We will reply to your message within an hour.
More
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
If you’re tight on storage space, this hose compresses down to a small size.
Let go of this hose and it will spring back out of your way.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
The neoprene coating on this hose holds up under high heat.
Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.
The smooth interior prevents dust from getting trapped and building up inside the hose.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
This white hose makes dirt and other contaminants easy to spot.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Bend this hose in any direction and it will hold its shape without support.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
Hose has a plastic spiral that acts as a wear strip to protect against damage.
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
The neoprene coating on this hose withstands continuous motion without weakening.
Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
Hose meets UL 94 V-2 for flame retardance.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.
Position this hose in any direction and it will hold its shape.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Super thin and lightweight, this hose is economical and rolls up for easy disposal.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
Step on or drive over this hose without causing damage.
Run water, mist, oil, and chemicals such as citric and acetic acid through this hose.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
Transfer material from sifters, feeders, and strainers to other parts of your sanitary line with these hose lengths and fittings.
A spiral seam gives this duct greater strength and rigidity than standard duct.
Made of PVC plastic to withstand acids, alkalies, salts, and other corrosive vapors and fumes.
Evenly distribute air from fans and blowers throughout large spaces.
Bolt flanges to equipment to start a run of duct.