An FEP liner gives this tubing better chemical resistance than any of our other soft tubing. It also provides a smooth interior for unrestricted flow.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

The corrugated design allows this tubing to extend and compress just like an accordion.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.

This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.

Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.

Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.

Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.

Let go of this hose and it will spring back out of your way.

The smooth interior prevents dust from getting trapped and building up inside the hose.

This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

Hose has a plastic spiral that acts as a wear strip to protect against damage.

Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.

A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Hose meets UL 94 V-2 for flame retardance.

The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.

Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.

Super thin and lightweight, this hose is economical and rolls up for easy disposal.

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.

An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.

Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.

The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.

Run water, mist, oil, and chemicals such as citric and acetic acid through this hose.

A small bend radius lets this hose twist and turn to fit in cramped spaces.

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.

Also known as riser tubes, these connect shut-off valves to sink faucets and toilet tanks.