Pneumatic Hoists | McMaster-Carr

Filter by

Power Source

Air

System of Measurement

Inch

Weight Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

Lift Length

Hoist Sling Type

Operation Type

Clearance

Chain Material

Lifting Speed

Manufacturer

Hook Material

Application

Body Material

Manufacturer Series

For Use With

Mount Type

Air Hose Length

Duty Cycle

Inlet Pipe Size

Air Consumption @ Pressure

21.2 ft³/min @ 90 psi

For Use Outdoors

Hook Opening Width

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

RoHS

29 Products

Air-Powered Chain Hoists

CM Budgit with Lever Control

CM Budgit with Pull Control

Harrington TCR with Lever Control

Harrington TCR with Pull Control

Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.

Hoists with overload protection will not operate when the load exceeds capacity.

Cast iron hoists have a durable housing for longer life than aluminum hoists.

A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.

Warning: Never use to lift people or items over people.

Capacity
tons	lbs.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Specifications Met		10-ft. Lift	15-ft. Lift	20-ft. Lift
Aluminum with Chain Container
CM Budgit 2200 with Lever Control
1/4	500	65	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	000000000	000000000	000000000
1/2	1,000	45	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
1	2,000	23	18"	1 1/4"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
CM Budgit 2200 with Pull Control
1/4	500	65	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
1/2	1,000	45	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
CM Budgit 6000 with Lever Control
2	4,000	15	22"	1 3/8"	NPT	3/4	80 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	000000	00000000	00000000	00000000
Cast Iron with Chain Container and Overload Protection
Harrington TCR with Lever Control
1/4	500	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1/2	1,000	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1	2,000	37	19"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
2	4,000	19	22"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
Harrington TCR with Pull Control
1/4	500	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1/2	1,000	68	19"	1 1/8"	NPT	1/2	63 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
1	2,000	37	19"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000
2	4,000	19	22"	1 1/8"	NPT	1/2	62 cfm @ 90 psi	Continuous Use	ASME B30.10, ASME B30.16, ASME HST-5	0000000	00000000	00000000	00000000

Variable-Speed Precise-Positioning Compact Air-Powered Chain Hoists

Change or hold the speed at any time during operation so you can start the hoist softly and gradually decelerate. They are small and lightweight so you can easily move them between jobs. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting, and overload protection prevents hoists from operating if the load exceeds capacity.

A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.

Warning: Never use to lift people or items over people.

Hoists

Chain Hoist

Capacity
tons	lbs.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Specifications Met		10-ft. Lift	15-ft. Lift	20-ft. Lift
Aluminum with Chain Container and Overload Protection
CM ShopAir
0.15	300	31	11"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	000000000	000000000	000000000
1/4	500	21	11"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000
0.3	600	16	12"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000
1/2	1,000	11	12"	1"	NPT	3/8	34 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000

Motor Repair Kits

Motor Repair Kit

For Inlet Thread Type	For Inlet Pipe Size		Each
NPT	3/8	0000000	0000000

Replacement Latch Kits

Replacement Latch Kit

For Inlet Thread Type	For Inlet Pipe Size		Each
NPT	3/8	0000000	000000

Replacement Control Tubes & Pendant Throttle Controls

Replacement Control
Tube & Pendant
Throttle Control

For Lift Lg., ft.		Each
10	0000000	000000000
15	0000000	00000000
20	0000000	00000000

Spark-Resistant Air-Powered Chain Hoists

With Pull Control

With Lever Control

These hoists have an aluminum body, stainless steel chain, and bronze hooks for spark resistance. They have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.

Hoists with overload protection will not operate when the load exceeds capacity.

A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.

Warning: Never use to lift people or items over people.

Capacity
tons	lbs.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Specifications Met		10-ft. Lift	15-ft. Lift	20-ft. Lift
Aluminum
CM Budgit 2200 with Pull Lever
3/8	750	60	16"	1 1/8"	NPT	3/8	48 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	000000000	000000000	000000000
Aluminum with Overload Protection
CM Budgit 6000 with Lever
1/2	1,000	16	17"	1 1/4"	NPT	3/4	80 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	00000000
1	2,000	8	22"	1 1/4"	NPT	3/4	80 cfm @ 90 psi	Continuous Use	ASME B30.16, ASME HST-5, CSA B167	0000000	00000000	00000000	000000000

Air-Powered Wire Rope Hoists

These hoists are quieter and more stable than air-powered chain hoists. Change or hold the speed at any time during operation, so you can start the hoist softly and gradually decelerate. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting. The gears are enclosed to protect them from debris and contamination for smooth operation.

Warning: Never use to lift people or items over people.

Capacity
tons	lbs.	Lift Lg., ft.	Lifting Speed, fpm	Clearance	Hook Opening Wd.	Inlet Thread Type	Inlet Pipe Size	Air Consumption @ Pressure	Duty Cycle	Wire Rope Dia.		Each
Cast Iron with Enclosed Gears
1/8	300	7	36	23"	7/8"	NPT	3/8	21.2 cfm @ 90 psi	Continuous Use	5/32"	0000000	000000000

Heavy Duty Air-Powered Winches for Wire Rope—For Lifting

These winches operate longer and require shorter breaks than standard air-powered winches. Because they run on compressed air, they give you longer operating times than electric winches. They have an automatic brake that holds the load when the motor stops. To lift, mount winches above the load, or use winches with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

												Inlet
Max. Cap., lbs.	Fully Wound Cap., lbs.	Min. Line Speed, fpm	For Max. Rope Lg., ft.	For Rope Dia.	O'all Wd.	O'all Lg.	O'all Ht.	Material	Rope with Hook Included	Air Hose Included	Air Consumption @ Pressure	Gender	Thread Type	Pipe Size	Features		Each
30 Minutes On, 10 Minutes Off
1,500	1,000	40	170	1/4"	17 1/2"	21 1/2"	12 1/2"	Aluminum, Steel	No	No	100 cfm @ 90 psi	Female	NPT	1/2	Reversible Pulling Directions	0000000	000000000

Air-Powered Winches for Wire Rope—For Lifting

Because this winch runs on compressed air, it gives you a longer operating time than electric winches. It has an automatic brake that holds the load when the motor stops. To lift, mount winch above the load, or use winch with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.

For wire rope, see Wire Rope with Hook for Winches.

Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.

Warning: Never use to lift people or items over people.

												Inlet
Max. Cap., lbs.	Fully Wound Cap., lbs.	Min. Line Speed, fpm	For Max. Rope Lg., ft.	For Rope Dia.	O'all Wd.	O'all Lg.	O'all Ht.	Material	Rope with Hook Included	Air Hose Included	Air Consumption @ Pressure	Gender	Thread Type	Pipe Size	Features		Each
15 Minutes On, 45 Minutes Off
2,000	1,200	13	90	5/16"	8 7/8"	14 3/8"	15"	Aluminum, Steel	No	No	80 cfm @ 100 psi	Female	NPT	1/2	Reversible Pulling Directions	00000000	000000000