Filter by
Thread Size
Nose Material
Drive Style
Locking Type
Body Material
Extended Nose Force
Compressed Nose Force
Threadlocker Type
Body Diameter
Performance
Thread Spacing
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Ball-Nose Spring Plungers
 |
 |
Align, position, and lock moving parts for most machining and assembly tasks. These spring plungers have a spring-loaded ball that compresses when a part presses against it, and then pops out into a notch or groove to hold the part in place. Unlike long-nose spring plungers, the ball rolls easily in and out of position, so they're a great fit for applications that require consistent, smooth movement, such as positioning parts in an assembly line and aligning fixtures and jigs when cutting or drilling.
Spring plungers are available with or without a threadlocker. Those with a threadlocker won't wiggle loose from vibration. Spring plungers without a threadlocker are easier to remove.
440C Stainless Steel Nose—The strongest, most wear-resistant stainless steel noses, these grind against hard metal surfaces without denting or scratching. However, they are not as corrosion resistant as 316 stainless steel.
Nylon Nose—Extra soft to avoid scratching delicate surfaces. Nylon is best for use on soft materials, such as aluminum. It will swell and weaken when exposed to moisture, however, so it should only be used in dry environments.
Spring Plungers | Spring Plunger Drivers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nose, mm | Nose Force, lbf | Body | Drive Style | |||||||||||
Thread Size | Extended Lg. | Dia. | Extended | Compressed | Material | Lg., mm | Front | Back | Each | Each | ||||
440C Stainless Steel Nose | ||||||||||||||
| M8 x 1.25 mm | 1.5 | 5 | 1.1 | 2.3 | 18-8 Stainless Steel | 16 | Spring Plunger Driver | Slotted | 85015A52 | 00000 | 3382A15 | 00000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 1.1 | 2.3 | Black-Zinc-Plated Steel | 16 | Spring Plunger Driver | Slotted | 3391A36 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 3.4 | 6.7 | 18-8 Stainless Steel | 16 | Spring Plunger Driver | Slotted | 85015A51 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 3.4 | 6.7 | Black-Oxide Steel | 16 | Spring Plunger Driver | Slotted | 3391A35 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 9 | 13.4 | 18-8 Stainless Steel | 16 | Spring Plunger Driver | Slotted | 85015A53 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 9 | 13.4 | Black-Zinc-Plated Steel | 16 | Spring Plunger Driver | Slotted | 3391A37 | 0000 | 3382A15 | 0000 | ||
Nylon Nose | ||||||||||||||
| M8 x 1.25 mm | 1.5 | 5 | 1.1 | 2.3 | 18-8 Stainless Steel | 16 | Spring Plunger Driver | Slotted | 2277A56 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 1.1 | 2.3 | Steel | 16 | Spring Plunger Driver | Slotted | 2191A16 | 00000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 3.4 | 6.7 | 18-8 Stainless Steel | 16 | Spring Plunger Driver | Slotted | 2277A55 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 3.4 | 6.7 | Steel | 16 | Spring Plunger Driver | Slotted | 2191A15 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 9 | 13.4 | 18-8 Stainless Steel | 16 | Spring Plunger Driver | Slotted | 2277A57 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 1.5 | 5 | 9 | 13.4 | Steel | 16 | Spring Plunger Driver | Slotted | 2191A17 | 00000 | 3382A15 | 0000 | ||
Long-Nose Spring Plungers
 |  |
 |
Lock heavy moving parts securely in place. Often used in indexing applications, these have a longer nose than ball-nose spring plungers to withstand greater side forces without disengaging. The nose compresses when a part presses against it, and then pops out into deep notches or grooves for a strong hold.
Spring plungers are available with or without a threadlocker. Those with a threadlocker won't wiggle loose from vibration. Spring plungers without a threadlocker are easier to remove.
Steel Nose—The strongest, most wear-resistant noses, these won't deform from stress and vibration. Steel is best for dry environments, however, since moisture will cause it to rust.
18-8 Stainless Steel Nose—The choice for wet and outdoor environments, 18-8 stainless steel resists rusting. It's strong enough for most jobs, but won't withstand stress and vibration as well as steel.
Acetal Nose—The best plastic for damp and wet environments, acetal won't swell or lose strength if exposed to moisture. These noses are extra soft to avoid scratching delicate surfaces. They are best for use on soft materials, such as aluminum.
Spring Plungers | Spring Plunger Drivers | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nose, mm | Nose Force, lbf | Body | Drive Style | |||||||||||
Thread Size | Extended Lg. | Dia. | Extended | Compressed | Material | Lg., mm | Front | Back | Each | Each | ||||
Steel Nose | ||||||||||||||
| M8 x 1.25 mm | 3 | 3.5 | 2 | 7.9 | Black-Oxide Steel | 22 | Spring Plunger Driver | — | 84995A45 | 00000 | 3382A15 | 00000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 5.6 | 15.7 | Black-Oxide Steel | 22 | Spring Plunger Driver | — | 84995A47 | 0000 | 3382A15 | 0000 | ||
18-8 Stainless Steel Nose | ||||||||||||||
| M8 x 1.25 mm | 3 | 3.5 | 2 | 7.9 | 18-8 Stainless Steel | 22 | Spring Plunger Driver | — | 8502A25 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 5.6 | 15.7 | 18-8 Stainless Steel | 22 | Spring Plunger Driver | — | 8502A27 | 0000 | 3382A15 | 0000 | ||
Acetal Nose | ||||||||||||||
| M8 x 1.25 mm | 3 | 3.5 | 2 | 7.9 | 18-8 Stainless Steel | 22 | Spring Plunger Driver | — | 8339A26 | 00000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 2 | 7.9 | Black-Oxide Steel | 22 | Spring Plunger Driver | — | 8281A26 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 2.2 | 8.7 | 18-8 Stainless Steel | 22 | Spring Plunger Driver | — | 8339A15 | 00000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 2.2 | 8.7 | Black-Oxide Steel | 22 | Spring Plunger Driver | — | 8281A15 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 5.6 | 15.7 | 18-8 Stainless Steel | 22 | Spring Plunger Driver | — | 8339A21 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 3 | 3.5 | 5.6 | 15.7 | Black-Oxide Steel | 22 | Spring Plunger Driver | — | 8281A21 | 0000 | 3382A15 | 0000 | ||
| M8 x 1.25 mm | 4.8 | 3.4 | 3 | 15 | Black-Oxide Steel | 25.4 | — | Hex | 2467A38 | 00000 | ——— | 0 | ||
Spring Plunger Drivers
 |
For Thread Size | For Spring Plunger Nose Type | Each | |||
|---|---|---|---|---|---|
Steel | |||||
| 5/16"-18, M8 | Ball, Long | 3382A15 | 00000 | ||
Add-a-Handle Retractable Spring Plungers
 |  |
Customize these spring plungers with a handle (not included) that's the size, shape, texture, and color you want. Retractable spring plungers give you the control to position, align, and lock components as needed for your job.
Steel Nose—The strongest, most wear-resistant noses, these won't deform from stress and vibration. Steel is best for dry environments, however, since moisture will cause it to rust.
Nose | Nose Force, lbf | Body | Handle End Thread | Nonlocking | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Extended Lg. | Dia. | Extended | Compressed | Material | Lg. | Size | Lg. | Each | |||
Steel Nose | |||||||||||||
| 5/8"-11 | 1.02" | 0.315" | 0.315" | 2.7 | 6.9 | Black-Oxide Steel | 2.13" | M8 × 1.25 mm | 31/64" | 8507A16 | 000000 | ||
Toggle Clamp Holding Screws
Quick-Release Pins for Blind Holes
Raised Push Button
 |  |
With the narrowest head, these pins fit in tight spaces. Push the button to insert and remove.
18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand stress and vibration as well as steel.
Recessed Push Button
 |  |
The button doesn’t stick out, so these pins won’t release accidentally if bumped. Hold down the button to insert and remove. The head has a hole for adding a split ring and a lanyard (sold separately).
Nickel-Plated Carbon Steel—With a durable finish, these pins resist rust, salt water, and mild chemicals.
Adjustable-Travel Push/Pull Clamps
 |
The plunger can be secured at any position along its travel. Push the plunger forward until it contacts the workpiece and then rotate the lever handle to clamp a workpiece from the side. These clamps have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push/Pull—Steel | |||||||||||||||
| 2,000 | 7 7/8" | 1 3/16" | 7 7/8" | Round | 5/8" | Internal | M8 | 15 | 6 3/8" | 15" | Plain | 5010A92 | 0000000 | ||
Push/Pull Toggle Clamps
 |  |
Push/Pull—Steel Internal Plunger Thread Cushion Grip | Push/Pull—Steel Internal Plunger Thread Plain Grip |
Hold workpieces from the side.
Push/Pull Clamp—Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
18-8 Stainless Steel Body—Stainless steel clamps have good corrosion resistance.
Clamps | Replacement Grips | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plunger | When Clamped | ||||||||||||||||
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Each | Each | ||||
Push/Pull—Steel | |||||||||||||||||
| 300 | 1 15/16" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 | 3 9/32" | 5 15/32" | Cushion | 5093A12 | 000000 | ——— | 0 | ||
| 600 | 1 5/8" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 | 3 7/16" | 4 25/32" | Cushion | 5093A43 | 00000 | 5071A105 | 00000 | ||
| 800 | 1 3/4" | 11/16" | 1 5/8" | Round | 1/2" | Internal | M8 | 25 | 3 1/2" | 6" | Cushion | 5093A15 | 00000 | ——— | 0 | ||
| 1,100 | 1 9/16" | 13/32" | 1 1/2" | Round | 9/16" | Internal | M8 | 35 | 3 1/32" | 5 7/8" | Plain | 5093A23 | 000000 | ——— | 0 | ||
Push/Pull—18-8 Stainless Steel | |||||||||||||||||
| 800 | 1 1/4" | 1" | 1 1/4" | Round | 1/2" | Internal | M8 | 25 | 3 9/32" | 4 11/16" | Cushion | 5093A35 | 00000 | 5071A105 | 0000 | ||
Vacuum Cup Levelers
 |  |
Male and Female Connections |
Save time aligning your vacuum cups manually between pick-and-place tasks. Also known as spring plungers, these levelers use a spring to automatically adjust for height and alignment differences with each stroke. Because the spring also creates a gentle point of contact with your object, these levelers help your vacuum cups last longer. They don’t rotate, so your object will stay in the same position—use them in repetitive vacuum lifting applications where precision is required.
Choose levelers based on the required stroke length and thread compatibility with your cup and system. Tighten the mounting nuts on the body to secure them in a panel or to a mounting bracket.
Auto-Adjusting Push Toggle Clamps
 |  |
Clamps hold workpieces of different thicknesses without manual adjustment. |
Hold workpieces of different thicknesses with one clamp. These clamps automatically adjust to compensate for variations in size. They secure when the plunger is fully extended to hold your workpiece from the side. The holding screw has a nonmarring tip.
Plunger | When Clamped | Holding Screws | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | For Max. Workpiece Variation | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | No. of | Tip Material | Thread Size | Each | |||
Push Only—Steel | |||||||||||||||||||
| 700 | 5/8" | 3" | 1" | 1" | Round | 15/32" | Internal | M8 | 19 | 1 13/16" | 9 3/16" | Cushion | 1 | Plastic | M6 | 5127A13 | 000000 | ||
Hole-Mount Push/Pull Toggle Clamps
 |
Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side. These clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
18-8 Stainless Steel Body—Stainless steel clamps have good corrosion resistance.
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Includes | Each | |||
Push/Pull—Steel | |||||||||||||||
| 300 | 2 3/16" | 1 1/2" | Round | 7/16" | Internal | M8 | 25 | 4 3/16" | 4 1/4" | Cushion | Mounting Nut | 5093A37 | 000000 | ||
Push/Pull—18-8 Stainless Steel | |||||||||||||||
| 400 | 2 3/16" | 1 1/2" | Round | 7/16" | Internal | M8 | 25 | 4 3/16" | 4 1/4" | Cushion | Mounting Nut | 5093A44 | 00000 | ||
Food and Beverage Vacuum Cups for Delicate Bags and Film
 |  |
Female |
 |
Grooved Stopper Pad |
Attach these cups to threaded connections on your vacuum system to gently lift bags, plastic film, and other sanitary wrappings. They have an ultra-thin, flexible edge that presses against your item, forming a tight seal. Made from FDA-compliant silicone rubber, these cups are safe for direct contact with food. They're also bright blue, so they're easy to find and remove if they fall into your line.
Add levelers for vacuum cups to lift workpieces with varying heights.
Warning: Never use to lift people or items over people.
Aluminum Fitting—The aluminum fitting won't corrode from water and humidity.
Grooved Stopper Pad—The grooved stopper pad inside the cup keeps thin materials from wrinkling without reducing suction.
Cups | Replacement Cups | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp., ° F | Female | |||||||||||||||||
Wt. Cap. @ Vacuum | Cup Dia. | Compressed Cup Ht. | Cup Ht. | Thread Size | Thread Type | For Use With | Food Industry Std. | Min. | Max. | Wt. | Features | Overall Ht. | Each | Each | ||||
For Smooth Surfaces | ||||||||||||||||||
Aluminum Fittings and Blue Silicone Rubber Cups | ||||||||||||||||||
| 0.89 lb. @ 24 in. Hg | 1.38" | 0.63" | 0.75" | M8 | Metric | Delicate Bags, Bagged Materials, Food, Film, Plastic | FDA Compliant 21 CFR 177.2600 | -20 | 190 | 0.02 lb. 0.01 kg | Grooved Stopper Pad | 0.98" | 7754N24 | 000000 | 7754N13 | 000000 | ||
| 2.2 lb. @ 24 in. Hg | 1.97" | 0.69" | 0.87" | M8 | Metric | Delicate Bags, Bagged Materials, Food, Film, Plastic | FDA Compliant 21 CFR 177.2600 | -20 | 190 | 0.05 lb. 0.02 kg | Grooved Stopper Pad | 1.10" | 7754N28 | 00000 | 7754N14 | 00000 | ||
Push Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 | 3 7/16" | 4 3/4" | Cushion | 6124A15 | 000000 | ||
Push Toggle Clamps with Rotating Handle
 |  |
Handle Rotated |
The handle can be rotated 125° for easier access or extra clearance above the clamp. These clamps secure when the plunger is fully extended to hold a workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 450 | 1 9/16" | 7/8" | 1 9/16" | Round | 7/16" | Internal | M8 | 25 | 2 7/16" | 6 3/4" | Cushion | 2508N12 | 000000 | ||
Heavy Duty Reverse-Action Push Toggle Clamps
 |
A highly durable construction with hardened steel pivot pins and bushings provides a long service life. Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 2,500 | 1 1/8" | 1 1/8" | 1" | Round | 1/2" | Internal | M8 | 25 | 2 1/2" | 7 5/8" | Cushion | 5222N2 | 000000 | ||
