We will reply to your message within an hour.
More
Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.
This wire meets stringent military specifications for material quality.
Keep spools of wire in multiple colors on hand.
Maintain a supply of Mil. Spec. wire in multiple colors.
More flexible than standard wire, this wire is often used for internal appliance wiring and machine tools. Also known as MTW wire.
Run power over rough surfaces—this wire has thick insulation that stands up to wear and tear.
Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.
The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.
Even at 480° F—hotter than some industrial ovens—this wire’s insulation won’t melt.
Rated to 50 volts AC/DC, this wire is often used in small electronics and robotics. It withstands temperatures of 390° F and greater.
With a slim PFA plastic insulation, this wire has the same heat resistance as standard high-temperature wire but its diameter is one-third the size for use in tight spaces.
Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.
Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces.
The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration applications.
When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.
Install this copper wire in conduit and cable trays throughout commercial and industrial buildings. It's also known as branch circuit wire.
Connect batteries in vehicles and generators.
Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.
Keep spools of vehicle wire in multiple colors on hand.
Often found in older vehicles, this fusible link wire protects a circuit in applications where you can’t use a standard fuse.
Connect batteries in generators, forklifts, and other vehicles in corrosive environments. Also known as marine wire, this copper wire is tin plated to resist corrosion from salt water, battery acid, and oil.
Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.
The thin strands in this wire have better fatigue resistance under repeated flexing than the strands in standard continuous-flex wire, so it will last longer.
The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions.
Also known as photovoltaic (PV) wire, this wire won’t deteriorate from UV light when used outdoors. It’s often used in solar panels.
Also known as magnet wire, this wire is commonly used in motors, transformers, relays, and other high-speed winding applications.
This wire wraps around a post terminal on a circuit board to make an electrical connection, eliminating the need for soldering.
Assortments include wire in multiple lengths and colors.
Make connections in circuit boards with these short lengths of terminated wire.
Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.
Mend or extend aluminum wire often found in older buildings.
Use this general purpose cable to supply power to equipment.
This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn.
Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.
For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.
A thick rubber insulation resists cuts and abrasion, so this cable can be pulled over rough surfaces without damaging the wires inside.
Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces.
The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.
Weather-resistant insulation makes this cable suitable for outdoor use and direct burial without conduit.
Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.
Also known as zip cord, this cable is often used in lamps, heat guns, and other small appliances.
Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.
The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission
Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.
Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.
In addition to handling continuous movement, this cable withstands twisting up to 450° without degrading data or signal transmission. It's often used in welding robots and rotary tables.
With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.
For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.
Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.
This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it in low-current circuits such as intercoms and security systems.
Connect low-current circuits such as intercoms and security systems to a building's electrical system in single-level facilities.
The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.
Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.
This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.
Also known as fixture whips, this cable has locknuts and fittings attached to the protective metal armor to secure it to a knockout. It's often used to connect light fixtures.
Hook up thermostats, air-conditioning units, and other low-voltage equipment.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use in critical circuits such as fire alarms and smoke detectors.
This cable is approved for use in vertical shafts and large facilities with mulitple levels for critical circuits such as fire alarms and smoke detectors.
Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable.
Send signal and data to operate, measure, or regulate automated equipment such as conveyors and CNC machines.
This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.
Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.
This cable is used in variable-frequency drive motors. It has shielding to block signal interference caused by voltage fluctuations and current spikes.
Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.
Keep water from damaging wires—this cable has a layer of absorbent material that traps moisture before it reaches the internal wires. It sends signal and data to operate, measure, or regulate automated equipment.
Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.
Made of thin, flattened wires, this flexible cable can be routed in tight spaces, such as inside a laptop.
Often used to send signal and data to order pickers and cranes, this cable withstands continuous motion applications without degrading data or signal transmission.
Use this cable for complex and high-speed data and signal transmission.
This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.
Connect devices such as sensors, programmable logic controllers, and actuators to an automated network.
Send data between computers, printers, servers, and switches.
Often used in automated applications that require continuous motion, this cable sends data between computers, servers, and switches without degrading signal transmission.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.
From mines and factories to robotics, this rugged Ethernet cable sends data between sensors and switches in the grimiest places.
Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. It has an oil-resistant insulation to protect wires as the cable moves from duct to equipment or machinery.
Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.
Hook up speakers, intercoms, and other low-current devices to a building's communication wiring.
Send data between data centers and workstations in fiber-optic networks.
Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.
This wire bounces back after bending. It’s often used to construct springs and wire rope.
Coated with PVC for corrosion resistance, this carbon steel wire will stand up to outdoor use.
This wire rope provides a good balance of abrasion resistance and flexibility.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.
This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.
This braided wire has a stiff construction for use as bracing and guy wires.
More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.
A thimble on the inside of the loop protects the wire rope from fraying.
A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.
Made to meet stringent military standards, the fittings on these lanyards meet MS 20668.
Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.
The swivel fork allows the lanyard to rotate freely.
The swivel fork ends allow the lanyard to rotate freely.
Often used to tie items down, this rope is made of polyester, which resists stretching. The braided construction and hollow core make it easier to splice than other rope, so you can add a fitting or connect rope together.
Made from nylon, this rope compensates for sudden force, such as in towing applications and dock lines. A polyurethane coating gives this rope wear resistance for high-friction applications. It’s braided with a hollow core, so it’s easier to splice than other rope when adding a fitting or connecting rope together.
Made from a blend of high-performance polyester and polyethylene with a polyurethane coating, this rope has the greatest wear resistance of any rope we offer.
For more control over your load, this rope is a high-performance polyester also known as Vectran, which has excellent resistance to stretch and slip.
Also known as Dyneema and comparable to Spectra, this rope is made of high-performance polyethylene that remains strong even when wet.
Made of a high-performance aramid, also known as Technora, this rope keeps its strength in high heat and resists chemicals and corrosion. The braided construction and hollow core make it easier to splice than other rope, so you can add a fitting or connect rope together.
Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.
This sleeving withstands temperatures over 1000°F, such as in refineries.
Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.
Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.
Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
These ties have a loop on each end that can be twisted around each other for a secure closure.