Use this pump to remove water with small solids up to 1/4" in diameter. It activates when plugged in; add a plug-in switch to control when the pump activates. Install in water that's at least 2" deep. Pump includes a 25-ft. hose with cam-and-groove fittings for quick, secure connections and a storage crate with built-in filtration to protect the pump from debris.

Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.

These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Use the handle to carry pumps from job to job. Install in debris-free water that’s at least 3/4" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

The switch activates on increasing pressure caused by rising water levels for a long service life. It has a separate cord, so you can replace the switch without replacing the whole pump. Use the handle to carry pumps from job to job. Install in debris-free water that’s at least 3/4" deep. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Also known as bilge pumps, these remove fresh and salt water from spots where other pumps don’t fit. They have an internal sensor, so they turn on when they detect water and turn off when the water is removed. Pumps are fully submersible. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on.

Pumps for 12 volts DC work with 12-volt batteries.

Pumps for 120 volts AC are for use in debris-free water.

Convenient to keep in your toolkit for on-site cleanup, these pumps attach to your drill for small liquid extraction jobs, as well as draining water from clogged sinks and emptying tanks. Pumps are self-priming, which means they create a suction force to draw liquid upward. Do not use with solids.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

Wheel these pumps to remote areas with no power. They can handle sewage water with thick sludge, silt, and debris up to 2" in diameter. Pumps are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Mount up to 20 feet above your liquid source. All have a pull-start engine. They are not submersible.

These pumps cannot be sold to Canada due to import regulations.

Pumps with a tank capacity of 1.6 gallons includes an electric starter that operates on a 12-volt battery (sold separately).

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

Create a vacuum for on-site sampling, atomizing, and filtration, or generate compressed air for power tools when and where you need it. Since these pumps don't require lubrication, there’s no risk of oil contamination. Their barbed connections join quickly and easily in tight spaces—no threading or sealant needed. In vacuum generation, maximum flow rate is the rate at which air is pumped before a vacuum is created. Flow rate steadily decreases as the pump generates the vacuum. The larger the tank, the longer it will take to form a vacuum.

Repair kits include filter/muffler components, a gasket, a leaf valve, limiters, and an O-ring.

For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

Inflate everything from truck tires to air springs on heavy equipment using a DC power source. These pumps run on a 12-volt vehicle battery (not included) or a DC generator.

Maximum flow rate is shown when there's no resistance. As pressure builds, such as when inflating a tire, the flow rate will decrease because the compressor works harder to push the air in.

Vehicle plug pumps connect to a vehicle outlet. Set the desired air pressure on the gauge; the auto-shutoff stops these pumps once it’s reached. Grounding clamp pumps connect directly to a vehicle battery.

Fill up your tires in minutes no matter where you are—these pumps are small enough to tuck inside your glovebox. Despite their size, they're powerful enough to use on vehicles as large as delivery vans and pickup trucks. Set the desired air pressure on the digital gauge, and the pump’s auto-shutoff feature will stop inflation once the target is reached.

Top off tires and other inflatables when you’re out in the field and away from your air tank. Set the desired air pressure on the digital gauge—its auto-shutoff stops the pump once the target is reached. An LED work light illuminates your tire as you work. These pumps come with rechargeable batteries and chargers that work with other tools in your shop.

Power pneumatic tools in the shop or out in the field. Compact and lightweight, these air compressors are easy to carry and store out of the way when not in use. Plus, their rechargeable battery and charger work with other tools in your lineup. They automatically kick on when their tank pressure drops to the actuation point, then turn off when it reaches the maximum.

Makita compressors cannot be sold outside the United States due to product restrictions.

Compressors turn on when the tank falls to the actuation pressure and they turn off when the tank reaches the maximum pressure.

Compressors that cannot be sold to the listed areas are restricted due to product regulations.

Get compressed air from a DC power source—these piston compressors can run on a vehicle battery (not included) for use on trucks and heavy equipment, or a DC generator.

12V DC compressors connect directly to a standard passenger vehicle battery. Use them to inflate tires, clean filters, and operate light-duty tools, such as nailers, hammers, and small impact wrenches. For best results with a vehicle battery, use a deep-cycle, large-cell battery rated for continuous use.

24V DC compressors connect directly to a commercial or construction vehicle battery. Use them to power heavy equipment, such as refrigerators or freezers for sensitive equipment—they have two built-in fans that keep them cool when run continuously.

Connector assemblies come with a three-foot hose and a connector that can be fixed to a panel or frame for operating compressors installed in difficult-to-reach locations, such as under a vehicle.