1 3/4" Plastic Sheets | McMaster-Carr

Filter by

System of Measurement

Width

Length

Shape

Color

Material

Performance

Electrically Insulating

Ultra Impact Resistant

Backing Type

Flexibility

Maximum Temperature

For Use Outdoors

Hardness Rating

Texture

For Use With

Acetic Acid (White Vinegar)

Methanol (Methyl Alcohol)

Methyl Ethyl Ketone (MEK)

Comparable To

RoHS

REACH

Tensile Strength

3,920 psi to 4,200 psi

4,350 psi to 5,800 psi

9,135 psi to 9,700 psi

10,000 psi

10,000 psi to 11,000 psi

11,200 psi to 12,300 psi

32,000 psi to 40,000 psi

35,000 psi to 50,000 psi

Dielectric Strength

300 V/mil to 400 V/mil

350 V/mil

350 V/mil to 800 V/mil

410 V/mil to 500 V/mil

450 V/mil to 500 V/mil

450 V/mil to 510 V/mil

500 V/mil

2,280 V/mil to 2,300 V/mil

Not Rated

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Application

Multipurpose

Export Control Classification Number (ECCN)

Minimum Temperature

Density

118 Products

Multipurpose Flame-Retardant Garolite G-10/FR4 Sheets and Bars

A good all-around choice, these Garolite G-10/FR4 sheets and bars are strong, machinable, and electrically insulating. They're made of a flame-retardant epoxy resin with fiberglass fabric reinforcement. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.

If you don't see the size you're looking for, please specify a length under additional bar lengths.

Bar

Image of Product. Front orientation. Garolite. Multipurpose Flame-Retardant Garolite G-10/FR4 Sheets and Bars.

Yellow—Yellow sheets vary in shade from yellow-brown to light green.

	Impact Strength, ft·lbf/in	Hardness	For Use Outdoors	Mil. Spec.	Flammability Rating		2 ft. Long	4 ft. Long
Yellow







	1 3/4" Thick (-0.067" to 0.067")

	1 1/2"	265	35,000 to 50,000	5.5 to 12	Rockwell M100 (Extra Hard)	No	MIL-I-24768/27	UL 94 V-0	8557K92	000000	0000000


	2"	265	35,000 to 50,000	5.5 to 12	Rockwell M100 (Extra Hard)	No	MIL-I-24768/27	UL 94 V-0	8557K93	00000	000000
	3"	265	35,000 to 50,000	5.5 to 12	Rockwell M100 (Extra Hard)	No	MIL-I-24768/27	UL 94 V-0	8557K95	000000	000000

Additional Bar Lengths

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Impact Strength, ft·lbf/in	Hardness	For Use Outdoors	Mil. Spec.	Flammability Rating	Choose a Length		Per Inch
Green







	1 3/4" Thick (-0.067" to 0.067")

	1"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N361	00000


	1 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N362	00000
	2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N363	00000
	2 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N364	00000
	3"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N365	00000
	3 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N366	00000
	4"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N367	00000
	4 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N368	00000
	5"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N369	00000
	5 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N371	00000
	6"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N372	00000


	6 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N373	00000
	7"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N374	00000
	7 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N375	00000
	8"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N376	00000
	8 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N377	00000
	9"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N378	00000
	9 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N379	00000
	10"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N381	00000
	10 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N382	00000
	11"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N383	00000


	11 1/2"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N384	00000
	12"	280	32,000 to 40,000	5.5 to 9.5	Rockwell M115 (Extra Hard)	Yes	MIL-I-24768/27	UL 94 V-0	3.000" to 95.000"	6275N385	00000

Ultra-Machinable Delrin® Acetal Sheets

These sheets resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

							Black		White
	Wd.	Lg.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in		Each	Food Industry Std.		Each
1 3/4" Thick (-0.125" to 0.25" Tolerance)



		6"	6"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K149	000000	FDA Standard, NSF Standard	8573K129	000000


		1 3/4" Thick (0" to 0.05" Tolerance)



				12"	12"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K161	000000	FDA Standard, NSF Standard	8573K25	000000


				12"	24"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K165	000000	FDA Standard, NSF Standard	8573K45	000000
				12"	48"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K173	000000	FDA Standard, NSF Standard	8573K97	000000
				24"	24"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K184	000000	FDA Standard, NSF Standard	8573K85	000000
				24"	48"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K193	00000000	FDA Standard, NSF Standard	8573K181	00000000

Ultra-Low-Friction UHMW Polyethylene Bars

In addition to having a low-friction surface that prevents sticking and binding, this tough, impact- and wear-resistant material handles the scuffs, scrapes, and strikes that other plastic can’t. These bars are often used to make machine guards and chute liners. They are all FDA compliant for direct food contact.

Black

Image of Product. Front orientation. Plastic. Ultra-Low-Friction UHMW Polyethylene Bars.

	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Flammability Rating	Food Industry Std.	Choose a Length, ft.		Per Ft.
1 3/4" Thick (-0.125" to 0.125" Tolerance)



	1 3/4"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K615	000000


	2"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K616	00000
	2 1/4"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K617	00000
	2 1/2"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K618	00000
	3"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K619	00000
	4"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K621	00000
	5"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K622	00000
	6"	Extruded	-20 to 180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	1, 2, 3, 4, 5	8702K623	00000

White

Skived—Skived products are more likely to curl than extruded and molded products.

	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Specs. Met	Flammability Rating	Mil. Spec.	Food Industry Std.	Choose a Length, ft.		Per Ft.
1 3/4" Thick (-0.125" to 0.125" Tolerance)



	1 3/4"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	—	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	6509A13	000000


	2"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K451	00000
	2 1/4"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K452	00000
	2 1/2"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K453	00000
	3"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K454	00000
	4"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K456	00000
	5"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K457	00000
	6"	Extruded	-20 to 180	4,350 to 5,800	16.8	—	UL 94 HB	—	FDA Standard	1, 2, 3, 4, 5	8702K458	00000

Ultra-Machinable Acetal Sheets

An economical alternative to Delrin® acetal resin, these acetal copolymer sheets offer the same naturally slippery surface and similar wear resistance. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Use them for parts that require precision, such as gears, bearings, and bushings.

								Black		White
	Wd.	Lg.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Food Industry Std.		Each		Each
1 3/4" Thick (-0.016" to 0.025" Tolerance)



		6"	6"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K919	000000	8492K917	000000


		12"	12"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K194	000000	8492K192	000000
		12"	24"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K294	000000	8492K292	000000
		12"	48"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K394	000000	8492K392	000000
		24"	24"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K494	000000	8492K492	000000
		24"	48"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K594	00000000	8492K592	00000000

Ultra-Machinable Delrin® Acetal Bars

These bars resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

							Black		White
	Wd.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Choose a Length, ft.		Per Ft.	Food Industry Std.		Per Ft.
1 3/4" Thick (0" to 0.025" Tolerance)



		1"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K91	000000	FDA Standard	8739K72	000000


		1 1/2"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K92	00000	FDA Standard	8739K73	00000
		1 3/4"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8663K25	00000	FDA Standard	8741K48	00000
		2"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K93	00000	FDA Standard	8739K74	00000
		2 1/2"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K94	00000	FDA Standard	8739K75	00000
		3"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K95	00000	FDA Standard	8739K76	00000
		4"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K96	00000	FDA Standard	8739K77	00000
		5"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K288	000000	FDA Standard	8739K78	000000
		6"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8662K289	000000	FDA Standard	8739K79	000000

Highly Moisture-Resistant HDPE Bars

Practically nonabsorbent, these bars won't swell when exposed to water. They’re harder and denser than LDPE, plus they’re more chemical resistant. They are often machined into plugs, seals, and containers.

	Fabrication	Min. Temp.	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Flammability Rating	Food Industry Std.	Choose a Length, ft.		Per Ft.
1 3/4" Thick (-0.175" to 0.175" Tolerance)



	1"	Molded	Not Rated	180	3,920 to 4,200	1.1 to 1.94	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8671K18	00000


	1 1/2"	Molded	Not Rated	180	3,920 to 4,200	1.1 to 1.94	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8671K29	00000
	2"	Molded	Not Rated	180	3,920 to 4,200	1.1 to 1.94	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8671K41	00000
	2 1/2"	Molded	Not Rated	180	3,920 to 4,200	1.1 to 1.94	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8671K54	00000
	3"	Molded	Not Rated	180	3,920 to 4,200	1.1 to 1.94	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8671K66	00000
	4"	Molded	Not Rated	180	3,920 to 4,200	1.1 to 1.94	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8671K78	00000

Multipurpose Polypropylene Bars

Because these bars resist swelling when exposed to water, they’re often fabricated into containers and parts for laboratory equipment. Polypropylene has a hard, slippery surface that won’t bind or stick to cutting tools, plus it provides good electrical insulation.

	Fabrication	Min. Temp.	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Flammability Rating	Food Industry Std.	Choose a Length, ft.		Per Ft.
1 3/4" Thick (-0.175" to 0.175" Tolerance)



	1"	Molded	Not Rated	225	2,700	0.8 to 1.3	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8782K18	00000


	1 1/2"	Molded	Not Rated	225	2,700	0.8 to 1.3	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8782K29	0000
	2"	Molded	Not Rated	225	2,700	0.8 to 1.3	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8782K41	00000
	2 1/2"	Molded	Not Rated	225	2,700	0.8 to 1.3	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8782K54	00000
	3"	Molded	Not Rated	225	2,700	0.8 to 1.3	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8782K66	00000
	4"	Molded	Not Rated	225	2,700	0.8 to 1.3	Semi-Clear White	UL 94 HB	FDA Standard	1, 2, 3, 4	8782K78	00000

Wear-Resistant Nylon Bars

With a slippery surface that reduces friction, these wear-resistant nylon 6/6 bars are often machined into bearings, gears, and valve seats.

	Fabrication	Min. Temp.	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Flammability Rating	Food Industry Std.	Choose a Length, ft.		Per Ft.
1 3/4" Thick (0" to 0.06" Tolerance)



	1"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K185	000000


	1"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K841	00000
	1 1/2"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K186	00000
	1 1/2"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K842	00000
	2"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K187	00000
	2"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K843	00000
	2 1/2"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K188	00000
	2 1/2"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K844	00000
	3"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K189	00000
	3"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K845	00000
	4"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K194	00000


	4"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K846	00000
	6"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Black	UL 94 HB	—	1, 2, 3, 4	8674K803	000000
	6"	Extruded	Not Rated	210	11,200 to 12,300	0.6 to 1.4	Off-White	UL 94 V-2	FDA Standard	1, 2, 3, 4	8733K847	000000

Rigid PVC Foam Cores

Plain

Add stiffness to composite sandwiches without adding a lot of weight. These cores are lighter in weight than balsa wood and aluminum honeycomb cores, but not as strong. Their cross-linked foam polymers, however, make them stronger and more durable than PET foam cores. All of these cores are moisture resistant and offer good sound insulation. Use them in composite layups, structural panels, partitions, and industrial tanks.

	Tensile Strength, psi	Color		Each
Plain







	1 3/4" Thick (-0.02" to 0.02" Tolerance)

	40"	86"	170	370	Green	5911N38	0000000

Machinable Cast Nylon Bars

In addition to being easier to machine than standard nylon 6/6, these cast nylon 6 bars are also better electrical insulators. They have a wear-resistant, slippery surface that reduces friction. Use them to make gears, sprockets, and wear strips. This material is comparable to Nylatron and Nycast.

	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Color	Flammability Rating	Food Industry Std.	Choose a Length, ft.		Per Ft.
1 3/4" Thick (0" to 0.025" Tolerance)



	1"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K18	000000


	1 1/2"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K28	00000
	2"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K38	00000
	2 1/2"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K49	00000
	3"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K61	00000
	4"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K73	000000
	6"	Cast	-20	200	10,000	1.5	Off-White	UL 94 HB	FDA Standard	1, 2, 3, 4	8687K139	000000