2 1/2" Plastic Sheets | McMaster-Carr

Filter by

System of Measurement

Width

Length

Shape

Color

Performance

Electrical Insulating

Ultra Impact Resistant

Material

Flexibility

Maximum Temperature

Hardness Rating

Comparable To

Dielectric Strength

300 V/mil to 400 V/mil

350 V/mil to 800 V/mil

400 V/mil to 500 V/mil

410 V/mil to 500 V/mil

450 V/mil to 500 V/mil

2,280 V/mil to 2,300 V/mil

Clarity

Backing Type

For Use With

Methyl Ethyl Ketone (MEK)

Mineral Oil

Sodium Hydroxide (Caustic Soda)

DFARS Specialty Metals

Exempt

Tolerance Rating

Oversized

Standard

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

Water Absorption

Density

Impact Strength

0.3 ft·lbf/in to 0.4 ft·lbf/in

0.6 ft·lbf/in to 1.4 ft·lbf/in

1 ft·lbf/in to 1.5 ft·lbf/in

5.5 ft·lbf/in to 12 ft·lbf/in

16.8 ft·lbf/in

Minimum Temperature

-49° F to -1° F

Not Rated

Export Control Classification Number (ECCN)

REACH

61 Products

Multipurpose Flame-Retardant Garolite G-10/FR4 Sheets and Bars

A good all-around choice, these Garolite G-10/FR4 sheets and bars are strong, machinable, and electrically insulating. They're made of a flame-retardant epoxy resin with fiberglass fabric reinforcement. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.

If you don't see the size you're looking for, please specify a length under additional bar lengths.

Sheet

Yellow—Yellow sheets vary in shade from yellow-brown to light green.

								6" × 6"		12" × 12"		12" × 24"		24" × 24"		24" × 36"		36" × 48"
	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Hardness	For Use Outdoors	Mil. Spec.	Flammability Rating		Each		Each		Each		Each		Each		Each
Yellow







				2 1/2" Thick (-0.091" to 0.091")

				280	35,000 to 50,000	5.5 to 12	Rockwell M110 (Extra Hard)	No	MIL-I-24768/27	UL 94 V-0	8667K151	0000000	8667K152	0000000	8667K153	0000000	8667K154	000000000	8667K155	000000000	8667K156	000000000

Ultra-Low-Friction UHMW Polyethylene Sheets

In addition to having a low-friction surface that prevents sticking and binding, this tough, impact- and wear-resistant material handles the scuffs, scrapes, and strikes that other plastic can’t. These sheets are often used to make machine guards and chute liners. They are all FDA compliant for direct food contact.

If you don't see the size of white sheet you're looking for, check out our Made-to-Order UHMW Polyethylene Sheets.

	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Flammability Rating	Food Industry Std.		Each
Black







	2 1/2" Thick (-0.125" to 0.125" Tolerance)

	6"	6"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	4296A171	000000


	6"	12"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	4296A186	00000
	12"	12"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	4296A216	000000
	12"	24"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	4296A316	000000
	12"	36"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	4296A621	000000
	24"	24"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	4296A566	000000


	White







					2 1/2" Thick (-0.125" to 0.125" Tolerance)

					6"	6"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	8752K942	00000


					6"	12"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	8752K853	00000
					12"	12"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	8752K943	000000
					12"	24"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	8752K232	000000
					12"	36"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	8752K332	000000
					24"	24"	Extruded	-40	180	4,350 to 5,800	16.8	UL 94 HB	FDA Standard	8752K432	000000

Ultra-Machinable Delrin® Acetal Sheets

These sheets resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

							Black		White
	Wd.	Lg.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in		Each	Food Industry Std.		Each
2 1/2" Thick (-0.125" to 0.25" Tolerance)



		6"	6"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K153	0000000	FDA Standard, NSF Standard	8573K133	0000000


		2 1/2" Thick (0" to 0.05" Tolerance)



				12"	12"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K711	000000	FDA Standard, NSF Standard	8573K67	000000


				12"	24"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K721	000000	FDA Standard, NSF Standard	8573K68	000000
				12"	48"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K176	00000000	FDA Standard, NSF Standard	8573K69	00000000
				24"	24"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K741	00000000	FDA Standard, NSF Standard	8573K172	00000000
				24"	48"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	8575K196	00000000	FDA Standard, NSF Standard	8573K184	00000000

Clear Machinable Cast Acrylic Sheets

These cast acrylic sheets are often fabricated into tanks, see-through barrier panels, and light fixture lenses. Cast acrylic, which is comparable to Lucite and Plexiglas® acrylic, is easier to machine than extruded acrylic. The material is scratch resistant and stands up to outdoor use better than polycarbonate. It maintains clarity over time and won't weaken from exposure to UV, though the pigment in colored acrylic will fade over time when exposed to direct sunlight.

	Lg.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Food Industry Std.	Color		Each
2 1/2" Thick (-0.181" to 0.079" Tolerance)



	6"	6"	Cast	-40 to 170	10,000 to 11,250	0.3 to 0.4	FDA Standard	Clear	8560K927	000000


	6"	12"	Cast	-40 to 170	10,000 to 11,250	0.3 to 0.4	FDA Standard	Clear	8560K953	000000
	12"	12"	Cast	-40 to 170	10,000 to 11,250	0.3 to 0.4	FDA Standard	Clear	8560K916	000000
	12"	24"	Cast	-40 to 170	10,000 to 11,250	0.3 to 0.4	FDA Standard	Clear	8560K937	000000
	12"	36"	Cast	-40 to 170	10,000 to 11,250	0.3 to 0.4	FDA Standard	Clear	8560K938	000000

Ultra-Low-Friction UHMW Polyethylene Bars

In addition to having a low-friction surface that prevents sticking and binding, this tough, impact- and wear-resistant material handles the scuffs, scrapes, and strikes that other plastic can’t. These bars are often used to make machine guards and chute liners. They are all FDA compliant for direct food contact.

Black

Image of Product. Front orientation. Plastic. Ultra-Low-Friction UHMW Polyethylene Bars.

Skived—Skived products are more likely to curl than extruded and molded products.

	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Specs. Met	Mil. Spec.	Food Industry Std.	Choose a Length, ft.		Per Ft.
2 1/2" Thick (-0.125" to 0.125" Tolerance)



	2 1/2"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K633	000000


	4"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K634	00000
	5"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K635	00000
	6"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K636	000000

White

Skived—Skived products are more likely to curl than extruded and molded products.

	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Specs. Met	Mil. Spec.	Food Industry Std.	Choose a Length, ft.		Per Ft.
2 1/2" Thick (-0.125" to 0.125" Tolerance)



	2 1/2"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K513	000000


	4"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K51	00000
	5"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K52	00000
	6"	Skived	-20 to 180	4,350 to 5,800	16.8	ISO 11542-1, ISO 11542-2	MIL-P-21922, MIL-P-23536	FDA Standard	1, 2, 3, 4, 5	8702K53	00000

Ultra-Machinable Delrin® Acetal Bars

These bars resist expanding when exposed to heat and moisture, so they can be easily machined to close tolerances. They also have a naturally slippery, wear-resistant surface. Use them to make precision gears, bushings, and bearings. Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

							Black		White
	Wd.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Choose a Length, ft.		Per Ft.	Food Industry Std.		Per Ft.
2 1/2" Thick (0" to 0.025" Tolerance)



		2 1/2"	Extruded	-20 to 180	10,000 to 11,000	1 to 1.5	1, 2, 3, 4	8663K261	000000	FDA Standard	8741K52	000000

Wear-Resistant Nylon Sheets

With a slippery surface that reduces friction, these wear-resistant nylon 6/6 sheets are often machined into bearings, gears, and valve seats.

								Black		Off-White
	Wd.	Lg.	Fabrication	Min. Temp., ° F	Max. Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in		Each	Flammability Rating	Food Industry Std.		Each
2 1/2" Thick (0" to 0.025" Tolerance)



		6"	6"	Extruded	-40	185	11,200 to 12,300	0.6 to 1.4	8540K329	000000	UL 94 V-2	FDA Standard	8539K211	0000000


		12"	12"	Extruded	-40	185	11,200 to 12,300	0.6 to 1.4	8540K131	000000	UL 94 V-2	FDA Standard	8539K26	000000
		12"	24"	Extruded	-40	185	11,200 to 12,300	0.6 to 1.4	8540K231	000000	UL 94 V-2	FDA Standard	8539K46	000000

Ultra-Machinable Acetal Sheets

An economical alternative to Delrin® acetal resin, these acetal copolymer sheets offer the same naturally slippery surface and similar wear resistance. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Use them for parts that require precision, such as gears, bearings, and bushings.

								Black		White
	Wd.	Lg.	Fabrication	Temp., ° F	Tensile Strength, psi	Impact Strength, ft·lbf/in	Food Industry Std.		Each		Each
2 1/2" Thick (-0.016" to 0.025" Tolerance)



		6"	6"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K949	000000	8492K947	000000


		12"	12"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K633	000000	8492K63	000000
		12"	24"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K733	000000	8492K73	000000
		12"	48"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K335	000000	8492K336	000000
		24"	24"	Extruded	-20 to 180	9,135 to 9,700	1 to 1.5	FDA Standard	8492K833	000000	8492K83	000000