We will reply to your message within an hour.
A rubber gasket provides a watertight seal.
These boxes have durable hinges and are more shatter resistant than other compartmented boxes.
At 5/8" tall and under, these boxes fit in spaces other boxes can’t.
These boxes have a coating on the dividers that protects metal parts from rust and corrosion.
Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.
Adjust the dividers to create the size and number of compartments that you need.
These boxes are made with an additive that protects sensitive contents from electrostatic discharge.
A rubber seal in the lid keeps water out.
Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.
With an impact-resistant shell and foam-padded interior, these cases will protect your equipment for years to come.
These versatile storage cases can be used with removable inner pouches.
Remove foam cubes to create a snug fit around equipment.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
Place these boxes on top of each other to make the most of your storage or shipping space.
Move and store materials in your food processing facility with these tote boxes—they have metal and chemical additives that will set off metal detectors and show up on X-ray machines if a piece falls into your line.
Hold and transport material with these boxes. They nest and stack for easy storage.
These tote boxes resist most chemicals, solvents, and oils.
The handholds allow stacking when locked upright and nesting when pushed down.
These tote boxes are nestable in one direction and stackable when turned in the opposite direction.
With a capacity of 150 lbs., these are our strongest vented tote boxes.
Finger-like dividers keep your parts organized and protected while they’re processed, transported, or stored.
Keep contents secure by attaching a padlock to both ends.
Save storage space with these collapsible tote boxes. They collapse to one-third their overall size.
Interlock the hinged lids and fasten them together with a wire seal or cable tie to securely store and transport contents.
Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
A lip on the back allows bin boxes to hang from rails or louvered panels.
Protect sensitive parts from electrostatic discharge.
A removable window allows 30% more capacity yet still lets you see what's in the box.
These bins dissipate static charges to protect sensitive contents from damage.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
The ribbed wall design allows the bins to stack or nest.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.
These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.
These plastic bin boxes are more durable than cardboard bin boxes but are just as easy to assemble without tape, glue, or fasteners.
Six compartments in one bin box let you keep items organized.
Stack bin boxes up to four high without removing the casters.
These bin boxes have a sloped top and a clear lid that slides back for easy access to contents.
The magnetic base attaches to any steel surface so you can position your pan where you need it. Drain holes in the bottom of the pan prevent dirt and moisture buildup.
Sort small items without losing pieces, then pour the rest back into the container.
A built-in faucet allows easy draining.
These durable pans are impact, wear, chemical, stain, and stick resistant.
Freeze these pans prior to use and the internal gel will keep contents below 40° F for eight hours.
Often used in cafeterias and food-processing areas, these pans meet NSF/ANSI 2 standards for food equipment.
To keep items from sliding off, these pans have a molded-in, slip-resistant rubber surface. Often used in cafeterias and food-processing areas, they meet NSF/ANSI 2 standards for food equipment.
Protect sensitive equipment from electrostatic discharge.
These durable plastic pans are impact, wear, chemical, stain, and stick resistant.
Collapse and stack containers when not in use to save valuable storage space.
The LED light in the handle illuminates the inside of the bag to help identify tools in low-light work areas
Catch 3 to 30 gallons of spills and drips.
These cabinets won't dent, chip, or rust.
Protect your sensitive components from electrostatic damage.
Plastic cabinets and boxes won't dent, chip, or rust.
Carry multiple compartmented boxes at once using the built-in handle.
These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.
Adjust these tubes by twisting the two halves. A hexagonal end prevents rolling.
Less likely to tip over or roll around during shipping compared to round and square tubes, these tubes are wider and flatter. Push the ends together or pull them apart to adjust the length.
Made of recycled polyethylene, these shipping tubes are more sustainable than standard plastic shipping tubes. Push the ends together or pull them apart to adjust the length.
Made of recycled polyethylene, these shipping tubes are a sustainable alternative to other plastic shipping tubes. They won’t roll around, making them easier to label and stack than round tubes.
These tubes have one sealed end and one end that closes with a cap.
Secure drill bits and other long, sharp items firmly in place for storage or transit. The end caps on these shipping tubes have an internal holder that keeps your item centered between the walls of the tube.
Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Mount these workstations on a flat vertical surface to create a steady horizontal surface for writing, typing, or tinkering.
Use these bins to hold small parts.