Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable. Also known as metal clad (MC) cable, the metal armor acts as a conduit to protect the wires inside. The PVC inner insulation resists flames. Its nylon jacket is low smoke, so it can be used without conduit in duct work, under raised floors, and above a drop ceiling. This cable has a ground wire that is not counted in the number of wires.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it’s rated for your environment.

Shielded cable has a layer of foil that blocks signal interference from nearby equipment and devices.

For technical drawings and 3-D models, click on a part number.

Wire multiple components in your security system using a single cable. This cable bundles together four color-coded cables that correspond to each part of an access point: the card reader, the door contact, the lock, and the exit sign. Each interior cable is labeled with the component it matches. All four interior cables have a layer of foil around them to prevent signal interference from nearby devices. Designated CMP, it has a flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling. It’s also known as plenum cable. It’s rated FT6, so it meets requirements for preventing the spread of flames and smoke based on a timed test with material mounted to a horizontal tray.

For technical drawings and 3-D models, click on a part number.

Also known as plenum cable, this CMP cable has flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling. Use it to send data between computers, printers, servers, and switches in an office. It’s backward compatible so it works in networks that meet the same or a lower category. Choose cable with a higher ethernet cable category for a clearer signal.

Use unshielded cable in applications where signal interference is not a concern.

Shielded cable has a layer of foil that blocks signal interference from nearby equipment and devices. It has an uninsulated ground wire that is not counted in the number of wires.

Also known as plenum cable, this cable is designated CMP, so it has low-smoke insulation and can be used without conduit in duct work and above a drop ceiling. The oil-resistant FEP insulation protects wires as the cable moves from duct to equipment or machinery. It also resists UV light. It’s backward compatible so it works in networks that meet the same or a lower category.

Send data between data centers and workstations in fiber-optic networks. The thermoplastic outer insulation on this cable is flame retardant for safe indoor use, and resists water and UV light for outdoor use. Because it works both indoors and outdoors, there’s no need for a transition splice when routing the cable into buildings. Each inner fiber also has a layer of thermoplastic insulation to protect signals and add flexibility. This cable is non-conductive, so grounding or bonding is not required.

Single-mode cable is often used to send data between buildings. It has a small core diameter, which reduces signal loss. It transmits data over longer distances and has a higher bandwidth than multimode cable.

Multimode cable is often used to transmit data over short distances, such as within buildings and local area networks (LANs). It has a large core diameter, so it’s easier to terminate and install than single-mode cable. However, it has lower bandwidth.

ONFP cable is for use in horizontal shafts, such as in ducts and above drop ceilings.

Fiber count refers to the number of optical fibers inside a cable. The higher the count, the more data you can send. You can branch each fiber into its own individual cable if your network demands grow in the future.

For technical drawings and 3-D models, click on a part number.

The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions. It meets Mine Safety and Health Administration (MSHA) standards for material quality.

DLO wire carries higher voltages than SC wire, making it the better choice for heavy duty applications. Use it to run power to motors, cranes, and other equipment in shipyards, mines, and oil- and gas-drilling rigs. Also known as diesel locomotive cable, this wire was originally designed to wire trains. An inner layer of chlorinated polyethylene plastic (CPE) gives it increased resistance to chemicals, heat, and flames. It’s also rated RHW-2, so it can be used underground and in wet locations.

All are flame rated, so they meets requirements for preventing the spread of flames based on a timed test. FT4 wire is mounted to a vertical tray during testing.

For technical drawings and 3-D models, click on a part number.

Run high-definition signals through duct, above drop ceilings, and below raised floors without using conduit. These cords are plenum rated, so their insulation resists fire and doesn’t produce smoke. Connect these cords to monitors, TVs, and projectors. Each end has both an HDMI plug and a micro-HDMI socket, so you can connect multiple devices to the cord at once. The plugs are gold plated to resist corrosion and maintain signals over time.

Note: These cords only transmit signals in one direction. Ends are labeled “Source” or “Display” to help you install the cord.

For technical drawings and 3-D models, click on a part number.