ISO Class 4 Positioning Slides

Filter by

Product Family

Electric Slides

System of Measurement

Stroke Length

Dynamic Vertical Load Capacity

Overall Length

Environment

Dynamic Horizontal Load Capacity

Length

Voltage

Travel Distance per Turn

Carriage Length

Thread Size

Material

Maximum Speed

Carriage Width

Carriage Bearing Type

Ball

Carriage Cover Material

Clean Room Standard

Controller Height

Controller Length

Controller Width

Drive Screw Material

Export Control Classification Number (ECCN)

EAR99

REACH

Not Compliant

RoHS

Compliant with Exemptions

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

DFARS Specialty Metals

Exempt

Forward

How can we improve?

Help me decide (beta)

8 Products

...

Clean Room Electric Slides

Slide

Controller

(Included)

Prevent dust from circulating while precisely positioning parts for drilling, fastening, assembly, and measuring. These slides have a built-in vacuum port to remove fine particles that could damage electronics or contaminate batches in clean rooms. Because they have an integrated stepper motor with an included controller, you can adjust the speed, timing, and positioning. At -0.02 to 0.02 mm, these slides have a repeatability thinner than a single sheet of paper, so the carriage hits the same spot every time. Unlike air-powered actuators, they’ll hold their position even if power fails. They’re also more energy efficient.

For the Manufacturer User Manual, click on a part number and select Product Detail.

Dynamic load capacity is the maximum load slides can move. If you increase the speed, the dynamic load capacity decreases. Use a load-speed chart to confirm which slides will work for your application. Click on a part number and select Product Detail to view the chart.

Maximum Speed—Maximum speed is how fast the slide will move under no-load conditions. If you increase the load, the slide speed will decrease.

Travel Distance per Full Step—Travel distance per full step determines the control you have over the slide’s positioning. The smaller the measurement, the finer positioning control you have.

Travel Distance per Turn—Travel distance per turn, also known as screw lead, is how far the carriage moves with one rotation of the ball screw.

Cords—Use a USB cord (sold separately) and free downloadable software to program the controller.

	Slides																		Cords
	Dynamic Load Cap., lb.			Travel Distance per, mm			Overall, mm			Carriage
	Horiz.	Vert.	Max. Speed, mm/s	Full Step	Turn	Repeatability	Lg.	Wd.	Ht.	Lg., mm	Wd., mm	Bearing Type	Base Material	Full Load Current, amp	Voltage, V DC	Clean Room Std.		Each		Each
200 mm Stroke Length



		110	44	250	0.08	8	-0.02 mm to 0.02 mm	541	70	84	122	60	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N32	000000000	6449N17	0000000


		143	50	250	0.1	10	-0.02 mm to 0.02 mm	614.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N42	00000000	6449N17	000000


		300 mm Stroke Length



				110	44	250	0.08	8	-0.02 mm to 0.02 mm	641	70	84	122	60	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N33	00000000	6449N17	000000


				400 mm Stroke Length



						110	44	250	0.08	8	-0.02 mm to 0.02 mm	741	70	84	122	60	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N34	00000000	6449N17	000000


						143	50	250	0.1	10	-0.02 mm/0.02 mm	814.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N44	00000000	6449N17	000000


						600 mm Stroke Length



								143	50	250	0.1	10	-0.02 mm to 0.02 mm	1,014.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N46	00000000	6449N17	000000


								800 mm Stroke Length



										143	50	250	0.1	10	-0.02 mm to 0.02 mm	1,214.5	90	85.5	170	74	Ball	Aluminum	5	24	Fed. Std. Class 10, ISO Class 4	6833N48	00000000	6449N17	000000