Plastic Restoration Kits

Filter by

For Use On

Container Type

Color

Reaches Full Strength

Maximum Temperature

Begins to Harden

Material

Process After Hardening

Consistency

Component

For Use With

Minimum Temperature

Welding Process

For Use Outdoors

Manufacturer

Clarity

REACH

Input Frequency

Formulation

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Container Size

Manufacturer Model Number

Environment

90 Products

Water-Resistant Surface Fillers


Epoxy Jar	Epoxy Can	Epoxy Can, Jar

Epoxy Tube	Epoxy Jar, Bottle	Epoxy Stick

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty—Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.

		Container													Temp. Range, ° F
	Mfr. Model No.	Size, fl. oz.	Net Wt., oz.	Type	Lg.	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	Dia.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Loctite® Fixmaster Underwater Repair Epoxy



		EA 9490	—	4	Stick	8"	15	60 min.	Putty	Yes	—	16 in² @ 1/4"	1/4"	1"	Yes	Not Rated	300	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Fiberglass, Wood	0000000	000000


		Epoxy Surface Fillers



				—	2	—	Tube	—	5	60 min.	Paste	Yes	1:1	12 in² @ 1/4"	1/2"	—	Yes	Not Rated	200	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	0000000	00000


				—	2	—	Jar, Bottle	—	20	24 hr.	Paste	Yes	5:1	8 1/2 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	185	White	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	0000000	00000
				—	2	—	Jar, Bottle	—	20	24 hr.	Paste	Yes	5:1	8 1/2 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	250	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	0000000	00000
				—	12	—	Jar	—	30	24 hr.	Paste	Yes	1:1	85 in² @ 1/4"	1"	—	Yes	50	210	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	0000000	00000
				—	14	—	Can, Jar	—	20	24 hr.	Paste	Yes	5:1	62 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	185	White	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	0000000	00000
				—	14	—	Can, Jar	—	20	24 hr.	Paste	Yes	5:1	62 in² @ 1/4"	1 1/2"	—	Yes	Not Rated	250	Gray	Machine, Drill, Sand, Saw, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood	0000000	00000
				—	24	—	Can	—	30	24 hr.	Paste	Yes	1:1	170 in² @ 1/4"	1"	—	Yes	50	210	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	0000000	00000
				—	48	—	Can	—	30	24 hr.	Paste	Yes	1:1	340 in² @ 1/4"	1"	—	Yes	50	210	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	0000000	00000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

										Temp. Range, ° F
	Mfr. Model No.	Container Type	Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength	Mixing Req.	Mix Ratio	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Devcon Zip Patch™



		11500	Patch	4"	9"	5	4 hr.	No	—	Yes	-40	200	Brown	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood	0000000	0000000


		Epoxy Surface Fillers



				—	Patch	4"	6"	1	30 min.	Yes	1:1	Yes	—	425	Clear	Sand	Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	00000000	00000

Plastic Spot Welder Kits

Weld stainless steel staple-like stakes into the surface of plastics to repair cracks.

Wattage, mW	Temp., ° F	Cord Lg., ft.	Plug Connection NEMA Type	Includes		Each



120	120	575 to 875	4	5-15	Resistance Welder 100 M-Shaped Stakes for Tabs and Narrow Sections 100 S-Shaped Stakes for Flat Surfaces 100 V-Shaped Stakes for Inside Corners 100 W-Shaped Stakes for Outside Corners	000000	0000000

Accessories and Replacements for Spot Welders

Shape	Pkg. Qty.		Pkg.
Wire	2	0000000	000000

Shape	Pkg. Qty.	Pkg.
M	25	000000
S	25	00000
V	25	00000
W	25	00000

Surface Fillers for Plastic


Epoxy Stick	Cartridge

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Cartridge—Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).

Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.

	Container													Temp. Range, ° F
	Size, fl. oz.	Net Wt., oz.	Type	Lg.	Begins to Harden	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	Dia.	For Use Outdoors	Min.	Max.	Color	Food Industry Std.	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		—	4	Stick	8"	20 min.	24 hr.	Putty	Yes	—	16 in² @ 1/4"	1/2"	1"	Yes	-40	250	Off-White	NSF/ANSI 61	Drill, Sand, Saw	ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF	0000000	000000


		1.7	—	Cartridge	—	5 min.	30 min.	Thick Liquid	Yes	1:1	11 in² @ 1/4"	Not Rated	—	No	-20	180	Gray	—	Sand	ABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF	0000000	00000


		Urethane Rubber Surface Fillers



				1.7	—	Cartridge	—	20 sec.	60 min.	Thick Liquid	Yes	1:1	11 in² @ 1/4"	Not Rated	—	No	-20	180	Amber	—	Sand	ABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF	0000000	00000


				1.7	—	Cartridge	—	50 sec.	60 min.	Thick Liquid	Yes	1:1	11 in² @ 1/4"	Not Rated	—	No	-20	180	Black	—	Sand	ABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF	0000000	00000

Accessories and Replacements for Surface Fillers

		Each
Dispensing Gun for Surface Fillers in a Cartridge	0000000	0000000
Primer for Surface Fillers in a Cartridge	0000000	00000
Replacement Mixer Nozzle for Surface Fillers in a Cartridge	0000000	0000

Ultrasonic Welders

Use sound waves to heat up your materials and weld them together with these welders, guns, and tips. They create clean spot welds in seconds. Weld plastic to itself or to other materials, such as steel. These welders don’t use direct heat, so they’re less likely to distort or discolor your weld than hot-air welders.

Welders

Input					Overall
Voltage, V AC	Freq., Hz	Current, amp	Phase	Output Power, W	Ht.	Wd.	Dp.	Cord Lg., ft.	Electrical Connection	No. of Blades	Features		Each
120	50, 60	2	Single	150	9 1/2"	8"	15 1/2"	7	Straight Blade	3	PLC Integration	0000000	000000000

Guns

Straight Grip

Pistol Grip

Guns are handheld and attach to your welder.

Straight Grip—Straight-grip guns activate when you press them against your workpiece. They’re good for welding on a workbench and on other horizontal surfaces.

Pistol Grip—Pistol-grip guns activate with a trigger on the handle. They’re good for welding on vertical surfaces.

Grip Style	Freq., kHz	Cable Lg., ft.		Each
Straight	20	8	0000000	000000000
Pistol	20	8	0000000	00000000

Staking Tips

Tips fit into your gun. Staking tips weld dissimilar materials, such as plastic to steel.

For Max. Stake Ht.	Tip Dia.	Each
0.05"	1/2"	0000000
0.1"	1/2"	000000
0.15"	1/2"	000000
0.2"	1/2"	000000
0.25"	1/2"	000000
0.3"	1/2"	000000

Spot Tips

Tips fit into your gun. Spot tips weld plastic to itself.

For Max. Sheet Thk.	Tip Dia.	Each
0.03"	1/2"	0000000
0.04"	1/2"	000000
0.06"	1/2"	000000
0.07"	1/2"	000000
0.09"	1/2"	000000
0.1"	1/2"	000000

Hot Air Gun Welding Kits

No compressor needed—a hot-air gun welds your plastics.

For Rod Dia.	Input Voltage, V AC	Wattage, W	Airflow Rate, ft³/min	Temp. Range, ° F	Temp. Control Increment, ° F	Cord Lg., ft.	No. of Blades	Features	Includes		Each
1/8", 5/32", 3/16", 7/32", 1/4"	120	1,560	4 to 18	75 to 1,200	10	6	2	Bluetooth	High-Speed Tip for Rods Up to 1/4" Diameter Tip for Tack Welds 3/8" Reducer for Attaching Tips 5/8" Reducer for Concentrated Airflow 1 Welding Iron for 3/8" Reducer 1 1/4" Shrink Attachment for Tubing and Pipe 4 Pieces of 4" × 3" Stainless Steel Wire Mesh Screens 6 Pieces of 1/8" Diameter × 9" Long ABS Rod 6 Pieces of 1/8" Diameter × 9" Long HDPE Rod 6 Pieces of 1/8" Diameter × 9" Long LDPE Rod 6 Pieces of 1/8" Diameter × 9" Long Polypropylene Rod 6 Pieces of ⅛" Diameter × 9" Long PVC Rod 6 Pieces of 3/16” Diameter × 12” Long Fiber-Flex Rods Plastic Carrying Case	0000000	0000000

Aerosol Surface Fillers for Plastic

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon. Surface fillers are clear when dry.

Match the appearance of the surface filler to your part.

Satin—Satin reflects the most light and seems to shine.

Matte—Matte reflects almost no light and appears dull. Eggshell reflects some light but is duller than satin.

Eggshell—Eggshell reflects some light but is duller than satin.

Cannot Be Sold to Canada—They cannot be sold to Canada due to local chemical regulations.

		Container										Temp. Range, ° F
	Appearance	Net Wt., oz.	Type	Spray Position	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Mixing Req.	Approx. Coverage @ Thk.	Max. Thk., mil	For Use Outdoors	Min.	Max.	Color	For Use On	Cannot Be Sold To		Each
ABS Surface Fillers



		Satin	16	Aerosol Can	Upright	5	60	Thin Liquid	No	15 ft² @ 1 mil	1	No	45	100	Clear	ABS, Glass-Filled Nylon, Polystyrene	Canada	0000000	000000


		Matte	16	Aerosol Can	Upright	5	60	Thin Liquid	No	15 ft² @ 1 mil	1	No	45	100	Clear	ABS, Glass-Filled Nylon, Polystyrene	Canada	0000000	00000
		Eggshell	16	Aerosol Can	Upright	5	60	Thin Liquid	No	15 ft² @ 1 mil	1	No	45	100	Clear	ABS, Glass-Filled Nylon, Polystyrene	Canada	0000000	00000

Plastic Cleaners

Aerosol

Can

Safe to use on all plastics, including acrylic, polycarbonate, and fiberglass, these cleaners remove dirt and other contaminants without streaking. They also protect against smudges and repel dust.

	Container						Each		Package
	Type	Net Wt., oz.	Solution Type	Harshness	For Use On	For Removing		Each	Pkg. Qty.		Pkg.
Liquids



		Aerosol Can	20	Water Based	Mild	Fiberglass, Plastic	Dirt	0000000	00000	12	0000000	000000

Scratch-Removing Buffing Kits

For Plastic

Remove minor scratches, scuffs, cloudy surfaces, and hard water etching from glass or plastic. Microns and grit are approximate.

	Includes	Abrasive Material	For Finish		Each
For Plastic



	9	One 10 Micron (2000 Grit) Peparation Sponge One Mist Nozzle One Prep Sponge One Restorative Spray — 1 oz. One Spray Protectant —1 oz. One UV Spout Cap Two Applicator Wipes Two Gloves	Aluminum Oxide	Polished	0000000	000000

Hot Air Welding Kits

Use hot compressed air to weld plastics.

Hot Air Welders

For Nitrogen Gas—Kits for nitrogen gas can be used when welding polyethylene or polypropylene to prevent possible oxidation (air bubbles).

				Temperature @ 3 psi, ° F
	For Rod Dia.	Input Voltage, V AC	Wattage, W	Min.	Max.	Cord Lg., ft.	No. of Blades	Includes		Each
For Use With Hot Air, Nitrogen Gas



		1/8", 5/32", 3/16"	120	450	—	700	2	3	Welding Torch Combination Tip for Tack and Continuous Welds 12-ft. Air Hose with 1/4 NPT Male Fitting Air Regulator Pressure Gauge 450-watt Heating Element Plastic Carrying Case	000000	0000000


		1/8", 5/32", 3/16"	120	450, 550, 650	700	880	2	3	Welding Torch Combination Tip for Tack and Continuous Welds Tip for Tack Welds Tip for Continuous Welds 12-ft. Air Hose with 1/4 NPT Male Fitting Air Regulator Pressure Gauge 450-watt Heating Element 550-watt Heating Element 650-watt Heating Element Plastic Carrying Case	0000000	000000
		1/8", 5/32", 3/16", 7/32", 1/4"	120	650, 750	880	1,020	2	3	Welding Torch Combination Tip for Tack and Continuous Welds Tip for Tack Welds 12-ft. Air Hose with 1/4 NPT Male Fitting Air Regulator Pressure Gauge 650-watt Heating Element 750-watt Heating Element Plastic Carrying Case	00000000	000000

Accessories and Replacements for Hot Air Welders

Wattage, W		Each
450	0000000	000000
550	0000000	00000
650	0000000	00000
750	00000000	00000

	For Rod Dia.
Combination Tip


1/8", 5/32", 3/16"	0000000	000000

High-Speed Tips

High-Speed Tips—High-speed tips heat the welding rod and the materials being welded at the same time to make fast, uniform welds.

		Each
High Speed



	1/8", 5/32"	0000000	0000000


	3/16"	0000000	000000

Hot Air Welders with Built-In Air Compressor

					Temperature @ 3 psi, ° F
	For Rod Dia.	Input Voltage, V AC	Wattage, W	Airflow Rate @ Pressure	Min.	Max.	Cord Lg., ft.	No. of Blades	Includes		Each
For Use With Hot Air



		1/8", 5/32", 3/16"	120	450, 550	2.5 scfm @ 3 psi	700	800	2	3	Welding Torch Combination Tip for Tack and Continuous Welds 12-ft. Air Hose with 1/4 NPT Male Fitting Air Regulator Pressure Gauge 450-watt Heating Element 550-watt Heating Element Plastic Carrying Case	0000000	000000000


		1/8", 5/32", 3/16", 7/32", 1/4"	120	650, 750	4.5 scfm @ 3 psi	880	1,020	2	3	Welding Torch Combination Tip for Tack and Continuous Welds Tip for Tack Welds 12-ft. Air Hose with 1/4 NPT Male Fitting Air Regulator Pressure Gauge 650-watt Heating Element 750-watt Heating Element Plastic Carrying Case	00000000	00000000

Accessories and Replacements for Hot Air Welders

Wattage, W		Each
450	0000000	000000
550	0000000	00000
650	0000000	00000
750	00000000	00000

	For Rod Dia.
Combination Tip


1/8", 5/32", 3/16"	0000000	000000

High-Speed Tips

High-Speed Tips—High-speed tips heat the welding rod and the materials being welded at the same time to make fast, uniform welds.

		Each
High Speed



	1/8", 5/32"	0000000	0000000


	3/16"	0000000	000000

Plastic Polish/Cleaners

Clean, shine, and protect plastics such as acrylic without scratching. These cleaners also repel dust and eliminate static.

Note: Not for use on plastics that have an anti-glare coating.

Polish/Cleaner—Liquid

Spray

Bottle

Container							Each
Type	Size, fl. oz.	Solution Type	Harshness	For Use On	For Removing		1-23	24-Up
Spray Bottle	8	Water Based	Moderate	Fiberglass, Plastic	Dirt	0000000	00000	00000

Scratch Removing Polish for Plastic

Remove scratches, haziness, and abrasions from plastic surfaces.

Note: Not for use on coated plastics, polycarbonate, or eyeglass lenses.

Polish/Cleaner—Paste

For Fine Scratches—Fine scratch removers repair minor abrasions and haziness on all plastic surfaces. After restoring the surface, seal it with a coat of plastic polish.

For Deep Scratches—Deep scratch removers repair heavy scratches and abrasions. The fine scratch remover is required for final finishing.

	Container							Each
For Scratch Type	Type	Size, fl. oz.	Solution Type	Harshness	For Use On	For Removing		1-23	24-Up
Fine	Squeeze Bottle	8	Water Based	Moderate	Plastic	Scratches	0000000	00000	00000
Deep	Squeeze Bottle	8	Water Based	Mild	Plastic	Scratches	0000000	00000	0000

Water-Resistant Surface Filler Kits

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

West System 105K

Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Filler Kits.

Includes	Formulation	Consistency	For Use Outdoors	Temp. Range, ° F	Process After Hardening	For Use On		Each
8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves	Epoxy	Thin Liquid	Yes	35 to 130	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, ABS, PVC, Fiberglass, Wood	0000000	000000

Replacement Parts for Surface Fillers

			Container
Component	No. of Pieces	Mfr. Model No.	Size	Type	Lg.	Wd.		Each
Two-Part Epoxy	6	101-TS	0.6 fl. oz.	Single-Use Packet	—	—	0000000	000000
Resin	1	105	1 qt.	Can	—	—	0000000	00000
Fast Hardener	1	205	7 fl. oz.	Can	—	—	0000000	00000
Slow Hardener	1	206	7 fl. oz.	Can	—	—	0000000	00000
Colloidal Silica Filler	1	406	1.7 fl. oz.	Canister	—	—	0000000	00000
Colloidal Silica Filler	1	406	5.5 fl. oz.	Canister	—	—	0000000	00000
Low-Density Filler	1	410	5 fl. oz.	Canister	—	—	0000000	00000
Mini Dispensing Pump	3	300	—	—	—	—	0000000	00000
Fiberglass Cloth	1	745	—	—	30"	30"	0000000	00000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

	Container						Temp. Range
	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Mixing Req.	Min.	Max., ° F	Color	Specs. Met	For Use On		Each
Surface Fillers



		16	Jug	7	10	Thick Liquid	No	Not Rated	500	Brown	ASTM D3147	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, PTFE, Polyethylene, Polypropylene, Polyimide, Polystyrene, PVC, PVDF	0000000	000000

Mold Repair Kits

Keep these kits on hand to repair damaged molds. They come with everything you need to smooth bumps, buff scratches, and shine surfaces.

No. of Pieces	Includes	For Use On	For Finish	Container Type		Each
77	Twenty Aluminum-Oxide Polishing Stones (100-1200 Grit) Nine Silicon-Carbide Polishing Stones (120-1200 Grit) One Polishing Stone Holder One 2 oz. Bottle of Lubricant Three Horse-Hair Polishing Brushes (Cup-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Horse-Hair Polishing Brushes (End-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Steel Polishing Brushes (End-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (60 Grit)—3/16" Head Dia. × 3/16" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (60 Grit)—1/4" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (120 Grit)—1/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (120 Grit)—7/32" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. One Aluminum-Oxide Belt Sanding Stick (320 Grit) Eleven Birch Wood Lapping Sticks Three 2 gram Syringes of Polished-Finish (2-22 Microns) Diamond Lapping Paste One 50 gram Tube of Mold Polish Three Polishing Bobs (Flat-Tip Cylinder) —1/4" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Polishing Bobs (Round-Tip Cone)—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Polishing Bobs (Bevel-Tip Rectangle)—1/4" Head Wd. × 1" Head Lg. × 1/8" Shank Dia.	Aluminum, Brass, Ceramic, Copper, Iron, Lead, Masonry, Plastic, Tin	Smooth, Extra Smooth, Polished	Plastic Case	0000000	0000000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.

3 pt. Container—3-pint container can treat a 20-gallon fuel tank.

	Container								Temp. Range, ° F
	Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		1.5	Can	5	24	Thick Liquid	Yes	2:1	No	70	90	Amber	Drill, Sand, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass	0000000	000000


		3	Can	5	24	Thick Liquid	Yes	2:1	No	70	90	Amber	Drill, Sand, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass	0000000	000000

Surface Fillers

Epoxy

Mixer Cup

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

		Container										Temp. Range, ° F
	Mfr. Model No.	Net Wt., oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy



		EA 445	0.12	Mixer Cup	5	12	Thick Liquid	Yes	1:1	1 in² @ 1/4"	1/4"	Yes	-65	180	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	0000000	000000


		EA 445	1	Mixer Cup	5	12	Thick Liquid	Yes	1:1	1 in² @ 1/4"	1/4"	Yes	-65	180	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	0000000	000000
		EA 9131	0.12	Mixer Cup	90	24	Thick Liquid	Yes	1.5:1	1 in² @ 1/4"	1/4"	Yes	-65	180	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	0000000	00000

Mold Polish

Polish molds, dies, fixtures, and molded materials. This polish removes plate-out, oxidation, and stains.

Polish/Cleaner—Paste


Tube	Jar	Pail

Container						Each		Package
Type	Net Wt.	Solution Type	Harshness	For Use On	For Removing		Each	Pkg. Qty.		Pkg.
Tube	3 oz.	Water Based	Moderate	Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel	Dirt, Grease, Oil, Tar, Wax	00000000	00000	12	000000000	0000000
Jar	1 lb.	Water Based	Moderate	Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel	Dirt, Grease, Oil, Tar, Wax	00000000	00000	—	———	0
Pail	5 lb.	Water Based	Moderate	Aluminum, Brass, Bronze, Chrome, Copper, Galvanized Steel, Iron, Plastic, Stainless Steel, Steel	Dirt, Grease, Oil, Tar, Wax	00000000	00000	—	———	0

Light-Activated Surface Fillers


Epoxy Bottle	Polyester Plastic, Tube

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Epoxy—Epoxy fillers provide better adhesion and more corrosion resistance than polyester plastic fillers.

	Container										Temp. Range, ° F
	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, min.	Consistency	Mixing Req.	For Max. Crack Wd.	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		3.5	Bottle	1	5	Putty	No	1"	24 in² @ 1/4"	1/2"	Yes	-40	270	Amber	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	00000000	000000


		Polyester Plastic Surface Fillers



				3.5	Tube	1	3	Putty	No	1"	24 in² @ 1/4"	1/2"	Yes	-40	220	White	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	00000000	00000

Spin-Weld LDPE Tank Patches

Repair holes in LDPE tanks and containers with these patches. As you spin these patches with a handheld electric router, they melt into the surface of your tank for a seal without any joints. To hold these patches in your router, you’ll need the installation tool (sold separately).

For proper installation, you’ll want to use a hole saw to drill a hole that matches the For Hole Diameter listed and check that your router meets the speed and power requirements shown in the table.

				For Tank		For Router
OD	For Hole Dia.	For Min. Wall Thk.	Material	Material	Surface	Power, hp	Speed, rpm	Temp. Range, ° F	Color	For Use With		Each
2 1/4"	1.55"	3/16"	LDPE	LDPE	Flat	1 1/2	18,000 to 25,000	40 to 140	White	Oil, Water	0000000	00000
3 3/8"	2.2"	3/16"	LDPE	LDPE	Flat	1 1/2	18,000 to 25,000	40 to 140	White	Oil, Water	0000000	0000

Installation Tools

Surface Fillers for Canvas and Leather

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

	Container							Temp. Range, ° F
	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Mixing Req.	For Use Outdoors	Min.	Max.	Color	For Use On		Each
Latex Surface Fillers



		6	Bottle	3	30	Thin Liquid	No	Yes	35	210	Beige	Leather, Canvas, Acrylic Fabric	0000000	000000


		16	Bottle	3	30	Thin Liquid	No	Yes	35	210	Beige	Leather, Canvas, Acrylic Fabric	0000000	00000

For Patch OD	Shank Dia.	Overall Lg.	Material	Shank Type	For Tool Type		Each
2 1/4"	1/2"	1 7/8"	Aluminum	Round	Hand Router	000000	0000000
3 3/8"	1/2"	2"	Aluminum	Round	Hand Router	000000	000000


M-Shape	S-Shape	V-Shape	W-Shape