Pneumatic Glue Applicators

Filter by

Fitting Connection

For Syringe Capacity

Actuator Style

Inlet Connection

Depth

Height

Component

Power Source

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Hose ID

1/16"

3/32"

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Width

Pipe Size

Maximum Pressure

Air Inlet Connection

Minimum Pressure

Material

Voltage

Manufacturer

Hose Material

Cartridge Size

Connects To

43 Products

Air-Powered Syringe Dispensers


With Controller, Foot Pedal, Vacuum Knob, and Touchscreen	With Controller

With Foot Pedal

Reduce fatigue by using pressure from your air compressor to dispense viscous fluids. These dispensers are especially useful for adhesives that are too thick and sticky to push out with the force of your thumb. Simply step down on the foot pedal for as long as you want to dispense out of the syringe barrel (sold separately for some dispensers). All have an air pressure control knob you can adjust to change the flow, depending on your material and the amount you want to dispense. Since you operate these dispensers with your foot, you’ll have both hands free to position the syringe barrel and make adjustments.

Vacuum Knob—Dispensers with a vacuum knob create suction to prevent dripping in between tasks. Adjust the suction depending on your material.

Controller—Dispensers with a controller can be set to release material for a certain amount of time and in intervals, regardless of how long you press down on the foot pedal. This makes it easier to control how much you dispense at a time.

Touchscreen—Dispensers with a touchscreen let you save up to 15 custom programs. Each program consists of its own pattern, such as a dot placed every three inches. Assign a sequence to the programs to dispense in a custom pattern. Often used in electronics assemblies, they can apply line after line or dot after dot of adhesive to your products.

				Air Inlet
	Ht.	Wd.	Dp.	Connection	Coupling Size	For Tube OD	Gender	Pressure Range, psi	Voltage Range, V AC	Includes		Each
With Foot Pedal



		3 3/4"	6 3/4"	3 3/4"	Push to Connect	—	1/4"	Male	0 to 100	—	Syringe Holder	5755N3	0000000


		With Foot Pedal and Vacuum Knob



				3 3/4"	6 3/4"	3 3/4"	Push to Connect	—	1/4"	Male	0 to 100	—	Syringe Holder	5755N4	000000


				With Controller, Foot Pedal, and Vacuum Knob



						7 3/4"	4 1/2"	5 1/2"	Quick Connect	1/8	—	Male	0 to 100	120 to 240	50 Dispensing Tips 8 Syringe Barrels 8 Syringe Pistons 4 Adapters (For 3 ml, 5 ml, 10 ml, 30 ml)	5755N2	000000


						With Controller, Foot Pedal, Vacuum Knob, and Touchscreen



								7 3/4"	4 1/2"	6 1/4"	Quick Connect	1/8	—	Male	0 to 100	120 to 240	50 Dispensing Tips 4 Syringe Pistons 4 Syringe Barrels 4 Adapters (For 3 ml, 5 ml, 10 ml, 30 ml)	5755N1	000000

Accessories for Syringe Dispensers

Finger Switches for Controllers

Image of Product. Front orientation. Push-Button Switches. Air-Powered Syringe Dispensers .

Attach a finger switch to your syringe barrel to dispense with a button instead of the foot pedal.

No. of Blades	Electrical Connection Type	Switch Starting Position	Housing Material	Cord Lg., ft.	Lg.	Wd.	Ht.		Each
3	Plug In	1 Off	Plastic	5	3/4"	1/4"	1/4"	5755N51	000000

Syringe Adapters

Adapters convert syringe barrels into air-powered dispensing syringes. They have a gasket that creates a tight seal around a barrel, preventing leaks. Use the included hose to connect your dispenser. The adapter head swivels 360°, so you can maneuver the syringe without worrying about the hose kinking.

		Hose
	For Syringe Cap.	ID	OD	Lg., ft.	Material	Includes		Each
Quick Connect Inlet Connection



		3 ml 0.1 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N11	000000


		5 ml 0.17 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N21	00000
		10 ml 0.34 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N31	00000
		30 ml 1.01 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N41	00000

Syringe Holders

Adapter,

Syringe, and

Syringe Holder

(Sold Separately)

Hang syringes when not in use to prevent contamination and spills. Or use these holders with air-powered dispensers to apply adhesive hands-free. In this setup, instead of moving your syringe around your workpiece, you slide your workpiece underneath your syringe. These holders work with most 5 ml to 30 ml syringes.

For No. of Syringes	Hole Dia.	Ht.	Wd.	Dp.	Material		Each
2	0.68", 1.04"	6 1/2"	3"	4 1/4"	Metal	66505A36	000000
3	0.61", 0.79", 1.08"	5 3/4"	3"	4"	Metal	5823N1	00000

Accessory Kits for 3 3⁄4" High Dispensers

Image of Product. Front orientation. Syringe Dispenser Accessory Kits. Air-Powered Syringe Dispensers .

Accessory kits are required for 3 3/4" high dispensers.

Includes		Each
4 Adapters (For 3 ml, 5 ml, 10 ml, 30 ml) 8 Syringe Barrels 8 Syringe Pistons 12 Dispensing Needles Reducer Fitting (5/32" OD to 1/4" OD)	5755N6	0000000

Syringe Adapters for Air-Powered Syringe Dispensers


Barbed Inlet Connection	Quick Connect Inlet Connection

Convert plastic syringe barrels into syringes for air-powered dispensers. These adapters come with a gasket that creates a tight seal around a barrel, preventing leaks. Use the included hose to connect your dispenser. The adapter head swivels 360°, so you can maneuver the syringe without worrying about the hose kinking.

	Syringe Adapters								Syringe Adapter Gaskets
		Hose
	For Syringe Cap.	ID	OD	Lg., ft.	Material	Includes		Each	Pkg. Qty.		Pkg.
Barbed Inlet Connection



		5 ml, 6 ml 0.17 fl. oz., 0.2 fl. oz.	3/32"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	66275A12	000000	5	66275A16	000000


		10 ml 0.34 fl. oz.	3/32"	5/32"	6	PVC	Gasket, Hose Fitting	66275A113	00000	5	66275A117	0000
		30 ml, 35 ml 1 fl. oz., 1.2 fl. oz.	3/32"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	66275A14	00000	5	66275A18	00000


		Quick Connect Inlet Connection



				3 ml 0.1 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N11	00000	—	———	0


				5 ml 0.17 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N21	00000	—	———	0
				10 ml 0.34 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N31	00000	—	———	0
				30 ml 1.01 fl. oz.	1/16"	5/32"	6	Polyurethane Rubber	Gasket, Hose Fitting	5988N41	00000	—	———	0

Air-Powered 3M Two-Part Adhesive Dispensing Guns

Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.

1:1/2:1 mix ratio plungers sold separately.

			Air Inlet
	For Cartridge Size, fl. oz.	Operating Air Pressure, psi	Pipe Size	Thread Type	Gender	Air Hose Included		Each
Air Powered



		1.25, 1.59, 1.64, 1.69	50	1/4	NPT	Male	No	7467A15	0000000

Syringe Holders

For 2 Syringes (Not

Included)

Hang syringes when not in use to prevent contamination and spills or use these holders with air-powered dispensers to apply adhesive hands-free. In this setup, instead of moving your syringe around your workpiece, you slide your workpiece underneath your syringe. These holders work with most 5 ml to 30 ml syringes.

For No. of Syringes	Hole Dia.	Wd.	Dp.	Ht.	Material		Each
2	0.68", 1.04"	3"	4 1/4"	6 1/2"	Metal	66505A36	000000

Electric/Air-Powered 3M Glue Guns

For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing. Load up to three glue sticks at once. The gun includes one tip; additional tips are sold separately. Use only with 3M glue sticks.

	For Glue Stick											Air Inlet					Electrical
Mfr. Model No.	Dia.	Lg.	Mfr.	For 3M Glue Stick Model No.	Wattage, W	Voltage, V AC	Temp. Setting, ° F	Adhesive Output, lb/hr	Duty Cycle	Warm-Up Time, min.	Operating Air Pressure, psi	Pipe Size	Thread Type	Gender	Air Hose Lg., ft.	Cord Lg., ft.	Connection	No. of Blades	Includes		Each
II	1"	3"	3M	3738, 3762	500	120	385	7.5	Continuous	15	50 to 80	1/8	NPT	Male	8	8	Straight Blade	3	3/32" Diameter Tip Wire Bench Stand	74785A65	000000000

Glue Gun Nozzles

	For 3M Gun Model No.	Opening ID	Overall Ht.
Conical Tips


II, TC/TC-Q LT	1/8"	3/4"	7333A26	000000

Air-Powered One-Part Adhesive Dispensing Guns

These guns are powered with compressed air for controlled dispensing on small and large jobs alike. Connect them to an air supply with an air hose (sold separately). Use with a cartridge, cartridge holder, and nozzle (each sold separately).

			Air Inlet
	For Cartridge Size, fl. oz.	Operating Air Pressure, psi	Thread Size	Gender	Air Hose Included		Each
Air Powered



		2.5, 6, 12	0 to 100	5/16"-24	Male	No	7579A18	0000000

Accessories for Adhesive Dispensing Guns

Hoses

Connect air-powered one-part adhesive dispensing guns to an air supply with an air hose.

		Threaded Hose Connection		Quick-Disconnect Hose Connection
Lg., ft.	Operating Air Pressure, psi	Thread Size	Gender	Coupling Size	Style	Component	Gender		Each
10	0 to 100	5/16"-24	Female	1/4	Industrial	Plug	Male	7579A14	0000000

Empty Cartridges

Image of Product. Front orientation. Adhesive Dispensing Gun Cartridges.

Fill these cartridges with one-part adhesive and use them with a dispensing gun and cartridge holder. For precise dispensing, add a nozzle or a luer lock adapter and luer lock hub needle.

	Tip
Cap., fl. oz.	Pipe Size	Thread Type	Gender	Material	Includes		Each
2.5	1/4	NPT	Female	Polyethylene	Cap, Piston	7579A41	00000
6	1/4	NPT	Female	Polyethylene	Cap, Piston	7579A42	0000
12	1/4	NPT	Female	Polyethylene	Cap, Piston	7579A43	00000

Material	Pkg. Qty.		Pkg.
Polypropylene	10	7579A37	000000

Cartridge Holders

A quick disconnect bayonet connection attaches these holders to a gun to hold an adhesive cartridge in place. Thread these holders onto a gun to hold an adhesive cartridge in place.

For Cartridge Size, fl. oz.	Material		Each
2.5	Steel	7579A15	0000000
6	Steel	7579A17	000000
12	Steel	7579A16	000000

Nozzles


Round	Ribbon

Attach these nozzles to a cartridge for controlled dispensing of one-part adhesives.

Round—Round nozzles dispense a uniform bead.

Ribbon—Ribbon nozzles have a flat opening to spread adhesive as they dispense.

		Opening
	For Cartridge Size, fl. oz.	ID	Wd.	Ht.	Lg.	Pipe Size	Thread Type	Gender	Material		Each
Round



		2.5, 6, 12	1/32"	—	—	4"	1/4	NPT	Male	Polyethylene	7579A33	00000


		2.5, 6, 12	1/16"	—	—	2 1/2"	1/4	NPT	Male	Polyethylene	7579A31	0000
		2.5, 6, 12	1/16"	—	—	4"	1/4	NPT	Male	Polyethylene	7579A34	0000
		2.5, 6, 12	1/16"	—	—	6"	1/4	NPT	Male	Polyethylene	7579A51	0000
		2.5, 6, 12	1/8"	—	—	2 1/2"	1/4	NPT	Male	Polyethylene	7579A32	0000
		2.5, 6, 12	1/8"	—	—	4"	1/4	NPT	Male	Polyethylene	7579A53	0000
		2.5, 6, 12	1/8"	—	—	6"	1/4	NPT	Male	Polyethylene	7579A52	0000
		2.5, 6, 12	1/8"	—	—	10"	1/4	NPT	Male	Polyethylene	7579A813	00000


		Ribbon



				2.5, 6, 12	—	3/8"	3/64"	4 1/2"	1/4	NPT	Male	Polyethylene	7579A74	00000


				2.5, 6, 12	—	1/2"	1/16"	4"	1/4	NPT	Male	Polyethylene	7579A75	00000
				2.5, 6, 12	—	3/4"	1/8"	4 1/4"	1/4	NPT	Male	Polyethylene	7579A811	00000
				2.5, 6, 12	—	1"	1/8"	4 1/4"	1/4	NPT	Male	Polyethylene	7579A77	00000

Loctite® Two-Part Adhesive Dispensing Guns

Air-Powered Dispensing Gun

for 1.69 fl. oz. Cartridge

Size

Do not use these guns with 3M cartridges.

Air Powered—Air-powered guns dispense two-part adhesives with compressed air. Use these guns only with Loctite® dual cartridges.

			Air Inlet
	For Cartridge Size, fl. oz.	Operating Air Pressure, psi	Pipe Size	Thread Type	Gender	Air Hose Included		Each
Air Powered



		1.69	80	1/4	NPT	Male	No	74695A101	0000000