ASME B30.20 Plate Clamps

Filter by

Material Position

Horizontal

Vertical

Vertical with 90° Tilt

Vertical with 180° Flip

System of Measurement

Thickness

Weight Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 9,999 lb.

10,000 lb. or greater

Closing Type

Weight Capacity per Pair

Gripping Method

Opening Type

Manual with Lock and Remote Release

Clamp Type

Opening Height

Weight

Eye Movement

Overall Width

Eye Diameter

Overall Height

Material

Export Control Classification Number (ECCN)

EAR99

Application

For Lifting

DFARS Specialty Metals

Height

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Specifications Met

Maximum Hardness

REACH

RoHS

Compliant with Exemptions

Not Compliant

Forward

How can we improve?

133 Products

Vertical-Lift with 180° Flip Plate Clamps


A	B	C	D

E	F	G	H

J

Take the strain out of manually standing up stacked plates before lifting them—these clamps have a full 180° range of motion. They can raise the plate from stacked to standing, then lift it vertically, so you can move the plate where you need it. When you're ready to put the plate down again, they can place it on its opposite side.

To make sure the grip is secure for safe lifting, only use these clamps within their weight capacity range.

Warning: Never use to lift people or items over people.

Automatic Close and Manual Open—Automatic close and manual open are quick and easy to use because they don’t have a locking mechanism, but they are less secure than clamps with a lock. These clamps close under their own weight—as the load increases, so does the grip. To open, first set your plate down. Then, press down on the shackle until the cam retracts and remove the plate.

Automatic Close with Lock and Automatic Open with Lock—Automatic close with lock and automatic open with lock are more secure than clamps without a lock. They close under their own weight—as the load increases, so does the grip. These clamps must be unlocked before they will automatically open and release the plate.

Manual Close and Manual Open—Manual close and manual open use a screw to grip the plate, so you can fit a range of plate thicknesses. As the load gets heavier, the bite of the cam increases, which gives the clamp a secure grip on the plate. To open, first set your plate down. Then, press down on the shackle until the cam retracts and remove the plate.

Style A—Style A have wear indicator grooves that let you know when the cam should be replaced—if any teeth are flattened, chipped, or dulled between the grooves, it’s time to swap it out.

Style B—Style B can lift I-beams.

Style C—Style C come with a two-leg sling to lift large or flexible plates.

45° Pivot and 90° Pivot—Pivoting clamps safely lift vertical loads at an angle. Also known as sideloading clamps, they are more flexible than rigid clamps. Use them individually or in pairs with a two-leg sling (not included) to lift longer plates.

Rigid—Rigid clamps lift vertical plates straight up and down but lose their grip when angled. Make sure your plate is fully vertical, and the bottom edge is resting on the ground, before lifting.

	Clamps																Replacement Grippers			Replacement Lifting Eyes
			For Thk.				Overall		Eye
	Style	Wt. Cap., lb.	Min.	Max.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Lg.	Wd.	Movement	For Max. Hardness	Specs. Met		Each		Each	Pair		Each
Automatic Close and Manual Open



		A	100 to 1,000	1/16"	5/8"	Teeth	2 3/16"	4"	9 1/2"	—	2 3/4"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T32	0000000	8857T26	0000000	0	8857T19	0000000


		A	200 to 2,000	1/16"	3/4"	Teeth	3 1/16"	4 3/4"	11 1/4"	—	3 1/16"	2 1/16"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T33	000000	8857T27	000000	0	8857T23	000000
		A	200 to 2,000	3/4"	1 3/8"	Teeth	3 5/8"	5 7/8"	11 1/4"	—	3 1/16"	2 1/16"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T114	00000000	8857T27	000000	0	8857T23	000000
		A	600 to 6,000	1/16"	1"	Teeth	3 9/16"	6"	14"	—	3 13/16"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T35	00000000	8857T28	000000	0	8857T25	000000
		B	100 to 1,000	1/16"	5/8"	Teeth	2 1/8"	4"	9 1/2"	—	2 5/8"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T18	000000	8857T26	000000	0	8857T19	000000
		B	200 to 2,000	1/16"	3/4"	Teeth	2 5/8"	4 3/4"	11 5/16"	—	3 1/16"	2 1/16"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T58	000000	8857T27	000000	0	8857T23	000000
		B	400 to 4,000	1/16"	7/8"	Teeth	3 9/16"	5 1/8"	12 1/8"	—	3 5/16"	2 1/4"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T111	00000000	8857T112	000000	0	8857T113	000000
		B	600 to 6,000	1/16"	1"	Teeth	3 7/16"	6"	15 1/16"	—	3 13/16"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T59	00000000	8857T28	000000	0	8857T25	000000
		C	100 to 1,000	1/16"	5/8"	Teeth	2 7/8"	4"	7 1/2"	—	6"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T21	00000000	8857T26	000000	0	———	0
		C	200 to 2,000	1/16"	3/4"	Teeth	3 5/8"	4 3/4"	9 1/4"	—	6"	3"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T22	00000000	8857T27	000000	0	8857T67	000000


		Automatic Close with Lock and Automatic Open with Lock



				D	100 to 1,000	—	1 3/8"	Teeth	2 3/4"	5 7/8"	11 1/2"	2 1/4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T57	000000	8845T308	000000	0	8845T301	000000


				D	200 to 2,000	—	1 3/8"	Teeth	2 3/4"	5 7/8"	11 1/2"	2 1/4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T56	000000	8845T308	000000	0	8845T301	000000
				D	400 to 4,000	—	1 5/8"	Teeth	4 1/8"	8 3/8"	15 1/4"	3"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T55	00000000	8845T334	0	0000000	8845T315	000000
				D	800 to 8,000	—	2 1/8"	Teeth	4 5/8"	10"	19"	3 1/2"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8845T58	00000000	8845T335	0	000000	8845T316	000000
				D	1,200 to 12,000	—	2 1/8"	Teeth	4 5/8"	10"	19"	3 1/2"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8857T122	00000000	8845T335	0	000000	8845T316	000000
				D	2,000 to 20,000	—	2 5/8"	Teeth	5 3/8"	11 1/8"	22 1/4"	4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8857T123	00000000	8857T127	0	000000	8857T129	000000
				D	2,400 to 24,000	1/2"	3 1/8"	Teeth	6 1/4"	12 1/2"	25 3/8"	4"	—	—	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8857T124	00000000	8857T128	0	000000	8857T131	000000
				E	100 to 1,000	—	1 3/8"	Teeth	2 3/4"	5 7/8"	13"	2 1/4"	—	—	90° Pivot	Brinell 450, Rockwell C47	ASME B30.20	8857T125	000000	8845T308	000000	0	8845T301	000000
				E	600 to 6,000	—	1 5/8"	Teeth	4 1/8"	8 3/8"	17 3/8"	1 5/8"	—	—	90° Pivot	Brinell 450, Rockwell C47	ASME B30.20	8857T126	00000000	8845T334	0	000000	8845T315	000000
				F	200 to 2,000	—	3/4"	Teeth	1 3/4"	5"	8 1/2"	1 9/16"	—	—	Rigid	Brinell 345, Rockwell C37	ASME B30.20	8845T72	000000	8845T506	000000	0	8845T521	000000
				F	400 to 4,000	—	1 3/8"	Teeth	3 1/16"	7 1/2"	13"	2 3/4"	—	—	Rigid	Brinell 345, Rockwell C37	ASME B30.20	8845T73	00000000	8845T515	000000	0	8845T522	000000


				G	200 to 2,000	—	3/4"	Teeth	1 3/4"	5"	8 3/4"	1 9/16"	—	—	45° Pivot	Brinell 345, Rockwell C37	ASME B30.20	8845T74	00000000	8845T506	000000	0	8845T521	000000
				G	400 to 4,000	—	3/4"	Teeth	3 1/16"	7 1/2"	14 1/2"	2 3/4"	—	—	45° Pivot	Brinell 345, Rockwell C37	ASME B30.20	8857T132	00000000	———	0	0	———	0
				H	2,700 to 13,200	—	2"	Teeth	5 5/8"	11 1/2"	29"	—	6 15/16"	3 3/4"	90° Pivot	Brinell 300, Rockwell C32	ASME B30.20	8857T133	00000000	———	0	0	———	0


				Manual Close and Manual Open



						J	200 to 2,000	1/16"	1"	Screw	2 1/4"	5 3/8"	7 7/8"	—	2 7/8"	1 3/4"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	3700T11	000000	3700T36	000000	0	———	0


						J	600 to 6,000	1/16"	2"	Screw	3 3/4"	7 7/8"	10 5/8"	—	3 3/8"	1 7/8"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	3700T12	00000000	3700T37	000000	0	———	0
						J	1,200 to 12,000	1/16"	3"	Screw	4 1/2"	10"	14 3/8"	—	4 1/2"	3 3/8"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	3700T14	00000000	3700T38	000000	0	———	0

Plate Clamp Repair Kits

		Each
Repair Kit for Style D 1,000 to 2,000-lb. Capacity Clamps (Includes Bolt, Gripper, Nut, Pins, Spring)	8845T611	0000000
Repair Kit for Style D 4,000-lb. Capacity Clamps (Includes Bolt, Gripper, Nut, Pins, Spring)	8845T612	000000
Repair Kit for Style D 8,000-lb. Capacity Clamps (Includes Bolt, Gripper, Nut, Pins, Spring)	8845T613	000000

Horizontal-Lift Plate Clamps


	Automatic Close	Manual Close with Lock


Teeth Grip	Smooth Grip

Use in pairs with a two-leg sling (not included) to transfer metal plates in a horizontal position. Unlike other plate-lifting clamps, these can pick up multiple plates at the same time.

Warning: Never use to lift people or items over people.

Automatic Close and Manual Open—Automatic-close clamps close under their own weight; as the load increases, so does the grip.

Manual Close with Lock—Manual-close clamps have a locking mechanism to keep them open for easy loading or closed to prevent accidental release.

Smooth Grip—Clamps with a smooth grip won't damage surfaces, so they're ideal for handling soft and delicate materials.

					Overall		Eye
	Wt. Cap. per Pair, lb.	For Max. Thk.	Gripping Method	Grip Type	Wd.	Ht.	Dia.	Movement	For Max. Hardness	Specs. Met		Pair
Automatic Close and Manual Open



		1,000	1"	—	Smooth	6 1/8"	6 1/2"	1 1/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T11	0000000


		1,000	1"	Teeth	—	6 1/8"	6 1/2"	1 1/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T2	000000
		2,000	2 1/2"	—	Smooth	8"	11"	1 1/2"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T12	000000
		2,000	2 1/2"	Teeth	—	8"	11"	1 1/2"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T3	000000
		6,000	2 1/2"	Teeth	—	8 5/16"	11 1/2"	1 1/2"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T5	000000
		16,000	3"	Teeth	—	10 7/8"	15"	1 3/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T6	00000000


		Manual Close with Lock and Manual Open with Lock



				4,000	1"	Teeth	—	8 3/8"	11 3/4"	2 1/4"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T81	00000000


				8,000	1 1/2"	Teeth	—	9 1/2"	15 3/8"	3"	Rigid	Brinell 450, Rockwell C47	ASME B30.20	8955T82	00000000

Vertical-Lift Plate Clamps


B	C	Vertical Material Position

Use these clamps to raise a metal plate straight up from its original vertical position.

Warning: Never use to lift people or items over people.

Automatic Close with Lock— Automatic close clamps close under their own weight; as the load increases, so does the grip. Clamps with a lock stay closed to prevent accidental release.

Manual Open with Lock and Remote Release—Manual open with lock and remote release clamps have a pull chain so you can open them remotely when they are not under load. They lock when open for easy loading.

Screw Grip—Clamps with screw grip are not for use on hardened alloy plates.

	Clamps															Replacement Grippers
						Overall		Eye
	Style	Wt. Cap., lb.	For Max. Thk.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Lg.	Wd.	Movement	For Max. Hardness	Specs. Met		Each		Each
Automatic Close with Lock and Manual Open with Lock and Remote Release



		B	1,000	3/4"	Teeth	2 13/16"	4 5/8"	11 1/4"	2 3/8"	—	—	Rigid	Brinell 300, Rockwell C33	ASME B30.20	3352T19	0000000	3352T33	0000000


		B	2,000	3/4"	Teeth	3 3/16"	5 7/8"	13 3/4"	2 5/8"	—	—	Rigid	Brinell 300, Rockwell C33	ASME B30.20	3352T21	000000	3352T34	000000
		B	4,000	1"	Teeth	3 1/2"	6 3/4"	16 3/8"	3 5/8"	—	—	Rigid	Brinell 300, Rockwell C33	ASME B30.20	3352T22	00000000	3352T35	000000


		Manual Close and Manual Open



				C	5,000	1"	Screw	4"	5 1/2"	14 1/2"	—	6"	2 1/2"	Rigid	Brinell 300, Rockwell C32	ASME B30.20	3357T1	000000	3357T11	000000


				C	5,000	2"	Screw	4"	7 1/2"	14 1/2"	—	6"	2 1/2"	Rigid	Brinell 300, Rockwell C32	ASME B30.20	3357T3	000000	3357T13	000000

Vertical-Lift with 90° Tilt Plate Clamps


Automatic Close	Automatic Close with Lock

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° so it can be lifted in a vertical position. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Warning: Never use to lift people or items over people.

Automatic Close and Manual Open—Automatic close clamps close under their own weight; as the load increases, so does the grip.

Automatic Close with Lock—Automatic close clamps close under their own weight; as the load increases, so does the grip. Clamps with a lock stay closed to prevent accidental release.

Manual Open with Lock and Remote Release—Manual open with lock and remote release clamps have a pull chain so they can open remotely when they are not under load. They lock when open for easy loading.

	Clamps														Replacement Grippers		Replacement Lifting Eyes
		For Thk.				Overall		Eye
	Wt. Cap., lb.	Min.	Max.	Gripping Method	Opening Ht.	Wd.	Ht.	Lg.	Wd.	Movement	For Max. Hardness	Specs. Met		Each		Each		Each
Automatic Close and Manual Open



		1,100	1/16"	5/8"	Teeth	2 3/16"	4"	11 13/16"	2 3/4"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T62	0000000	8857T26	0000000	8857T19	0000000


		Automatic Close with Lock and Manual Open with Lock and Remote Release



				6,600	1/16"	1 1/4"	Teeth	4 3/8"	7 1/4"	14 3/8"	3 1/2"	2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T14	00000000	8857T51	000000	———	0


				11,000	1/16"	1 1/2"	Teeth	5"	8 7/8"	16"	3 1/2"	2 1/2"	Rigid	Brinell 400, Rockwell C43	ASME B30.20	8857T15	00000000	8857T52	000000	———	0

Nonmarring Vertical-Lift with 180° Flip Plate Clamps

Pads on these clamps prevent the grip from biting into the load. They can take a metal plate of any hardness that is stacked horizontally, lift it vertically, and then place it down horizontally on its other side. Clamps close under their own weight; as the load increases, so does the grip. The lock keeps them closed to prevent accidental release. Clamps automatically open and lock when they are not under load so a new plate can be easily inserted. They have an eye that pivots to allow lifting angles up to 15° without reducing the capacity. The eye adjusts to accommodate unbalanced loads.

Warning: Never use to lift people or items over people.

	Clamps											Replacement Grippers
					Overall		Eye
	Wt. Cap., lb.	For Max. Thk.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Movement	Specs. Met		Each		Each
Automatic Close with Lock and Automatic Open with Lock



		1,100	3/8"	Pad	3 1/4"	5"	10"	1 9/16"	15° Pivot	ASME B30.20	8804T51	000000000	8845T372	0000000


		2,200	3/4"	Pad	4 5/16"	7 1/4"	12 1/8"	1 3/16"	15° Pivot	ASME B30.20	8804T52	00000000	8845T371	000000

Nonmarring Vertical-Lift Plate Clamps


Manual Lock	Automatic Lock	Vertical Material Position

Pads on these clamps stop the grip from biting into the load. Use them to raise a metal plate of any hardness straight up from its original vertical position. Clamps close automatically under their own weight; as the load increases, so does the grip. They open automatically when they are not under load, so you can insert a new plate. All clamps have a lock to prevent accidental release. They rotate 360°, so you can easily position your load where you need to.

To make sure the grip is secure for safe lifting, only use these clamps within their capacity.

Warning: Never use to lift people or items over people.

Manual Lock—Clamps with manual lock secure to a load when you latch them.

Automatic Lock—Clamps with automatic lock secure automatically when positioned around a load. They’re quicker to use than clamps with an automatic lock.

	Clamps												Replacement Grippers
		For Thk.				Overall		Eye
	Wt. Cap., lb.	Min.	Max.	Gripping Method	Opening Ht.	Wd.	Ht.	Dia.	Movement	Specs. Met		Each		Each
Automatic Close with Manual Lock and Automatic Open with Manual Lock



		110 to 2,860	3/8"	1 15/16"	Pad	8 1/2"	7 1/8"	14 1/8"	1"	Rigid	ASME B30.20	8804T55	0000000	8804T74	0000000


		110 to 3,300	1 3/16"	2 15/16"	Pad	10 1/4"	8 1/2"	15 7/8"	1"	Rigid	ASME B30.20	8804T56	00000000	8804T75	000000


		Automatic Close with Automatic Lock and Automatic Open with Automatic Lock



				110 to 2,860	3/16"	1 9/16"	Pad	9 1/8"	6 3/4"	15 1/8"	13/16"	Rigid	ASME B30.20	8804T111	000000	8804T113	000000


				110 to 3,300	13/16"	2 3/8"	Pad	10 3/8"	8 1/8"	16 3/4"	13/16"	Rigid	ASME B30.20	8804T112	00000000	8804T114	000000

Switch-Off Lifting Magnets


Style A	Style B	Style C	Style D

Style E	Replacement Handle for Style A	Replacement Handle for Style B	Replacement Handle for Style C

Also known as permanent lifting magnets, these magnets have an on/off handle to engage and release the magnet. All can lock in the on position to prevent accidental release. All except Style C can also lock in the off position. Use the lifting eye for attaching a hook or sling. All can lift both flat and cylindrical objects.

Note: If used on dirty, oily, thin, or curved surfaces, the capacities will be reduced. Do not use on metal that flexes.

Warning: Never use to lift people or items over people.

Style A


	Replacement Handle for Style A

Styles A have a V-groove for lifting pipes, tubes, and rods by their rounded side.

	Magnets													Replacement Handles
	Horiz. Lift Cap. @ Material Thk.	Wt. Cap. @ Dia.	Max. Material Lg. @ Material Thk.	Lg.	Wd.	Ht.	Lifting Eye Ht.	Handle Lg.	Max. Temp., ° F	Includes	Specs. Met		Each		Each
Steel



		180 lb. @ 1/4" 250 lb. @ 1/2" 250 lb. @ 1"	120 lb. @ 2"	6 ft. @ 1/4" 8 ft. @ 1/2" 10 ft. @ 1"	4 1/2"	2 1/2"	5"	1 3/8"	4"	180	Proof Test Certificate	ASME B30.20	3384T79	0000000	3384T64	000000


		270 lb. @ 1/4" 600 lb. @ 1/2" 800 lb. @ 1"	400 lb. @ 3"	6 ft. @ 1/4" 8 ft. @ 1/2" 10 ft. @ 1"	7 3/4"	3 1/2"	8 3/4"	2 3/8"	8"	180	Proof Test Certificate	ASME B30.20	3384T75	000000	3384T65	000000
		550 lb. @ 1/4" 1,200 lb. @ 1/2" 2,600 lb. @ 1" 4,400 lb. @ 2"	1,750 lb. @ 3"	2 ft. @ 1/4" 4 ft. @ 1/2" 7 ft. @ 1" 10 ft. @ 2"	20 3/8"	6 1/2"	11"	3 5/8"	16 1/2"	175	Proof Test Certificate	ASME B30.20	3384T107	00000000	———	0
		800 lb. @ 1/2" 1,600 lb. @ 1"	800 lb. @ 4"	8 ft. @ 1/2" 10 ft. @ 1"	10 3/4"	4 3/4"	8 3/4"	3 1/2"	9"	180	Proof Test Certificate	ASME B30.20	3384T76	00000000	3384T66	000000
		1,450 lb. @ 1" 2,500 lb. @ 2"	1,250 lb. @ 5"	10 ft. @ 1" 10 ft. @ 2"	12 1/2"	7"	8 3/4"	4 3/4"	10 3/4"	180	Proof Test Certificate	ASME B30.20	3384T77	00000000	3384T67	000000
		2,600 lb. @ 2" 5,000 lb. @ 3"	2,500 lb. @ 14"	10 ft. @ 2" 10 ft. @ 3"	16 3/4"	9 1/4"	16 3/4"	6"	14 3/4"	180	Proof Test Certificate	ASME B30.20	3384T61	00000000	3384T68	000000

Style B


	Replacement Handle for Style B	Replacement Eyes

Style B have a V-groove for lifting pipes, tubes, and rods by their rounded side. They include a detachable vertical lifting eye that mounts to the side of the magnet to lift plates vertically.

	Magnets															Replacement Handles		Replacement Eyes
	Lift Cap. @ Material Thk.
	Horizontal	Vertical	Wt. Cap. @ Dia.	Max. Material Lg. @ Material Thk.	Lg.	Wd.	Ht.	Lifting Eye Ht.	Handle Lg.	Max. Temp., ° F	Includes	Features	Specs. Met		Each		Each		Each
Steel



		670 lb. @ 1/2" 1,000 lb. @ 1"	250 lb. @ 1"	1,000 lb. @ 2"	8 ft. @ 1/2" 10 ft. @ 1"	16 9/16"	5 7/16"	8"	1 13/16"	10 1/8"	180	Proof Test Certificate	Detachable Vertical Lifting Eye	ASME B30.20	3384T22	000000000	3384T23	0000000	3384T24	0000000

Style C


	Replacement Handle for Style C

Style C have a V-groove for lifting pipes, tubes, and rods by their rounded side. They have a pivoting lifting eye for both horizontal and vertical lifting.

	Magnets															Replacement Handles
	Lift Cap. @ Material Thk.
	Horizontal	Vertical	Wt. Cap. @ Dia.	Max. Material Lg. @ Material Thk.	Lg.	Wd.	Ht.	Lifting Eye Ht.	Handle Lg.	Max. Temp., ° F	Includes	Features	Specs. Met		Each		Each
Steel



		150 lb. @ 1/4" 150 lb. @ 1/2" 150 lb. @ 1"	40 lb. @ 1/4"	75 lb. @ 2"	6 ft. @ 1/4" 8 ft. @ 1/2" 10 ft. @ 1"	5"	2 1/2"	10"	2 1/4"	2 1/2"	180	Proof Test Certificate	Pivoting Lifting Eye	ASME B30.20	3384T63	0000000	3384T71	000000


		270 lb. @ 1/4" 330 lb. @ 1/2" 330 lb. @ 1"	75 lb. @ 3/8"	160 lb. @ 4"	6 ft. @ 1/4" 8 ft. @ 1/2" 10 ft. @ 1"	6 1/2"	4"	9 1/4"	2 1/4"	2 1/2"	180	Proof Test Certificate	Pivoting Lifting Eye	ASME B30.20	3384T83	000000	3384T72	00000

Style D

Style D magnets have a deeper V-groove base than the other styles, so they make more surface contact with round items for a more secure lift.

	Wt. Cap. @ Dia.	Max. Material Lg. @ Material Thk.	Lg.	Wd.	Ht.	Lifting Eye Ht.	Handle Lg.	Max. Temp., ° F	Includes	Specs. Met		Each
Steel



	150 lb. @ 1/4" 400 lb. @ 1/2" 660 lb. @ 3/4"	330 lb. @ 3"	1 ft. @ 1/4" 3 ft. @ 1/2" 5 ft. @ 3/4"	7"	4 7/8"	7 1/2"	2 9/16"	6 1/2"	175	Proof Test Certificate	ASME B30.20	3384T108	0000000


	230 lb. @ 1/4" 470 lb. @ 1/2" 1,300 lb. @ 1"	660 lb. @ 3"	1 ft. @ 1/4" 3 ft. @ 1/2" 6 ft. @ 1"	11 3/16"	7 5/8"	8"	2 9/16"	6 1/2"	175	Proof Test Certificate	ASME B30.20	3384T109	00000000
	250 lb. @ 1/4" 700 lb. @ 1/2" 1,800 lb. @ 1" 2,600 lb. @ 1 1/2"	1,100 lb. @ 4"	1 ft. @ 1/4" 3 ft. @ 1/2" 6 ft. @ 1" 10 ft. @ 1 1/2"	13 9/16"	11"	11 3/4"	3 5/8"	9 3/8"	175	Proof Test Certificate	ASME B30.20	3384T111	00000000

Style E

Style E magnets are round to lift cylindrical objects by their flat top. They’re often used with rings, bearing housings, and flange plates. They lift cylindrical objects more efficiently than rectangular magnets and also release objects more smoothly and safely when switched off.

	Max. Material Dia. @ Material Thk.	Dia.	Ht.	Lifting Eye Ht.	Handle Lg.	Max. Temp., ° F	Includes	Specs. Met		Each
Steel



	220 lb. @ 1/4" 380 lb. @ 1/2" 380 lb. @ 1"	6 ft. @ 1/4" 8 ft. @ 1/2" 8 ft. @ 3/4" 10 ft. @ 1"	4 3/4"	10"	2 1/16"	7 1/2"	180	Proof Test Certificate	ASME B30.20	3384T101	000000000


	260 lb. @ 1/4" 550 lb. @ 1" 550 lb. @ 1/2"	6 ft. @ 1/4" 8 ft. @ 1/2" 10 ft. @ 1"	6 5/16"	10 3/4"	2 7/16"	7 1/2"	180	Proof Test Certificate	ASME B30.20	3384T102	00000000

Plate-Lifting Hooks—For Lifting


Shown with Chain Sling (Not Included)

Lift thick plates or multiple sheets without scratching them. These hooks don’t have teeth that will bite into your material. However, because they don’t clamp in place, they’re more difficult to position before lifting. Attach them to a crane or hoist using a chain assembly to lift heavy, flat materials such as steel plates.

Use the included safety-pin shackle to connect these hooks to a chain sling. The chain sling must be rigged at a minimum horizontal angle of 45°.

Warning: Never use to lift people or items over people.

	Hooks														Replacement Safety Cotter-Pin Shackles
				Hook			Eye
	For Straight-Link Chain Trade Size	Wt. Cap., lb.	Safety Factor	Opening Wd.	Lg.	Wd.	ID	Thk.	Fabrication	Max. Temp., ° F	Specs. Met	Includes		Each		Each
For Grade 100 Chain







				Red Powder-Coated Alloy Steel

				9/32"	4,300	5:1	2"	1 3/4"	2 1/2"	1 5/16"	1/2"	Heat Treated	400	ASME B30.20	Shackle	8865N101	0000000	8966T51	000000


				3/8"	8,800	5:1	2 5/8"	3"	3"	1 11/16"	11/16"	Heat Treated	400	ASME B30.20	Shackle	8865N102	000000	8966T52	00000
				1/2"	15,000	5:1	3 1/2"	4"	3 1/2"	2 1/4"	1"	Heat Treated	400	ASME B30.20	Shackle	8865N103	000000	8966T54	000000
				5/8"	22,600	5:1	4 3/8"	5"	5"	3"	1 1/4"	Heat Treated	400	ASME B30.20	Shackle	8865N104	00000000	8966T101	000000

Pry-Off Lifting Magnets

Style B

Also known as permanent lifting magnets, these magnets hold a load until you pull the handle and pry the magnet off. They have a lifting eye for attaching a hook or sling.

Note: Capacities listed are based on lifting flat metal that has a clean, smooth surface. If used on dirty, oily, thin, or curved surfaces, the capacities will be reduced.

Warning: Never use to lift people or items over people.

Style B—Style B magnets have a nonmarring roller release that prevents scraping and gouging the load as it is released.

	Horiz. Lift Cap. @ Material Thk.	Max. Material Lg. @ Material Thk.	Lg.	Wd.	Ht.	Lifting Eye Ht.	Handle Lg.	Material	Material Position	Max. Temp., ° F	Includes	Specs. Met		Each
Pry-Off Handle with Nonmarring Roller



	B	400 lb. @ 1/4" 400 lb. @ 1" 400 lb. @ 2"	6 ft. @ 1/4" 10 ft. @ 1" 10 ft. @ 2"	7 3/4"	7 1/4"	6 3/4"	2 7/8"	16"	Stainless Steel	Horizontal	300	Proof Test Certificate	ASME B30.20	3292T71	0000000


	B	900 lb. @ 1/4" 1,000 lb. @ 1" 1,000 lb. @ 2"	6 ft. @ 1/4" 10 ft. @ 1" 10 ft. @ 2"	10 3/4"	7 1/4"	6 3/4"	2 7/8"	16"	Stainless Steel	Horizontal	300	Proof Test Certificate	ASME B30.20	3292T72	000000
	B	1,000 lb. @ 1/4" 1,500 lb. @ 1" 1,500 lb. @ 2"	6 ft. @ 1/4" 10 ft. @ 1" 10 ft. @ 2"	14 3/4"	7 1/4"	6 3/4"	2 7/8"	16"	Stainless Steel	Horizontal	300	Proof Test Certificate	ASME B30.20	3292T73	000000
	B	1,100 lb. @ 1/4" 3,000 lb. @ 1" 3,000 lb. @ 2"	6 ft. @ 1/4" 10 ft. @ 1" 10 ft. @ 2"	19 1/4"	10 1/2"	7"	2 7/8"	16"	Stainless Steel	Horizontal	300	Proof Test Certificate	ASME B30.20	3292T74	00000000

Battery-Powered Lifting Magnets

Keep a safe distance from heavy loads—these lifters automatically engage when set down, so you don’t have to secure the magnet to the load yourself. When these lifting magnets sense they’ve been set down again, they’ll automatically release the load. Alternatively, use the push buttons to manually turn the magnet on and off. As a fail-safe, the magnet stays engaged even if the battery dies, preventing your load from dropping. Pair these lifters with a crane or hoist. They’re often used to move large metal sheets and pipes but can also be used to position loads when grinding or fixturing metal parts together.

You can adjust the magnet’s strength to protect thin materials from damage. Fine-tuning the strength is also useful for lifting just one sheet off a stack at a time.

Warning: Never use to lift people or items over people.

Remote Control—Lifters with a remote control give you a way to manually turn the magnet on or off from a distance.

	Wt. Cap. @ Dia.	Max. Material Lg. @ Material Thk.	Lg.	Wd.	Ht.	Lifting Eye Ht.	Material	Material Position	Max. Temp., ° F	Batteries Included	Battery Charger Included	Includes	Features	Specs. Met		Each
Push Button



	154 lb. @ 1/4" 297 lb. @ 1/2" 440 lb. @ 1"	110 lb. @ 5.906"	5 ft. @ 1"	5 15/16"	5 5/16"	11 3/4"	2 7/8"	Steel	Horizontal	175	Yes	Yes	—	Fail-Safe Operation	ASME B30.20	9162N11	000000000


	231 lb. @ 1/4" 518 lb. @ 1/2" 981 lb. @ 1" 1,102 lb. @ 2"	440 lb. @ 7.874"	8 ft. @ 2"	7 7/8"	10 3/8"	15"	3 3/4"	Steel	Horizontal	175	Yes	Yes	Remote Control	Fail-Safe Operation	ASME B30.20	9162N12	00000000
	418 lb. @ 1/4" 837 lb. @ 1/2" 2,017 lb. @ 1" 2,094 lb. @ 2"	880 lb. @ 7.874"	8 ft. @ 2"	14"	10 9/16"	15"	3 3/4"	Steel	Horizontal	175	Yes	Yes	Remote Control	Fail-Safe Operation	ASME B30.20	9162N13	00000000

Vacuum Lifters for Large Panels

Lift and position windows, large metal sheets, and even solar panels scratch free. These lifters connect to a crane or hoist and use suction cups to grip material. This makes them more gentle than tongs or plate clamps that can scratch delicate surfaces. For precise positioning, you can tilt these lifters up to 90° and rotate them 180°. As you rotate them, you can lock them at 45° increments. To prevent shifting during installation, they’ll automatically lock at 90°.

The battery-powered vacuum pump generates and maintains strong suction. If suction is lost, the pump senses it and automatically reactivates to maintain grip. A vacuum gauge lets you monitor pressure to stay within safe operating limits. If the pump runs out of battery during a lift, these lifters have a vacuum reserve tank that allows them to maintain grip and support the load for at least five minutes. Each lifter includes a battery gauge and a charger.

Warning: Never use to lift people or items over people.

Lifters with Rubber Cups

						Cup				Overall		Lifting Eye			Mounting Holes						Temp., ° F
	Wt. Cap., lb.	For Surface Type	For Use With	Max. Tilt Angle	Movement	No. of	Color	Dia.	Ht.	Ht.	Wd.	Lg.	Wd.	Housing Material	No. of	Thread Size	Thread Type	Battery Type	Batteries Included	Wt., lb.	Min.	Max.	Specs. Met	Charger Connection		Each
Flat Cup—For Smooth Surfaces



		700	Flat, Nonporous	Sheet Metal, Plastic, Ceramic Tiles, Glass	90°	180° Pivot	4	Black	12"	0.98"	37 1/2"	51 3/4"	2 7/8"	3"	Steel	6	1/4"-20	UNC	Rechargeable	Yes	90	32	100	ASME B30.20	Straight Blade	9972N101	000000000

Cups


For Smooth Surfaces For Textured Surfaces	For Smooth Surfaces

Cups—Vacuum cups for smooth and textured surfaces will grip stone slabs, pebbled fiberglass, and textured tiles. They have a sealing ring that resists abrasive particles. Keep in mind, they have a lower lifting capacity than vacuum cups designed for smooth surfaces only.

					Cup				Temp., ° F		Each		Package
	For Surface Texture	Wt. Cap., lb.	For Surface Type	For Use With	Color	Dia.	Ht.	Compressed Cup Ht.	Min.	Max.		Each	Pkg. Qty.		Pkg.
Rubber Cup



		Smooth, Textured	150	Flat, Nonporous	Glass, Sheet Metal, Plastic, Ceramic Tiles, Stone	Black	11 3/4"	1.180"	0.790"	32	100	9972N102	0000000	4	9972N103	0000000


		Smooth	175	Flat, Nonporous	Glass, Sheet Metal, Plastic, Ceramic Tiles	Black	12"	0.980"	0.830"	32	100	9972N104	000000	—	———	0