Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.

The lightweight, pencil-sized grinder in these kits works at high speeds and is more durable than light duty grinders, making it good for frequent use.

Collect the dust, debris, and fine particulates you generate while grinding by attaching the plastic dust hood on these grinders to a vacuum system.

The bendable shaft with handpiece lets these grinders operate smoothly with less vibration, noise, and heat than other hand-held grinders.

More durable than our Light Duty Grinders, these are designed for more frequent use.

Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.

More durable than our Light Duty Grinders, these are designed for more frequent use.

Use these grinders with straight (Type 1) grinding wheels. They are smaller and lighter than our Electric Straight Grinders.

The orbital motion produces more consistent finishes than standard disc sanders. Also known as random orbital sanders.

With a built-in water hose that lubricates your work surface and washes away the resulting grit, these sanders are less likely to scratch your surface than other air-powered sanders.

The insulated housing reduces vibration and won’t transmit cold air to the operator’s hand.

Automate sanding on your line by attaching these sanders to a robot arm. Compared to sanders operated by humans, these apply the same force and pattern for a more consistent and repeatable finish.

These tools are for light, intermittent use.

Use these hammers and chisels for cutting, chipping, scraping, and staking.

Thread the retainer onto your tool for easy chisel changes—pull back on the retainer to insert or remove the chisel.

More powerful than Air-Powered Chiseling Hammers, these tools are often used for heavy material removal in foundry and fabrication shops.

A powerful blast makes these tools good for heavy pavement-breaking and asphalt-cutting jobs.

Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Also known as United States Navy (U.S.N.)-style chisels, these tools have an oval or round collar on the shank.

Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These chisels have a combination round and hex shank that works with spline-drive rotary hammers.

Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These chisels work with electric and air-powered pavement-breaker hammers.

Use with electric demolition hammers.

This economy cutoff saw has a lightweight nylon handle and is for less prolonged use than the standard air-powered portable cutoff saw.

Use abrasive wheels with this saw to cut through hard materials.

Dual pistons make this saw more powerful than the light duty air-powered reciprocating saw and reduce vibration.

A higher air consumption rating allows this saw to work in longer bursts and power through tougher materials than the light duty air-powered hacksaw.

The included adapter lets you use chisels in these scalers. Change the blows-per-minute by varying the pressure on the speed control.

These needles are steel or stainless steel.

Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter.

These scalers produce 80-90% less vibration than other scaling tools.

These nibblers punch small pieces out of material to create an almost burr-free cut with no material distortion.

Good for high-volume cutting and trimming.

These air-powered cutters include a semi-square blade for no-fray cuts.

Make fast cuts without manual effort.

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Connect the included hose to your air supply and these blowguns are ready to use.

The extra length lets you access hard-to-reach areas.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

Increase your reach with the telescoping nozzle.

These blowguns provide more than two times the airflow of standard guns.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

The flat nozzle distributes air over a wide area.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Made from rubber, these nozzles won’t scratch or damage sensitive workpieces.

These premium nozzles are engineered for the most efficient airflow consumption.

Attach to your blowgun to direct airflow.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.

Adjust airflow to control consumption and noise.

These needle-style nozzles force air to a precise pinpoint.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Create a sheet of high-velocity air.

Use one bracket for 3" to 18" wide air knives; two brackets for 24" to 42" wide air knives, and three brackets for 48" wide air knives.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

An ionizing bar temporarily neutralizes static to protect against ESD (electrostatic discharge).

Clean parts with compressed air without propelling fluids and debris all over your shop. These vacuum/blowers quickly blow coolant, oil, and chips off your parts while a vacuum sucks them into a removable drum for recycling or disposing of them.

Distribute heat over a wide area for large jobs.

Blast your heating, drying, and shrinking projects with hot air to get the job done quickly. Choose from blowers with temperature settings from 300° to 750° F.

These tools are suitable for general shop, maintenance, and automotive work.

Use these tools for general shop applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

Set torque and the clutch slips to prevent you from exceeding it.

Connect these tools to your shop air to install and remove fasteners.