Quickly attach this flexible wire rope to loads. It includes a hook with a latch on one end to save you time when setting up pulley systems. With more than twice as many individual wires as standard options, it's also easier to bend and wind onto winches and drums without wear.

Warning: Not for overhead lifting.

A thick, rugged frame gives these pullers long life, while a hardened steel chain makes them the strongest, most durable pullers we offer. There’s a stop on one end of the chain to prevent it from pulling completely through the ratchet. All pullers have a revolving handle that folds out on either side of the lever for easy operation at any angle.

Pullers provide the capacity of a winch in a versatile, portable tool. The wire rope on these pullers is stronger than rope and webbing but not as bulky as chain.

These pullers have a thick, rugged frame for long life. They have a soft, wide strap so they won't damage surfaces.

These versatile pullers are made of aluminum with stainless steel rope for corrosive environments. They give you the capacity of a winch in a portable tool. Wire rope is stronger than rope and webbing but not as bulky as chain. The handle is designed to bend when the load exceeds capacity. Pullers have an RFID (radio frequency identification) chip for location tracking.

Powered by your Milwaukee M18 battery, these hoists lift up to 2,000 lbs. Since they don’t need a power cord or compressed air source, these CM Batterystar hoists are a good choice for heavy lifting at temporary jobsites. They’re under 50 lbs., so carry them from job to job.

Despite their small size, they’re packed with safety features. The included remote control works from 60 ft. away, so you can stand back and out of harm’s way. These hoists have both an electronic and a mechanical clutch for overload protection. If either senses a load that is too heavy, they'll stop any movement. As you lower a heavy load, the mechanical brake controls the descent to prevent slipping. In a pinch, you can also lower these hoists using your drill.

IP rated, the hoist housing, transmitter, and motor are sealed to protect against dust and water. The same goes for the remote—set it down around your dusty, dirty jobsite without a second thought.

Warning: Never use to lift people or items over people.

Reduce fatigue and help prevent injuries by letting these hoists bear the brunt of your load. Designed for repetitive, all-day lifting and tool-holding jobs, these battery-powered hoists let you guide loads by hand but without the weight. Hang them from a rail or trolley wherever you need to transfer loads in your facility—they’re often used to lift parts onto receiving stations and over assembly lines. Moving your load is as easy as grabbing the handle and guiding it from point A to point B. When you take your hand off the handle, these hoists hold your load in place. The ring they hang from can swivel 360° for positioning flexibility.

To minimize downtime, these hoists lift and lower up to 500 loads on a single charge. They also come with a backup battery you can use while the other one is charging.

Pull out the quick-release pin to switch the hook out for a scissor lifter or vacuum lifter (both sold separately).

Warning: Never use to lift people or items over people.

These pullers have a soft, wide strap so they won't damage surfaces.