Plumbers' Plugs | McMaster-Carr

Filter by

Pipe Size

Expansion Plug Type

For Pipe ID

Sealing Location

Maximum Air Back Pressure

Plate Material

Deflated Diameter

Overall Height

Seal Material

With Bypass

Maximum Temperature

Plug Connection Method

Pull Through

Push In

Maximum Water Back Pressure

Less than 50 ft. of head

50 ft. of head to 99 ft. of head

100 ft. of head to 199 ft. of head

200 ft. of head to 249 ft. of head

250 ft. of head or greater

Not Rated

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Handle Material

Minimum Temperature

System of Measurement

Inch

Metric

Required Inflation Pressure

Deflated Height

Bypass Pipe Size

Bypass Thread Type

Plate Color

Bypass Connection Port

451 Products

Expansion Plugs

Wing Nut Expansion Plugs

Twist the wing nut on these plugs to expand the seal.

Hex-Nut Expansion Plugs

Tighten the nut on these plugs to expand the seal.

T-Handle Expansion Plugs

Twist the easy-grip T-handle on these plugs to expand the seal.

Square-Head Expansion Plugs

Turn the square head of the plug into the sealing ring to close off pipe openings.

Quick-Snap Expansion Plugs

Turn the cam handle to expand the seal, then snap the handle down to hold it in place.

Quick-Lock Expansion Plugs

Save time sealing off pipe or valve box openings. These plugs install with one quarter turn of the handle, unlike wing nut expansion plugs that require multiple turns.

Expansion Plugs with Bypass

Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing.

Air-Inflatable Plugs

Also known as pneumatic plugs, these plugs conform to wide and out-of-round pipes.

Air- and Water-Inflatable Plugs

Penetrate tight pipe junctures with the most flexible expansion plugs we offer.

Air- and Water-Inflatable Plugs for Wye-Joints

These extra-long plugs allow you to seal off two pipes at the same time. They have two separate inflation chambers to release back pressure gradually and prevent splash back as water clears the drain line.

Air-Inflatable Plugs for Tee Connections

Often used for plumbing tests, these plugs thread into tees and inflate to block flow across the pipe.

Remote-Access Air-Inflatable Plugs

Plug underground sewage lines, water supply lines, and other pipe that’s hard to reach. These plugs connect to a 6-ft. extension pole with an adapter so you can place them in confined spaces from a distance.

Air-Inflatable Plugs with Bypass

Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve back pressure while testing.

Deep-Reach Wing Nut Expansion Plugs

Insert these plugs deep within your pipe to temporarily block off a line. Twist their wing nut to expand the seal.

Deep-Reach Hex Nut Expansion Plugs with Bypass

Use the bypass tube to add air, water, and fluid or relieve back pressure.

Expansion Plugs for Cleanout Tees

Seal cleanout tees when testing your drain, waste, and vent systems for pressure and leaks—no need to inflate these plugs with an air compressor or hand pump.

Expansion Plugs for Conduit

Seal conduit openings to keep water, dirt, and animals from damaging your wiring.

Bore Sealing Plugs

Pull-Through Bore Sealing Plugs

Permanently plug unused holes–even deep or angled ones—in manifolds and other hydraulic or pneumatic components. The required installation tool reaches inside holes to expand these plugs with the pull of a trigger, making them a good choice for high-volume assembly.

Push-In Bore Sealing Plugs

Permanently seal unthreaded, counterbored holes in manifolds and other pneumatic or hydraulic components. Unlike plugs that install with an air- or hydraulic-powered tool, these plugs don’t require power to install.