How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Conduit
More
Low-Pressure Stainless Steel Threaded Pipe Fittings
Use these fittings in a low-pressure pipe line.
Fittings that meet ANSI/MSS SP-114 adhere to high-quality standards for heat treating, material thickness, and marking. 304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.
NPTF (Dryseal) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class:
NPSL: 150 - Fabrication:
NPSL: Heat Treated - Specifications Met:
NPSL: ANSI/MSS SP-114, ASTM A351
BSPP: DIN 431 - Pipe Nipples and Pipe:
NPSL: Use Schedule 40 stainless steel - Flanges:
NPSL: Use Class 150 stainless steel
Extreme-Pressure Stainless Steel Threaded Pipe Fittings
With the strength to handle extreme pressures, these fittings can be used to connect equipment in hydraulic fluid lines.
303 stainless steel fittings have very good corrosion resistance.
Locknuts have a gasket, which creates a tight seal without the need for PTFE tape; screw one onto the male end of a fitting for extra holding power.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Water
- Temperature Range: -300° to 500° F
303 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
Pipe Size | Dash Size | Hex Wd. | Lg. | Gasket Material | Max. Pressure | Each | |
NPT Female | |||||||
1 1/4 | 20 | 2" | 25/64" | PTFE Plastic | 5,000 psi @ 72° F | 0000000 | 0000000 |
Low-Pressure Iron and Steel Threaded Pipe Fittings
Use these fittings for low-pressure applications in noncorrosive environments.
Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration. Some meet DIN 431, which is an international standard for pipe fitting locknut dimensions.
NPTF (Dryseal) threads, NPSC (National Pipe Straight Coupling) threads, and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class:
NPT: 125
NPSL: 150 - Specifications Met:
NPT: ASME B1.20.1, ASME B16.4
NPSL: ASME B16.14
BSPP: DIN 431 - Pipe Nipples and Pipe:
NPT, NPSL: Use Schedule 40 steel
Low-Pressure Galvanized Iron and Steel Threaded Pipe Fittings
The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.
Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.
NPSC (National Pipe Straight Coupling) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Steam, Oil, Water, Natural Gas
- Pressure Class: 150
- Specifications Met: ASME B16.14
- Pipe Nipples and Pipe: Use Schedule 40 galvanized steel
- Flanges: Use Class 150 galvanized steel
Pipe Size | Material | Each | |
NPSL Female | |||
---|---|---|---|
1 1/4 | Galvanized Iron | 00000000 | 000000 |
Extreme-Pressure Steel Threaded Pipe Fittings
The strongest steel fittings we offer, these can withstand extreme-pressure applications.
Galvanized and zinc-plated steel fittings have better corrosion resistance than plain steel fittings. PTFE-coated steel fittings have better corrosion resistance than galvanized and zinc-plated steel fittings.
Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Temperature Range: -100° to 500° F
- Pipe Nipples and Pipe: Use Schedule XXH steel
- Flanges: Use Class 1500 steel
Pipe Size | Dash Size | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT Female | ||||||
---|---|---|---|---|---|---|
1 1/4 | 20 | 5,000 psi @ 72° F | 5,000 psi @ 500° F | Galvanized Steel | 0000000 | 000000 |
Low-Pressure Brass and Bronze Threaded Pipe Fittings
Use these fittings in low-pressure flow applications. They have good corrosion resistance. Fittings rated for use with drinking water meet NSF/ANSI 61 safety standards.
Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration. Locknuts that meet DIN 431 adhere to international standards for locknut dimensions.
NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Pressure Class: See table
- Specifications Met: See table
- Pipe Nipples and Pipe: See table
- Flanges: See table
For Pipe | For Flange | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Max. Pressure | Pressure Class | Material | Schedule | Material | Class | Material | For Use With | Specifications Met | Each | |
NPSL Female | |||||||||||
1 1/4 | 200 psi @ 72° F | 125 | Brass | 40 | Brass | 150 | Brass | Air, Drinking Water, Natural Gas, Oil | ASME B1.20.1, ASME B16.15, ASTM A584, NSF/ANSI 61 | 00000000 | 000000 |
BSPP Female | |||||||||||
1 1/4 | Not Rated | __ | Brass | __ | Brass | __ | Brass | Air, Natural Gas, Oil | DIN 431 | 0000000 | 00000 |
Low-Pressure Aluminum Threaded Pipe Fittings
In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications. To prevent cracking, do not tighten more than a 1/4-turn past hand tight.
Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.
NPTF (Dryseal) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Oil, Water
- Pressure Class: 150
- Pipe Nipples and Pipe: Use Schedule 40 aluminum
- Flanges: Use Class 125 aluminum
Pipe Size | Max. Pressure | Each | |
NPSL Female | |||
---|---|---|---|
1 1/4 | 150 psi @ 72° F | 000000000 | 000000 |
Locknuts for Metal Conduit Fittings
316 Stainless
Steel, and Aluminum
Steel with
Serrated Facing
Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.
Zinc-plated steel, 316 stainless steel, and aluminum locknuts are compatible with NPSL and NPSM threads.
Locknuts with a PVC molded gasket create a seal for moisture protection.
Locknuts with serrated facing grip the material surface for more stability, compared to locknuts with smooth facing.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||
---|---|---|---|---|
NPSM Threads | ||||
1 1/4 | UL Listed, CSA Certified | 10 | 00000000 | 00000 |
Zinc-Plated Steel with PVC Molded Gasket | ||||
NPSM Threads | ||||
1 1/4 | UL Listed, CSA Certified | 2 | 00000000 | 0000 |
Each | ||||
Zinc-Plated Steel with Serrated Facing | ||||
NPSM Threads | ||||
1 1/4 | UL Listed, CSA Certified | __ | 00000000 | 0000 |
316 Stainless Steel | ||||
NPSL | ||||
1 1/4 | UL Listed, C-UL Listed | __ | 00000000 | 00000 |
Aluminum | ||||
NPSM Threads | ||||
1 1/4 | __ | __ | 00000000 | 0000 |