3/4 Pipe Size Pipe Locknuts

Filter by

System of Measurement

Pipe Size

Material

Fitting Type

Thread Type

Pipe Material

For Use With

Hex Width

For Conduit Material

Flange Material

Length

Pipe Schedule

Finish

Color

REACH Compliance

Maximum Pressure @ Temperature

Specifications Met

RoHS Compliance

DFARS Compliance

Pressure Class

Certification

For Flange Class

Maximum Steam Pressure @ Temperature

Forward

How can we improve?

21 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

About Conduit

Low-Pressure Stainless Steel Threaded Pipe Fittings

Use these fittings in a low-pressure pipe line.

Fittings that meet ANSI/MSS SP-114 adhere to high-quality standards for heat treating, material thickness, and marking. 304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration. Locknuts that meet DIN 431 comply with international standards for pipe fitting locknut dimensions.

NPTF (Dryseal) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Natural Gas, Oil, Steam, Water
Pressure Class:
NPSL: 150
Fabrication:
NPSL: Heat Treated
Specifications Met:
NPSL: ANSI/MSS SP-114, ASTM A351
BSPP: DIN 431
Pipe Nipples and Pipe:
NPSL: Use Schedule 40 stainless steel
Flanges:
NPSL: Use Class 150 stainless steel

			304 Stainless Steel		316 Stainless Steel
Pipe Size	Max. Pressure	Max. Steam Pressure		Each		Each
NPSL Female
3/4	300 psi @ 72° F	150 psi @ 350° F	00000000	00000	00000000	00000
BSPP Female
3/4	Not Rated	Not Rated	00000000	0000	000000	00

Extreme-Pressure Stainless Steel Threaded Pipe Fittings

With the strength to handle extreme pressures, these fittings can be used to connect equipment in hydraulic fluid lines.

303 stainless steel fittings have very good corrosion resistance.

Locknuts have a gasket, which creates a tight seal without the need for PTFE tape; screw one onto the male end of a fitting for extra holding power.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Water
Temperature Range: -300° to 500° F

						303 Stainless Steel
Pipe Size	Dash Size	Hex Wd.	Lg.	Gasket Material	Max. Pressure		Each
NPT Female
3/4	12	1 5/16"	19/64"	PTFE Plastic	5,000 psi @ 72° F	0000000	0000000

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration. Some meet DIN 431, which is an international standard for pipe fitting locknut dimensions.

NPTF (Dryseal) threads, NPSC (National Pipe Straight Coupling) threads, and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Natural Gas, Oil, Steam, Water
Pressure Class:
NPT: 125
NPSL: 150
Specifications Met:
NPT: ASME B1.20.1, ASME B16.4
NPSL: ASME B16.14
BSPP: DIN 431
Pipe Nipples and Pipe:
NPT, NPSL: Use Schedule 40 steel

NPSL Female
Pipe Size	Material		Each
3/4	Iron	000000000	00000
BSPP Female
3/4	Steel	0000000	0000

Low-Pressure Galvanized Iron and Steel Threaded Pipe Fittings

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.

NPSC (National Pipe Straight Coupling) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

Locknut

For Use With: Air, Steam, Oil, Water, Natural Gas
Pressure Class: 150
Specifications Met: ASME B16.14
Pipe Nipples and Pipe: Use Schedule 40 galvanized steel
Flanges: Use Class 150 galvanized steel

NPSL Female
Pipe Size	Material		Each
3/4	Galvanized Iron	00000000	00000

Extreme-Pressure Steel Threaded Pipe Fittings

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Galvanized and zinc-plated steel fittings have better corrosion resistance than plain steel fittings. PTFE-coated steel fittings have better corrosion resistance than galvanized and zinc-plated steel fittings.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
Temperature Range: -100° to 500° F
Pipe Nipples and Pipe: Use Schedule XXH steel
Flanges: Use Class 1500 steel

NPT Female
Pipe Size	Dash Size	Max. Pressure	Max. Steam Pressure	Material		Each
3/4	12	5,000 psi @ 72° F	5,000 psi @ 500° F	Galvanized Steel	0000000	000000

Low-Pressure Brass and Bronze Threaded Pipe Fittings

Use these fittings in low-pressure flow applications. They have good corrosion resistance. Fittings rated for use with drinking water meet NSF/ANSI 61 safety standards.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration. Locknuts that meet DIN 431 adhere to international standards for locknut dimensions.

NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: See table
Pressure Class: See table
Specifications Met: See table
Pipe Nipples and Pipe: See table
Flanges: See table

				For Pipe		For Flange
Pipe Size	Max. Pressure	Pressure Class	Material	Schedule	Material	Class	Material	For Use With	Specifications Met		Each
NPSL Female
3/4	200 psi @ 72° F	125	Brass	40	Brass	150	Brass	Air, Drinking Water, Natural Gas, Oil	ASME B1.20.1, ASME B16.15, ASTM A584, NSF/ANSI 61	00000000	00000
BSPP Female
3/4	Not Rated	__	Brass	__	Brass	__	Brass	Air, Natural Gas, Oil	DIN 431	0000000	0000

Low-Pressure Plated Brass Threaded Pipe Fittings

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Chrome-plated brass fittings are shinier and withstand corrosion better than nickel-plated brass fittings.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Natural Gas, Oil, Steam, Water
Pressure Class: 125
Specifications Met: ASTM B456
Pipe Nipples and Pipe: Use Schedule 40 brass

NPT Female
Pipe Size	Max. Pressure	Max. Steam Pressure		Each
Chrome-Plated Brass
3/4	200 psi @ 72° F	125 psi @ 400° F	00000000	000000

High-Pressure Brass Threaded Pipe Fittings

These fittings have the strength to handle high-pressure applications. They are brass for good corrosion resistance.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Natural Gas, Oil, Water

NPT Female
Pipe Size	Max. Pressure		Each
3/4	1,000 psi @ 72° F	000000000	00000

Low-Pressure Aluminum Threaded Pipe Fittings

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications. To prevent cracking, do not tighten more than a 1/4-turn past hand tight.

Locknuts thread onto the male end of a fitting to provide extra holding power so the fitting won’t loosen from vibration.

NPTF (Dryseal) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.

Locknuts

For Use With: Air, Oil, Water
Pressure Class: 150
Pipe Nipples and Pipe: Use Schedule 40 aluminum
Flanges: Use Class 125 aluminum

NPSL Female
Pipe Size	Max. Pressure		Each
3/4	150 psi @ 72° F	000000000	000000

Locknuts for Metal Conduit Fittings

Zinc-Plated Steel,
316 Stainless
Steel, and Aluminum

Zinc-Plated Steel with PVC Molded Gasket

Zinc-Plated
Steel with
Serrated Facing

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Zinc-plated steel, 316 stainless steel, and aluminum locknuts are compatible with NPSL and NPSM threads.

Locknuts with a PVC molded gasket create a seal for moisture protection.

Locknuts with serrated facing grip the material surface for more stability, compared to locknuts with smooth facing.

For technical drawings and 3-D models, click on a part number.

Zinc-Plated Steel
Pipe Size	Specifications Met	Pkg. Qty.		Pkg.
NPSM Threads
3/4	UL Listed, CSA Certified	10	00000000	00000
Zinc-Plated Steel with PVC Molded Gasket
NPSM Threads
3/4	UL Listed, CSA Certified	2	00000000	0000
				Each
Zinc-Plated Steel with Serrated Facing
NPSM Threads
3/4	UL Listed, CSA Certified	__	00000000	0000
316 Stainless Steel
NPSL
3/4	UL Listed, C-UL Listed	__	00000000	00000
Aluminum
NPSM Threads
3/4	__	__	00000000	0000

Locknuts for Plastic Conduit Fittings

Nylon

PVC

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure. PVC locknuts are compatible with PVC Schedule 40 and Schedule 80 conduit with NPT and NPSM threads.

For technical drawings and 3-D models, click on a part number.

		Black		Gray
Pipe Size	Specifications Met		Each		Each
Nylon
NPT Threads
3/4	__	00000000	00000	00000000	00000
PVC
NPSM Threads
3/4	UL Recognized Component	000000	00	0000000	0000