Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Bonded to the stud is an acrylic adhesive that adds friction to resist loosening from vibration. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery. They mount into a threaded hole.

Knobs have left-hand threads; they're used in applications where counterclockwise motion can loosen common right-hand threads. Mount them into a threaded hole to position, tighten, and hold fixtures, equipment, and machinery.

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud.

Position, tighten, and hold fixtures, equipment, and machinery near food processing lines without the risk of contaminating the food. Install these knobs on a threaded stud.

Identify equipment controls and components at a glance by their color. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery.

Like locknuts, these knobs have a nylon insert that grips threads to resist loosening. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery.

To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Use these knobs to display important messages. To build a custom knob or thumb screw, pair one of these knobs with a socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Install these traditional, easy-to-grip ball knobs on a threaded stud. They're good for control levers and push-pull rods.

Expose these easy-to-grip ball knobs to light and they will glow green in the dark. Use them on control levers, push-pull rods, and emergency release handles. They mount on a threaded stud.

Control devices with round or D-shaped shafts and view settings at a glance with a pointer.

For monitoring the number of shaft turns on instrumentation, these knobs have easy-to-read scales or digits for quick and accurate readings. Use them on devices with round shafts.

Mount these knobs into a threaded hole. Turn the knob to move the stud 0.005" per graduation and make precise adjustments.

Often used on pallet and lift trucks, these knobs attach to steering wheels for one-hand operation.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

A soft textured surface provides a comfortable grip for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Use these handles for applications involving frequent positioning, tightening, and holding adjustments near food processing lines without the risk of contaminating the food. These handles are also known as clamping handles.

Use these handles as grips on hand wheels and cranks to operate machinery.

An easy-to-grip ball knob makes these handles a good replacement for gear levers. Use them to operate machinery.

Also known as quill-feed handles, these handles engage and disengage with a flick of the wrist to speed machining operations—especially when drilling deep holes.

Use these handles on cans, hoses, ladders, and other objects that weigh up to 30 lbs.

With adhesive at both ends, these plastic strips stick to boxes, bags, and other objects to create a carrying handle.

Create custom threads to secure these handles to the front of your surface from the backside. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Open and close a variety of doors and drawers on machines and equipment next to food processing lines while reducing the risk of contaminating the food. Thread screws through holes from the back of your surface into the handles to install them.

Designed to meet DIN EN 61340-5-1, these handles reduce static electricity that can damage electronic equipment. Fasten them directly to the front of your surface to open and close a variety of doors and drawers.

Cut the grip to the length you need before mounting. Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. They provide a stronger connection than those attached with screws or nuts.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they’re flush with the mounting surface.

Tap custom threads or drill a hole in the side of the hub to secure with a set screw. The spoked design allows a better grip around the rim than solid hand wheels to manually adjust valves, presses, and machine components.

Use these cables for high-precision motion control. Tighten the locknut to secure your setting in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance.

Use these crank handles for applications that involve frequent machinery adjustments. They provide leverage to maximize force for turning and tightening.

Replace broken or worn pull cords on machinery and tools, including those on lawn mowers.

These metric thumb screws have a knurled head for a slip-resistant controlled adjustment.

These metric thumb screws have a large head that allows you to grip them with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Tighten these thumb screws by hand or with a hex key for more torque.

Stronger than standard nylon, these thumb screws are chemical resistant, nonconductive, and lightweight. They have a raised head that makes them easy to grip.

These nylon thumb screws are chemical resistant, nonconductive, and lightweight.

Retract the nose by pulling the knob.

Two holes in the plate allow these plungers to be mounted to a flat surface.

With a finger-grip knob, these latches fit where latches with handles won't.