These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

Made of EPDM rubber, these gaskets also resist salt water.

Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.

Also known as Gore GR.

Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

Instead of bolt holes, these gaskets have tines that easily fit around flange bolts to ensure they’re properly aligned with pipe openings. The tine design also means you won’t have to retorque the flange for alignment, saving time.

Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.

In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

These pure PTFE gaskets have a slippery surface that prevents sticking.

Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.

Also resistant to salt water.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

Create a tight seal on grooved-end pipe fittings that are exposed to oil. These gaskets are Buna-N, so they won't break down from oil.