McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    87 Products

    Ultra Electrical Insulating Rexolite Polystyrene Sheets

    Image of Product. Front orientation. Plastic. Ultra Electrical Insulating Rexolite Polystyrene Sheets.
    Known for its electrical insulating properties, these sheets are often used for cable connectors, electrical housings, and in microwave applications. This material is also called Rexolite.
    Wd.
    Lg.
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Color
    Mil. Spec.
    Food Industry
    Std.
    Each
    1/8" Thick (0" to 0.008" Tolerance)
    6"6"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T11000000
    6"12"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T21000000
    12"12"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T31000000
     
    1/4" Thick (0" to 0.008" Tolerance)
    6"6"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T1200000
    6"12"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T22000000
    12"12"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T32000000
     
    1/2" Thick (0" to 0.012" Tolerance)
    6"6"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T1300000
    6"12"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T23000000
    12"12"Cast-75212Semi-Clear Off-WhiteFed. Spec. L-P-516FDA Standard
    1491T33000000
     

    Drain Cleanout Hole Covers

    Allow easy access to cleanout plugs hidden behind walls and floors. Covers come with the bolts you need to hold them in place.
    Covers for Wall Cleanouts
    Image of Product. Front orientation. Drain Cleanout Hole Covers. Covers for Wall Cleanouts.
    No. of
    Holes
    Dia.
    Thk.
    Material
    Mounting Fasteners
    Included
    Bolt
    Lg.
    Each
    14"1 1/4"PolystyreneYes2"2043K51000000
    15"1 17/32"PolystyreneYes2"2043K5200000

    Plastic Selector Packs

    Image of Product. Front orientation. Plastic. Plastic Selector Packs.
    You'll get one piece of each material listed, except the Multipurpose pack, where you'll get two pieces (one piece of nylon 6/6 and one piece of cast nylon).
    Performance
    Material
    Wd.
    Lg.
    No. of
    Pieces
    Each
    MultipurposeDelrin® Acetal, HDPE, ABS, Nylon, LDPE, Noryl PPO, Polyester Plastic, Polystyrene, Rexolite Polystyrene, UHMW Polyethylene2"2"115331K93000000

    Plastic Legend Plates with Message

    Image of Product. With Keyway Notch. Front orientation. Legend Plates. Plastic Legend Plates with Message, Notch.

    With Keyway

    Notch

    Made of plastic, these plates come engraved with your choice of message. Slip them over control board buttons and panel lights to identify their function and mark system components.
    For Panel Cutout
    Dia.
    Keyway
    Type
    Ht.
    Wd.
    Material
    Choose a Message
    Each
    30 mm/1 3/16"Notch1 3/4"1 3/4"PolystyreneClose, Down, Forward, Hand-Off-Auto, Off, Off-On, On, Open, Reset, Reverse, Run, Start, Start-Stop, Stop, Up9235K85700000

    Easy-Thermoform Polystyrene Strips

    Image of Product. Front orientation. Plastic. Easy-Thermoform Polystyrene Strips.
    Often fabricated into signs, packaging, and light duty housings, these strips are easy to thermoform.
    2 ft. Long
    4 ft. Long
    Wd.
    Fabrication
    Temp.,
    ° F
    Color
    Flammability
    Rating
    Food Industry
    Std.
    Each
    Each
    1/8" Thick (-0.013" to 0.013" Tolerance)
    2"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N22000001195N2100000
    4"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N4200001195N410000
    6"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N6200001195N610000
    8"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N8200001195N8100000
     
    3/16" Thick (-0.019" to 0.019" Tolerance)
    2"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N2400001195N230000
    4"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N4400001195N430000
    6"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N6400001195N6300000
    8"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N8400001195N8300000
     
    1/4" Thick (-0.025" to 0.025" Tolerance)
    2"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N2600001195N250000
    4"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N4600001195N4500000
    6"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N6600001195N6500000
    8"Extruded0 to 185WhiteUL 94 HB
    FDA Standard
    1195N86000001195N8500000
     

    Easy-Thermoform Polystyrene Sheets

    Image of Product. Front orientation. Plastic. Easy-Thermoform Polystyrene Sheets.
    Often fabricated into signs, packaging, and light duty housings, these sheets are easy to thermoform.
    Wd.
    Lg.
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Color
    Flammability
    Rating
    Food Industry
    Std.
    Each
    1/32" Thick (-0.003" to 0.003" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K3100000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K3800000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K2900000
     
    1/16" Thick (-0.005" to 0.005" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K320000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K3900000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K2200000
     
    3/32" Thick (-0.006" to 0.006" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K330000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K4100000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K2400000
     
    1/8" Thick (-0.008" to 0.008" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K340000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K4200000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K2500000
     
    5/32" Thick (-0.01" to 0.01" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K3500000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K4300000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K2600000
     
    3/16" Thick (-0.012" to 0.012" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K3600000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K4400000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K27000000
     
    1/4" Thick (-0.03" to 0.03" Tolerance)
    12"24"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K3700000
    36"36"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K4500000
    40"72"Extruded0185WhiteUL 94 HB
    FDA Standard
    8734K28000000
     

    Rectangular Shims

    Image of Product. Front orientation. Shims. Rectangle, Sold Individually.
    Sized to fill wide gaps, use these shims straight out of the box or cut to your exact needs with a utility knife to align cabinets, doors, and windows. Each shim is color coded by thickness to quickly spot and grab the right size, saving time and reducing sizing errors. All are made of plastic to resist moisture and prevent rot. Their textured surface keeps them from sliding apart when stacked.
    Thk.
    Thk. Tolerance
    Color
    Material
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    6" Lg. × 4" Wd.
    0.0625"-0.03" to 0.03"YellowPolystyreneASTM D7851095015K41000000
     

    Key Tags

    Write on these tags with a permanent marker to identify and organize keys.
    Oval
    Image of Product. Front orientation. Tags. Key Tags, Oval.
    Oval, shamrock, and square tags have a spring snap that holds up to three standard-sized keys. They are often used with key-control cabinets.
    Ht.
    Wd.
    Thk.
    Material
    Hole
    Dia.
    Spring Snap
    Material
    Choose a Color
    Pkg.
    Qty.
    Pkg.
    1 3/8"1 1/8"1/16"Polystyrene1/4"SteelWhite, Blue, Brown, Green, Red, Yellow208458N2300000
    Shamrock
    Image of Product. Front orientation. Tags. Key Tags, Shamrock.
    Oval, shamrock, and square tags have a spring snap that holds up to three standard-sized keys. They are often used with key-control cabinets.
    Ht.
    Wd.
    Thk.
    Material
    Color
    Hole
    Dia.
    Spring Snap
    Material
    Pkg.
    Qty.
    Pkg.
    1 1/4"1 1/4"1/16"PolystyreneWhite1/4"Steel201333A100000
    Square
    Image of Product. Front orientation. Tags. Key Tags, Square.
    Oval, shamrock, and square tags have a spring snap that holds up to three standard-sized keys. They are often used with key-control cabinets.
    Slot
    Ht.
    Wd.
    Thk.
    Material
    Lg.
    Wd.
    Spring Snap
    Material
    Choose a
    Color
    Pkg.
    Qty.
    Pkg.
    1 1/2"1 1/2"1/16"Polystyrene3/4"3/16"SteelWhite201333A3100000
    1 1/2"1 1/2"1/16"Polystyrene3/4"3/16"SteelBlue, Green208458N240000
    Round
    Image of Product. Front orientation. Tags. Key Tags, Round.
    Round tags have a ring that holds up to five standard-sized keys. They come with labels to write on using pen, pencil, or permanent marker.
    Ring
    Dia.
    Thk.
    Material
    Color
    ID
    Material
    Includes
    Pkg.
    Qty.
    Pkg.
    1 1/4"1/16"PolystyreneWhite3/4"Steel54 Labels258458N1800000

    Breakaway Rectangular Shims

    Image of Product. Front orientation. Shims. Sold Individually, Rectangle, Breakaway.
    Make size adjustments easy with these scored shims—just break off pieces for a custom fit around fasteners or corners. Designed to fill wide gaps, they’re best for aligning cabinets, doors, and windows. All are made of plastic to resist moisture and prevent rot.
    Pkg.
    Thk.
    Thk. Tolerance
    Score
    Interval
    Color
    Material
    Specs.
    Met
    Pkg.
    Qty.
    1-4
    5-Up
    6" Lg. × 6" Wd.
    0.0625"-0.032" to 0.032"2" × 6"BlackPolystyreneASTM D638895015K50000000000
     

    Identically Numbered Key Tags

    Choose only the numbers you need to identify and organize keys. These tags have a spring snap that holds up to three standard-sized keys. Numbers are printed on one side.
    Oval
    Image of Product. Front orientation. Tags. Identically Numbered Key Tags.
    Pkg. of 2
    Pkg. of 10
    Ht.
    Wd.
    Thk.
    Material
    Color
    Message
    Color
    Hole
    Dia.
    Spring Snap
    Material
    Choose a Character
    Pkg.
    Pkg.
    1 3/8"1 1/8"1/16"PolystyreneBrownWhite1/4"Steel001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011, 012, 013, 014, 015, 016, 017, 018, 019, 0201333A101000001333A800000

    Key Tag Assortments

    Identify and organize your keys with the tags in these assortments.
    Round
    Image of Product. Front orientation. Tags. Key Tag Assortments, Round.
    Write on round tags with a permanent marker or use the included labels to write with a pen or pencil. These assortments come with a random selection of the colors listed.
    Hole
    Dia.
    Ht.
    Thk.
    Material
    Color
    Key
    Cap.
    Ring Material
    Wd.
    Ht.
    Includes
    Pkg.
    Qty.
    Pkg.
    1 1/4"2"1/16"PolystyreneWhite, Blue, Green, Magenta, Orange, Purple, Yellow4Nickel-Plated Zinc Alloy3/8"3/16"54 Labels258347N1100000

    Plastic Legend Plates for Emergency Stop Switches

    Image of Product. Front orientation. Legend Plates. Plastic Legend Plates for Emergency Stop Switches, Style G.

    Style G

    Indicate the location of stop switches so they’re easy to find in an emergency.
    BACO Controls—Plates made by BACO Controls are only compatible with BACO switches.
    Style
    For Panel Cutout
    Dia.
    Keyway
    Type
    Ht.
    Wd.
    Material
    Mfr.
    Message
    Mount
    Type
    Color (Message
    Color)
    Each
    G30 mm/1 3/16"Notch1 3/4"1 3/4"PolystyreneBACO ControlsEmergency StopPanelRed (White)9235K57700000

    Sequentially Numbered Key Tags

    Number keys in sequence. These tags are often used with key-control cabinets.
    Oval
    Image of Product. Front orientation. Tags. Sequentially Numbered Key Tags, Oval.
    Oval, shamrock, and square tags have a spring snap that holds up to three standard-sized keys. Numbers are printed on one side.
    Character
    Ht.
    Wd.
    Thk.
    Material
    Color (Message
    Color)
    Hole
    Dia.
    Pkg.
    Qty.
    Pkg.
    001-0401 3/8"1 1/8"1/16"PolystyreneBrown (White)1/4"401333A15000000
    001-1001 3/8"1 1/8"1/16"PolystyreneBrown (White)1/4"1001333A2200000
    101-2001 3/8"1 1/8"1/16"PolystyreneBrown (White)1/4"1001333A2300000
    201-3001 3/8"1 1/8"1/16"PolystyreneBrown (White)1/4"1001333A22500000
    Shamrock
    Image of Product. Front orientation. Tags. Sequentially Numbered Key Tags, Shamrock.
    Oval, shamrock, and square tags have a spring snap that holds up to three standard-sized keys. Numbers are printed on one side.
    Character
    Ht.
    Wd.
    Thk.
    Material
    Color (Message
    Color)
    Hole
    Dia.
    Pkg.
    Qty.
    Pkg.
    001-0401 1/4"1 1/4"1/16"PolystyreneWhite (Black)1/4"401333A17000000
    001-1001 1/4"1 1/4"1/16"PolystyreneWhite (Black)1/4"1001333A500000
    101-2001 1/4"1 1/4"1/16"PolystyreneWhite (Black)1/4"1001333A6100000
    201-3001 1/4"1 1/4"1/16"PolystyreneWhite (Black)1/4"1001333A73300000
    301-4001 1/4"1 1/4"1/16"PolystyreneWhite (Black)1/4"1001333A1900000
    Square
    Image of Product. Front orientation. Tags. Sequentially Numbered Key Tags, Square.
    Oval, shamrock, and square tags have a spring snap that holds up to three standard-sized keys. Numbers are printed on one side.
    Slot
    Character
    Ht.
    Wd.
    Thk.
    Material
    Color (Message
    Color)
    Lg.
    Wd.
    Pkg.
    Qty.
    Pkg.
    001-0201 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"201333A35100000
    001-0401 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"401333A36100000
    001-0601 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"601333A36200000
    001-1001 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"1001333A3200000
    001-1201 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"1201333A36900000
    101-2001 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"1001333A3400000
    201-3001 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"1001333A36500000
    301-4001 1/2"1 1/2"1/16"PolystyreneWhite (Black)3/4"0.188"1001333A36600000

    Plastic Engraving Legend Plates

    Image of Product. Front orientation. Legend Plates. Plastic Engraving Legend Plates, Style E.

    Style E

    Engrave your message into these plates by removing the surface layer, revealing a contrasting color underneath. Slip them over control-board buttons and panel lights to clearly identify their functions.
    Use a rotary engraver to inscribe any of these plates.
    Polystyrene—ABS and Polystyrene can’t be laser-engraved because they will burn.
    Style
    For Panel Cutout
    Dia.
    Keyway
    Type
    Ht.
    Wd.
    Thk.
    Material
    Mount
    Type
    Choose a Color (Message
    Color)
    Each
    E30 mm/1 3/16"Notch1 3/4"1 3/4"1/16"PolystyrenePanelBlack (White), Red (Black)9235K5900000
    back to top