McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Loop-Grip Clevis Pins with Toggle

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Loop-Grip Clevis Pins with Toggle.
    For components you need to lock in place but also disconnect frequently, these pins have a toggle end and large loop handle. No need for a separate cotter pin, the toggle swivels so you can insert into a hole and then swivels back to secure. Fold down the handle to save space when installed.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia. Tolerance
    Min.
    Hardness
    Each
    Zinc-Plated Carbon Steel
     
    1/2" Diameter
    3 1/2"-0.003" to 0.001"Rockwell B90000000000000000
    5 1/2"-0.003" to 0.001"Rockwell B9000000000000000
     
    5/8" Diameter
    3 1/2"-0.003" to 0.001"Rockwell B9000000000000000
    5 1/2"-0.003" to 0.001"Rockwell B9000000000000000
     
    3/4" Diameter
    3 1/2"-0.003" to 0.001"Rockwell B9000000000000000
    6"-0.003" to 0.001"Rockwell B9000000000000000
     
    13/16" Diameter
    6 1/4"-0.005" to 0"Rockwell B7000000000000000
     
    7/8" Diameter
    3 1/2"-0.003" to 0.001"Rockwell B9000000000000000
    6"-0.003" to 0.001"Rockwell B9000000000000000
     
    1" Diameter
    3 1/2"-0.004" to 0.001"Rockwell B9000000000000000
    6"-0.004" to 0.001"Rockwell B9000000000000000
     
    1 1/4" Diameter
    7"-0.010" to 0"Rockwell B7000000000000000
     
    12 mm Diameter
    90 mm-0.110 mm to 0 mmRockwell B7000000000000000
     
    16 mm Diameter
    90 mm-0.110 mm to 0 mmRockwell B7000000000000000
     
    20 mm Diameter
    150 mm-0.130 mm to 0 mmRockwell B7000000000000000
     
    25 mm Diameter
    100 mm-0.130 mm to 0 mmRockwell B7000000000000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg.
    Dia.
    Tolerance
    Min.
    Hardness
    Each
    18-8 Stainless Steel
     
    1/2" Diameter
    3 1/2"-0.005" to 0"Not Rated00000000000000
    5 1/2"-0.005" to 0"Not Rated0000000000000
     
    5/8" Diameter
    3 1/2"-0.005" to 0"Not Rated0000000000000
    5 1/2"-0.005" to 0"Not Rated0000000000000
     
    3/4" Diameter
    3 1/2"-0.005" to 0"Not Rated0000000000000
    6"-0.005" to 0"Not Rated0000000000000
     

    Ring-Grip Clevis Pins with Toggle

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Ring-Grip Clevis Pins with Toggle.
    Attach a lanyard or tags to the split ring on these pins, and then lock them in place with the toggle. As you push the pin into a hole, the toggle swivels so you can insert and then swivels back to secure—no need for a separate cotter pin. The ring folds down out of the way to save space when installed.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia. Tolerance
    Min.
    Hardness
    Each
    Zinc-Plated Carbon Steel
     
    3/8" Diameter
    2 3/4"-0.003" to 0.001"Rockwell B90000000000000000
    4"-0.003" to 0.001"Rockwell B9000000000000000
     
    10 mm Diameter
    70 mm-0.090 mm to 0 mmRockwell B700000000000000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg.
    Dia.
    Tolerance
    Min.
    Hardness
    Each
    18-8 Stainless Steel
     
    3/8" Diameter
    2 3/4"-0.004" to 0"Not Rated00000000000000
    4"-0.004" to 0"Not Rated0000000000000
     

    Strong-Hold Clevis Pins with Toggle

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Strong-Hold Clevis Pins with Toggle.
    A spring holds these tighter than other toggle pins so they won’t slide or rattle around in the hole. No need for a separate cotter pin, the toggle swivels so you can insert the pin into a hole and then swivels back to lock. These have a flat, low-profile head to fit in tight spaces. They're less likely to get in the way than loop- or ring-grip pins but aren’t as easy to grab if you want to remove them frequently.
    Corrosion-Resistant Stainless Steel
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant pins, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals. Like 18-8 stainless steel, they're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable Lg.
    Dia. Tolerance
    Min.
    Hardness
    Lg.
    Each
    Highly Corrosion-Resistant 316 Stainless Steel
     
    1/4" Diameter
    5/16" to 3/8"-0.004" to 0.004"Not Rated1 1/4"000000000000000
    7/16" to 1/2"-0.004" to 0.004"Not Rated1 3/8"00000000000000
    9/16" to 5/8"-0.004" to 0.004"Not Rated1 1/2"00000000000000
    13/16" to 15/16"-0.004" to 0.004"Not Rated1 3/4"00000000000000
     

    Clevis Pins with Toggle

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Clevis Pins with Toggle.
    Push these pins into place and lock without the need for a separate cotter pin. The toggle swivels so you can insert the pin into a hole and then swivels back to secure. These have a flat, low-profile head to fit in tight spaces. They're less likely to get in the way than loop- or ring-grip pins but aren’t as easy to grab if you want to remove them frequently.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia.
    Tolerance
    Min.
    Hardness
    Each
    Zinc-Plated Carbon Steel
     
    1/2" Diameter
    3"-0.003" to 0"Rockwell B71000000000000000
    4"-0.003" to 0"Rockwell B7100000000000000
    5"-0.003" to 0"Rockwell B7100000000000000
     
    5/8" Diameter
    4"-0.003" to 0"Rockwell B7100000000000000
    5"-0.003" to 0"Rockwell B7100000000000000
    6"-0.003" to 0"Rockwell B7100000000000000
     

    Scaffold Locking Pins

    Image of Product. Front orientation. Scaffold Locking Pins. Toggle Pin.

    Toggle Pin

    Fasten coupling pins, base plates, guardrail posts, and other components to scaffold frames. They replace missing pins on your scaffold frame to help you comply with OSHA safety requirements. Made of galvanized steel, they resist rust and hold up to outdoor use.
    Toggle Pin—Toggle pins have a hinged arm that flips down against the frame to lock the pin in place. They’re also known as hinge pins.
    Cal/OSHA Compliant Title 8 Section 1646 and OSHA Compliant 29 CFR 1926.451—Pins meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Each
    Package
    Dia.
    Lg.
    Usable
    Lg.
    Material
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Toggle Pin
    3/8"3 7/8"2 3/4"Galvanized SteelCal/OSHA Compliant Title 8 Section 1646, OSHA Compliant 29 CFR 1926.45100000000000010000000000000000
     
    back to top