Strong and durable, these multipurpose bits are for use with bit screwdrivers.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

The small-diameter shaft can access screws in narrow recessed holes.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

The slightly tapered tip wedges into the screw recess for a secure hold. Also known as Torx-Align bits.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

The toughest bits available, these withstand the shock and twisting force of impact drivers. Designed for screws with a square recess in the head, they are also known as Robertson bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

Ribs forged into the wings of these offset-cross-shaped bits grip the screw recess to reduce stripping. They are also known as ACR® bits.

These bits provide a secure grip on the Phillips/slotted combination-drive screws in electrical equipment.

Use with screws that have two drilled holes.

While screws with a Square/Phillips combination drive can be turned with either a Square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.

Grip the indentations on the head of tri-groove fasteners.

These bits are shaped like a 12-pointed star. They're also known as XZN bits.

A magnet or retaining ring holds the nut in place.

Because they make contact on the flat sides of fasteners rather than only on the corners, these magnetic bits significantly reduce slipping and stripping. They’re also known as lobular bits.

Assortments contain bits with multiple drive styles.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

A magnet holds the nut in place.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

Use with screws that have two drilled holes.

Lock your bit into the adapter to prevent accidental disengagement. These adapters hold hex-shank bits (also known as insert bits) in powered tools.

The head is angled 90° to drive fasteners in tight spaces. Use these adapters to hold hex-shank bits (also known as insert bits) in powered tools.

Bend these adapters up to 90° to access hard-to-reach fasteners. Use them to hold hex-shank bits (also known as insert bits) in powered tools.

Store a variety of sizes and styles of bits and adapters in one compact tray.

Keep these caddies in your tool drawer or take them with you.