Filter by
System of Measurement
Fastener Head Type
For Rivet Head Type
For Material Thickness
Hole Size
Export Control Classification Number (ECCN)
Nose Length
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Nose Diameter
DFARS Specialty Metals
Relative Domed Head Size
Removal Tools for Blind and Solid Rivets
 |  |
Attach this tool to your drill to remove all styles of aluminum, steel, and plastic domed head rivets. Collets fit over the head of your rivet to keep the drill bit centered and prevent it from slipping and damaging surrounding material. The tool also allows you to control the depth of your drilling.
For Rivet Dia. | For Rivet Material | Dia. | Lg. | Material | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|
| 3/32", 1/8", 5/32", 3/16" | Aluminum, Plastic, Steel | 7/8" | 5" | Steel | Four 1" Lg. Collets (3/32", 1/8", 5/32", and 3/16") Four 2 1/8" Lg. Drill Bits (3/32", 1/8", 5/32", and 3/16") | 90112A600 | 000000 |
Plastic Blind Rivets
Nylon Mandrel
 |  |
Rivet with Nylon Mandrel Installed | Nylon Mandrel |
Nylon mandrel absorbs moisture which can affect dimensions and other properties.
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength | Temp. Range, ° F | Material | Color | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.157" Diameter | |||||||||||||||
| 0.02" to 0.197" | 0.315" | 0.16" to 0.164" | 20 Ga. | 0.362" | 0.055" | 40 | Not Rated | -25 to 175 | Nylon | Off-White | 50 | 90219A042 | 000000 | ||
| 0.197" to 0.354" | 0.472" | 0.16" to 0.164" | 20 Ga. | 0.362" | 0.055" | 40 | Not Rated | -25 to 175 | Nylon | Off-White | 50 | 90219A043 | 00000 | ||
0.197" Diameter | |||||||||||||||
| 0.02" to 0.197" | 0.315" | 0.2" to 0.204" | 7 Ga. | 0.445" | 0.071" | 60 | Not Rated | -25 to 175 | Nylon | Off-White | 50 | 90219A044 | 00000 | ||
| 0.197" to 0.354" | 0.472" | 0.2" to 0.204" | 7 Ga. | 0.445" | 0.071" | 60 | Not Rated | -25 to 175 | Nylon | Off-White | 50 | 90219A045 | 00000 | ||
0.236" Diameter | |||||||||||||||
| 0.02" to 0.197" | 0.315" | 0.241" to 0.245" | C | 0.524" | 0.071" | 100 | Not Rated | -25 to 175 | Nylon | Off-White | 50 | 90219A046 | 00000 | ||
| 0.197" to 0.354" | 0.472" | 0.241" to 0.245" | C | 0.524" | 0.071" | 100 | Not Rated | -25 to 175 | Nylon | Off-White | 50 | 90219A047 | 00000 | ||
 |
For Rivet Dia. | Lg. | Each | |||
|---|---|---|---|---|---|
| 0.157", 0.195", 0.197", 0.236", 0.246" | 6 1/2" | 97540A210 | 000000 | ||
Acetal Mandrel
 |  |
Rivet with Acetal Mandrel Installed | Acetal Mandrel |
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Temp. Range, ° F | Material | Color | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.195" Diameter | |||||||||||||||
| 0.059" to 0.177" | 0.61" | 0.197" to 0.217" | 13/64" | 0.472" | 0.13" | 60 | 120 | -25 to 175 | Nylon | Black | 20 | 90219A315 | 00000 | ||
| 0.118" to 0.177" | 0.669" | 0.197" to 0.217" | 13/64" | 0.472" | 0.071" | 60 | 120 | -25 to 175 | Nylon | Black | 20 | 90219A320 | 0000 | ||
| 0.118" to 0.236" | 0.669" | 0.197" to 0.217" | 13/64" | 0.472" | 0.071" | 60 | 120 | -25 to 175 | Nylon | Black | 20 | 90219A325 | 0000 | ||
| 0.236" to 0.394" | 0.866" | 0.197" to 0.217" | 13/64" | 0.472" | 0.071" | 60 | 120 | -25 to 175 | Nylon | Black | 20 | 90219A330 | 0000 | ||
0.246" Diameter | |||||||||||||||
| 0.157" to 0.394" | 0.984" | 0.25" to 0.27" | 1/4", E | 0.669" | 0.098" | 120 | 190 | -25 to 175 | Nylon | Black | 20 | 90219A340 | 0000 | ||
|
For Rivet Dia. | Lg. | Each | |||
|---|---|---|---|---|---|
| 0.157", 0.195", 0.197", 0.236", 0.246" | 6 1/2" | 97540A210 | 000000 | ||
Aluminum Domed Head Sealing Blind Rivets with Plastic Seal
 |
Installed |
Plastic bonded to the underside of the head creates a stronger seal than metal alone. These rivets are lightweight, nonmagnetic, and have good corrosion resistance. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
Aluminum Mandrel
 |  |
For Material Thickness—The combined thickness of material must fall within the rivet's material thickness range.
Shear Strength—Shear strength is the amount of force it takes to break a rivet from the side.
Tensile Strength—Tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
For Material Thk. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbf | Tensile Strength, lbf | Temp. Range, ° F | Material | Sealant Material | Specs. Met | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter | ||||||||||||||||
| 0.063" to 0.125" | 0.36" | 0.129" to 0.133" | 30 Ga. | 0.25" | 0.04" | 100 | 110 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A100 | 00000 | ||
| 0.126" to 0.187" | 0.422" | 0.129" to 0.133" | 30 Ga. | 0.25" | 0.04" | 100 | 110 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A150 | 00000 | ||
| 0.188" to 0.25" | 0.485" | 0.129" to 0.133" | 30 Ga. | 0.25" | 0.04" | 100 | 110 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A200 | 00000 | ||
3/16" Diameter | ||||||||||||||||
| 0.188" to 0.25" | 0.531" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 210 | 250 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A400 | 00000 | ||
| 0.251" to 0.375" | 0.656" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 210 | 250 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A450 | 00000 | ||
| 0.376" to 0.5" | 0.781" | 0.192" to 0.196" | 11 Ga. | 0.375" | 0.06" | 210 | 250 | -60 to 250 | 1100 Aluminum | PVC | IFI-126 | 10 | 97721A500 | 00000 | ||
Tools for Plastic Blind Rivets
|
Perfectly set all sizes of plastic rivets in a single stroke without removing the nosepiece.
Nose | ||||||||
|---|---|---|---|---|---|---|---|---|
For Blind Rivet Type | For Rivet Dia. | For Rivet Material | Dia. | Lg. | Lg. | Each | ||
| Standard | 0.157", 0.195", 0.197", 0.236", 0.246" | Plastic | 7/8" | 2 1/2" | 6 1/2" | 97540A210 | 000000 | |
