Slide these flexible vinyl caps on and they conform for a snug fit.

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

Made of FDA listed materials, these caps are suitable for food contact.

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Slide these flexible vinyl caps onto rectangular objects and they conform for a snug fit.

Guard the corners of fragile materials such as glass and mirrors.

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Similar to a shower cap, these caps have an elastic band that allows them to stretch and cover a variety of shapes in a range of sizes.

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Conceal and protect the tops of socket head or button head screws.

Pin holes on the side of these caps let you insert an installation tool for increased leverage when tightening, making them difficult to remove.

A thin head means these caps sit nearly flush with your surface for a clean look.

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Flexible ridges or straps hold these plugs in place.

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Push these plugs into an opening and friction holds them in place.