length

Passivation

Usable Length Reduction

Component

Barrel OD

Nose Material

15 Products

Thread-In Quick-Release Pin Receptacles

Use a screwdriver to install these receptacles in a threaded hole. Use them to secure quick-release pins when you can't drill a through hole. They're made of 18-8 stainless steel for a balance of strength and corrosion resistance, and passivated for added protection against corrosion and oxidation.

	Barrel OD, mm	Overall Lg., mm	Usable Lg. Reduction, mm	Thread Size	Material	Passivation		Each
Round Mounting Flange



	8	14	16	3	M14 × 2 mm	18-8 Stainless Steel	Passivated	94715A304	000000

Quarter-Turn Quick-Change Fixture Clamps

Install these clamps into fixture plates, machine subplates, and tombstones to quickly swap components in or out of your machining setup. They lock or unlock with the turn of a knob. Since they locate while they clamp, you can accurately position components with repeatability of ±0.1".

For accurate positioning, use at least two sets of clamps and cam receptacles. Install receptacles into a base plate and clamps into a fixture plate. Line up the two plates, insert the clamps into the receptacles, then turn the knobs to secure your fixture in place. If you need more holding capacity, use additional clamps and receptacles.

Cam Receptacles

Thread In

Thread In—Thread-in receptacles have a threaded body for installation in a tapped hole. You hold them in place with the included nut, so they’re good for thin base plates.

	For Fixture Plate Thk.
	Min.	Max.	For Clamp Shank Dia., mm	Dia.	Thk.	Thread Size	Material		Each
Thread In



		1/4"	3/8"	5	1"	5/8"	M14 × 1.5 mm	Nickel-Plated Steel	9952N123	000000

Sanitary Retractable Spring Plungers

With rounded edges and polished surfaces, these spring plungers are free of nooks and crannies where dirt, water, and bacteria could collect. The seal on the base keeps contaminants off the threads and is bright blue, so you can easily spot broken pieces that fall into your line. A tug of the knob manually retracts the nose so you can do everything from positioning containers on an assembly line to locking mixing blades in place. Spring plungers are FDA compliant for direct contact with food.

316 Stainless Steel Nose—Won't corrode from frequent washdowns with harsh cleaners and detergents.

Twist-to-Lock—Free up both hands to adjust your workpiece or switch out parts without the plunger springing back and getting in the way. Pull back the handle and twist to lock the nose in its retracted position.

	Spring Plungers													Replacement Seals
			Nose, mm		Nose Force, lbf		Body		Handle			Twist-to-Lock
	Thread Size	Thread Lg., mm	Extended Lg.	Dia.	Extended	Compressed	Material	Lg., mm	Material	Dia., mm	Seal Material		Each		Each
316 Stainless Steel Nose



		M14 x 1.5 mm	12	6	6	4.5	8.1	316 Stainless Steel	72	316 Stainless Steel	35	Buna-N	97158A130	0000000	97158A150	00000


		M14 x 1.5 mm	12	8	8	5	7.2	316 Stainless Steel	77	316 Stainless Steel	35	Buna-N	97158A140	000000	97158A150	0000

Go/No-Go Threaded Plug Gauges with Handle

Speed up thread tolerance checks—the handle on these gauges gives you a good grip to quickly thread and unthread go or no-go gauges. Use these gauges to make sure nuts, tapped holes, and other parts fall within tolerance. All are precisely manufactured to confirm thread fit. If the plug gauges wear down, you can insert new ones (not included) onto the taperlock handle.

A part is within tolerance if it’s easy to thread the go gauge into the part but difficult to thread the no-go gauge more than two turns.

Go/no-go gauges have both a go gauge on one end of the handle and a no-go gauge on the other to speed up tests. Go gauges check the minimum internal thread size. No-go gauges check the maximum internal thread size.

Class X Gauge

Double-Ended Taperlock

Handle

Accuracy Certificate Traceable to NIST—Gauges with an accuracy certificate traceable to NIST include verification from the manufacturer that their thread sizes are within tolerance. The certificate is also known as a certificate of compliance or a short-form certification.

Calibration Certificate Traceable to NIST—Gauges with a calibration certificate traceable to NIST were calibrated in a lab. The certificate, sometimes called a test report or long-form certificate, details the tested measurements.

For Metric Class 6H Thread Fit—These metric-threaded gauges are class 6H, which is comparable to the fit of those with Class 2B Unified Standard.

For Thread Fit—Thread fit designates the tightness or looseness of mating threads.

	Thread Type	Pitch Dia. Tolerance, mm	Hardness	Material	Features	For Thread Fit		Each
Go/No-Go Gauges



	M14 × 1.5 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	23585A143	0000000


	Go/No-Go Gauges with Accuracy Certificate Traceable to NIST



			M14 × 1 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	23585A225	000000


			M14 × 1.25 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	23585A224	000000
			M14 × 2 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	23585A223	000000


			Go/No-Go Gauges with Calibration Certificate Traceable to NIST



					M14 × 1 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	3206A213	000000


					M14 × 1.25 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	3206A212	000000
					M14 × 1.5 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	3206A132	000000
					M14 × 2 mm	Metric	-0.008 to 0.008	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	3206A211	000000

Go/No-Go Left-Hand Threaded Plug Gauges with Handle

A go and no-go gauge in one, these gauges check that left-hand threads fall within tolerance. Use them to confirm thread fit for nuts, tapped holes, and other parts. The taperlock handle speeds up tests, giving you a good grip to thread and unthread each gauge end. It also lets you swap out worn gauges for new ones (not included) on either end.

The go gauge checks the minimum internal thread size, and the no-go gauge checks the maximum. A part is within tolerance if it’s easy to thread the go gauge but difficult to thread the no-go gauge more than two turns.

Class X Gauge

Plug Gauges with Accuracy Certificate Traceable to NIST—Gauges with an accuracy certificate traceable to NIST include verification from the manufacturer that their thread sizes are within tolerance. The certificate is also known as a certificate of compliance or a short-form certification.

Plug Gauges with Calibration Certificate Traceable to NIST—Gauges with a calibration certificate traceable to NIST were calibrated in a lab. The certificate, sometimes called a test report or long-form certificate, details the tested measurements.

For Metric Class 6H Thread Fit—For metric threads, the higher the class number, the looser the fit. Class 6H is the metric standard and works for most applications.

For Thread Fit—Thread fit designates the tightness or looseness of mating threads.

	Thread Type	Pitch Dia. Tolerance	Hardness	Material	Features	For Thread Fit		Each
Plug Gauges with Accuracy Certificate Traceable to NIST



	M14 × 1.5 mm	Metric	-0.0003" to 0.0003"	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	7935N49	0000000


	Plug Gauges with Calibration Certificate Traceable to NIST



			M14 × 1.5 mm	Metric	-0.0003" to 0.0003"	Rockwell C70	Chrome-Plated Tool Steel	Double-Ended Taperlock Handle	Metric Class 6H	7938N49	000000