The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Protect bus bars and other high-voltage devices—this tubing withstands voltages up to 5,000 volts.

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this wrap has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Tough and durable, this tubing resists abrasion and tearing.

This durable tubing won’t crack under stress—even when temperatures drop below freezing.

Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

This resilient tubing won’t crack due to stress or impact.

Tubing meets NSF/ANSI Standard 61 for drinking water.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.