Filter by
Impact Strength Rating
About Composites
More
Easy-to-Machine Hard Fiber Tubes
- Color: Gray
- Max. Temperature: 235° F
- Tensile Strength: 9,000-21,000 psi (Good)
- Impact Strength: 1.8-2.5 ft.-lbs./in. (Good)
- Hardness: Rockwell R80 (Hard)
- For Use Outdoors: No
- Specifications Met: MIL-F-10336, MIL-F-1148, UL 94 HB
Readily machined and punched into custom parts, these hard fiber tubes are often made into bushings and washers. Also known as vulcanized fiber, they're constructed from lightweight cotton fabric that's been chemically treated to make it hard and dense.
For technical drawings and 3-D models, click on a part number.
| Wall Thick. | Wall Thick. Tolerance | OD | OD Tolerance | ID | ID Tolerance | Lg. | Each | |
| 1/16" | -0.01" to 0.01" | 9/16" | -0.005" to 0.005" | 7/16" | -0.008" to 0.008" | 40" | 0000000 | 000000 |
| 1/16" | -0.01" to 0.01" | 5/8" | -0.005" to 0.005" | 1/2" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/16" | -0.01" to 0.01" | 7/8" | -0.005" to 0.005" | 3/4" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/16" | -0.01" to 0.01" | 1" | -0.005" to 0.005" | 7/8" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.015" to 0.015" | 11/16" | -0.005" to 0.005" | 7/16" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 3/4" | -0.005" to 0.005" | 1/2" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 1 1/4" | -0.008" to 0.008" | 1" | -0.008" to 0.008" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 1 1/2" | -0.008" to 0.008" | 1 1/4" | -0.01" to 0.01" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 1 3/4" | -0.008" to 0.008" | 1 1/2" | -0.01" to 0.01" | 40" | 0000000 | 00000 |
| 1/8" | -0.01" to 0.01" | 2 1/4" | -0.01" to 0.01" | 2" | -0.01" to 0.01" | 40" | 0000000 | 00000 |
Easy-to-Machine Hard Fiber Rods
- Color: Gray
- Max. Temperature: 235° F
- Tensile Strength: 9,000-21,000 psi (Good)
- Impact Strength: 1.8-2.5 ft.-lbs./in. (Good)
- Hardness: Rockwell R80 (Hard)
- For Use Outdoors: No
- Specifications Met: MIL-F-10336, MIL-F-1148, UL 94 HB
Frequently used to make gears and bushings, these hard fiber rods can be readily machined and punched into custom parts. They are constructed from lightweight cotton fabric that's been chemically treated to make them hard and dense. Hard fiber is also known as vulcanized fiber.
For technical drawings and 3-D models, click on a part number.
45" Lg. | |||
|---|---|---|---|
| Dia. | Dia. Tolerance | Each | |
| 3/16" | -0.005" to 0.005" | 0000000 | 000000 |
| 1/4" | -0.005" to 0.005" | 0000000 | 00000 |
| 5/16" | -0.006" to 0.006" | 0000000 | 00000 |
| 3/8" | -0.006" to 0.006" | 0000000 | 00000 |
| 1/2" | -0.006" to 0.006" | 0000000 | 00000 |
| 9/16" | -0.006" to 0.006" | 0000000 | 000000 |
| 5/8" | -0.006" to 0.006" | 0000000 | 000000 |
| 3/4" | -0.006" to 0.006" | 0000000 | 000000 |