McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors.
    Made of Kevlar, these anchors withstand high heat and electrical arcs that would weaken a standard webbing anchor. They’ve been tested against the highest level of electrical arc-flash hazards to meet ASTM F887. Loop them around beams, rails, and other approved structures—they’re easy to move between work sites. Their webbing construction makes them lightweight and flexible. Plus, they won’t damage the anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Lg.,
    ft.
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    4KevlarD-Ring × Webbing Loop5,000425ANSI/ASSP Z359.18, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.5029656N110000000
     

    Flat Shackles for Lifting

    Lift with web slings. The wide, flat bow on these shackles prevents your sling from folding or bunching to keep loads distributed equally. All meet ASME specifications for rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as webbing shackles.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.
    High-Strength Painted Alloy Steel—The paint provides some corrosion resistance, but can chip or wear away over time.
    High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.
    For Web
    Wd.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Screw Pin
    Image of Product. Front orientation. Shackles. Flat Shackles for Lifting, Screw Pin.
     
    High-Strength Painted Alloy Steel
    1"3/4"7/8"3/4"1 1/2"1 13/32"6,500ASME B30.2635505T1000000
    1 1/2"1"1 1/4"29/32"1 29/32"1 3/4"13,000ASME B30.2635505T200000
    2"1 1/8"1 3/8"1"2 13/16"2 1/4"17,500ASME B30.2635505T300000
    3"1 3/8"1 5/8"1 1/4"3 1/16"3 1/4"25,000ASME B30.2635505T4000000
    4"1 3/4"2 1/8"1 1/2"5 1/4"4 1/2"41,000ASME B30.2635505T5000000
    5"2 1/4"2 1/2"2"6 11/32"5 1/2"70,000ASME B30.2635505T6000000
    6"2 3/4"3"2 1/4"7 23/32"6 1/2"100,000ASME B30.2635505T700000000
     
    Safety Cotter Pin
    Image of Product. Front orientation. Shackles. Flat Shackles for Lifting, Safety Cotter Pin.
     
    High-Strength Painted Alloy Steel
    1"9/16"1 1/16"3/4"1 1/2"1 13/32"6,500ASME B30.2635505T8400000
    1 1/2"3/4"1 1/4"29/32"1 29/32"1 3/4"13,000ASME B30.2635505T8500000
    2"7/8"1 3/8"1"2 13/16"2 1/4"17,500ASME B30.2635505T86000000
    3"1 1/8"1 5/8"1 1/4"3 1/16"3 1/4"25,000ASME B30.2635505T87000000
    4"1 3/8"2 1/8"1 1/2"5 1/4"4 1/2"41,000ASME B30.2635505T88000000
    5"1 3/4"2 1/2"2"6 11/32"5 1/2"70,000ASME B30.2635505T89000000
     
    High-Strength Galvanized Alloy Steel
    2"11/16"1 1/4"29/32"3 17/32"2 1/2"15,400ASME B30.264043N11000000
    3"15/16"1 11/16"1 5/32"4 5/8"3 1/4"27,500ASME B30.264043N12000000
    3 1/2"1 7/32"2 1/32"1 13/32"5 13/16"4"39,600ASME B30.264043N13000000
     

    Flat Shackles

    Image of Product. Front orientation. Shackles. Flat Shackles.
    Keep loads distributed equally when using a web sling. The wide, flat bow on these shackles prevents slings from folding or bunching.
    Warning: Not for overhead lifting.
    Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.
    For Web
    Wd.
    Thk.
    Opening
    Wd.
    Pin
    Dia.
    Inside
    Lg.
    Inside
    Wd.
    Wt. Cap.,
    lb.
    Each
    Screw Pin
     
    Highly Corrosion-Resistant 316 Stainless Steel
    1"5/32"5/16"7/32"1 1/8"1"2004038N11000000
     

    Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors.
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.

    Webbing

    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing with Cinching

    Buckle

    Move these anchors between work sites—they loop around beams, rails, and other approved structures. They’re quick to install and don’t require any tools. Plus, they won’t damage your anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Cinching Buckle—Anchors with a cinching buckle, also known as boom straps, are designed to be attached to the arm of a bucket truck. Tighten them for a snug, nonslip fit.
    Nylon Liner—Webbing anchors with a nylon liner have an extra layer to protect the webbing from wear and tear.
    Lg.,
    ft.
    Material
    Liner
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    3Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N11000000
    6Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N1200000
    12Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5029707N1300000
     
    Webbing with Cinching Buckle
    4Polyester Fabric—D-Ring5,000350ANSI/ASSP A10.32, ANSI/ASSP Z359.111005T1400000
     

    E-Track Tie-Down Rings

    Image of Product. D-Ring with Webbing. Front orientation. Webbing.
    Image of Specification. Front orientation. Contains Border. E-Track D-Rings. E-Track Tie-Down Rings.

    D-Ring with Webbing

    These rings pivot to let you secure loads in various directions. Use them with track, straps, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
    Warning: Never use for lifting applications.
    Wt. Cap.,
    lb.
    Inner Ring
    Wd.
    Projection
    Webbing
    Material
    End Fitting
    Material
    Each
    D-Ring with Webbing
    1,0002"6"Polyester FabricZinc-Plated Steel88525T1600000
     

    Tool Tether Anchors

    Image of ProductInUse. Front orientation. Tool Tether Anchors. Slide On.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound.
    Image of ProductInUse. Front orientation. Tool Tether Anchors. Wraparound with Extra-Wide D-Ring.

    Slide On

    Wraparound

    Wraparound

    with

    Extra-Wide

    D-Ring

    Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.
    Slide On—Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.
    Wraparound—Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down.
    Wraparound with Extra-Wide D-Ring—Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards.
    Nylon Cover—A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.
    ANSI/ISEA 121—To ensure safety, they meet ANSI/ISEA 121 for design and performance.
    Wt. Cap.,
    lb.
    For No.
    of Tools
    Connection
    Hardware
    Material
    Cover
    Material
    Construction
    For Max.
    Dia.
    Specs. Met
    Each
    Slide On
    151D-RingNylon
    		—Webbing2 1/2"ANSI/ISEA 1219865N1100000
     
    Wraparound
    251D-RingPolyester Plastic—Webbing6"ANSI/ISEA 1219865N1300000
     
    Wraparound with Extra-Wide D-Ring
    505D-RingNylon
    		Nylon
    		Webbing6"ANSI/ISEA 1219865N1200000
     

    Web Sling Hooks—For Lifting

    Image of Product. Front orientation. Contains Annotated. Hooks. Web Sling, Eye, For Lifting, Closed Eye.
    Image of Product. Front orientation. Contains Annotated. Hooks. Web Sling, Eye, For Lifting, Open Eye.

    Closed Eye

    Open Eye

    The flat eye on these hooks keeps webbing and strapping flat, so it doesn’t bunch. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.
    Note: Capacities are for vertical lifting only.
    Open Eye—Open-eye hooks are easier to attach to webbing. Slip webbing through the latch and into the eye.
    Hooks
    Latches
    Hook
    For Web
    Wd.
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Usable
    Lg.
    Color
    Fabrication
    Latch
    Type
    Max. Temp.,
    ° F
    Specs. Met
    Each
    Each
    Powder-Coated Alloy Steel
     
    Closed Eye
    1 1/2"3,00031/32"3 15/16"OrangeForgedSpring400ASME B30.104086N110000004086N14000000
    2 1/2"6,0001 3/16"5 1/4"OrangeForgedSpring400ASME B30.104086N120000032805T41400000
    4"10,0001 15/32"7"OrangeForgedSpring400ASME B30.104086N13000004086N1500000
     
    Open Eye
    1 1/2"2,6001 3/16"3 1/2"PurpleForgedSpring400ASME B30.104086N16000004086N2100000
    1 7/8"5,3001 15/16"4 9/16"GreenForgedSpring400ASME B30.104086N17000004086N2200000
    2 3/8"8,4002 9/16"5 3/8"YellowForgedSpring400ASME B30.104086N180000001771N12200000
    2 5/8"13,2002 21/32"6 1/8"RedForgedSpring400ASME B30.104086N190000001771N12200000
     
    back to top