Plug-In Power Conditioners

Filter by

System of Measurement

Output Voltage

Input Voltage

Output Current

Output Connection NEMA Type

Number of Outlets

Power

Less than 1,000 VA

1,000 VA to 9,999 VA

Electrical Connection

Current Output

Electrical Phase

Input Connection Type

Frequency

Output Power

Output Electrical Connection

Mounting Location

Transformer Voltage Function

Constant

Step Down

Step Up

Number of Outlets with Battery Backup

Height

Input Connection NEMA Type

Export Control Classification Number (ECCN)

3A992

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

DFARS Specialty Metals

NEMA Type

74 Products

Low-Profile Power-Conditioning Backup Power Supplies

NEMA

5-15

Plug

NEMA

5-15

Socket

Smaller in height than standard backup power supplies, these fit in tight spaces. They transfer power to a built-in battery during brownouts and blackouts with only a momentary loss of power during transfer. They also protect against line noise and power surges. All have a USB connection and cord so you can save data and safely shut down an unattended computer during outage. Choose a power output equal to or greater than the power your equipment requires. Determine your volt-amps requirement by multiplying the amp draw of your equipment by 120V AC.

Output			Run Time, min.		Input NEMA Plugs				Output NEMA Sockets		Output USB Sockets
Power	Current, amp	Voltage, V AC	Half Load	Full Load	Type	Connection	No. of Blades	Output Connection NEMA Type	No. of Outlets	No. of Outlets with Battery Backup	Electrical Connection	No. of Outlets	Ht.	Wd.	Dp.		Each
350 VA/210 W	2.9	120	8	2	5-15	Straight Blade	3	5-15	6	3	USB-B	1	4.1"	4.3"	7.3"	7530K62	0000000
550 VA/300 W	4.6	120	5	1.2	5-15	Straight Blade	3	5-15	10	5	USB-A, USB-B	2	4.1"	4.3"	7.3"	7530K63	000000
750 VA/450 W	6.3	120	11	2.5	5-15	Straight Blade	3	5-15	12	6	USB-A	1	3.1"	12.2"	6.9"	7530K44	000000

Enclosed Isolating Transformers

These transformers have isolated primary and secondary coils to protect your sensitive equipment from input voltage spikes.

Single Phase—Plug Input and Socket Output Connection


NEMA 5-15 Plug	NEMA 6-15 Plug

NEMA 5-15 Socket

Constant Voltage—When wired as constant-voltage transformers, they filter out voltage spikes and electrical noise.

	Voltage, V AC			Input		Output
	Input	Output	Power Output, VA	Plug Connection	Connection NEMA Type	Socket Connection	Connection NEMA Type	Ht.	Wd.	Dp.	Features		Each
Constant Voltage



		115	115	150	3-Blade Straight	5-15	3-Slot Straight	5-15	3.9"	3.1"	4.2"	Isolated Coils	70245K71	0000000


		115	115	250	3-Blade Straight	5-15	3-Slot Straight	5-15	4.7"	3.8"	4.4"	Isolated Coils	70245K72	000000
		115	115	1,000	3-Blade Straight	5-15	3-Slot Straight	5-15	5.3"	4 1/2"	8.1"	Isolated Coils	70245K74	000000


		Step-Down Voltage



				230	115	100	3-Blade Straight	6-15	3-Slot Straight	5-15	3 1/2"	2.8"	3.6"	Isolated Coils	70245K81	000000


				230	115	250	3-Blade Straight	6-15	3-Slot Straight	5-15	4.7"	3.8"	4.4"	Isolated Coils	70245K83	000000
				230	115	500	3-Blade Straight	6-15	3-Slot Straight	5-15	4.7"	3.8"	6"	Isolated Coils	70245K84	000000

Power-Conditioning Backup Power Supplies

12 amp Current Output

NEMA

5-15

Plug

NEMA

5-15

Socket

Protect sensitive equipment—these conditioners raise or lower current to keep it at a stable level during dips and surges. There is no battery transfer time during a power dip. During brownouts and blackouts, they transfer power to a built-in battery with only a momentary loss of power during transfer. Power supplies also protect against line noise and power surges. They have a USB connection and cord so you can save data and safely shut down an unattended computer during outage.

Choose a power output equal to or greater than the power your equipment requires. Determine your volt-amps requirement by multiplying the amp draw of your equipment by 120V AC.

Output			Run Time, min.		Input NEMA Plugs				Output NEMA Sockets		Output USB Sockets
Power	Current, amp	Voltage, V AC	Half Load	Full Load	Type	Connection	No. of Blades	Output Connection NEMA Type	No. of Outlets	No. of Outlets with Battery Backup	Electrical Connection	No. of Outlets	Ht.	Wd.	Dp.		Each
1,440 VA/900 W	12	120	12	3	5-15	Straight Blade	3	5-15	10	5	USB-A	2	11"	3.9"	16.1"	70475K34	0000000

International Transformers


Output for Europe and United States	Output for Germany, Spain, and United States


2-Blade Straight Plug	CEE 7/3 Socket

Universal Socket	NEMA 5-15 Socket

These transformers continuously operate at 80% of the rated power output. They convert voltage to run American appliances in Europe or European appliances in the United States. These transformers are CE Marked, which means they meet European Union safety standards.

		Input		Output
	Power Output, VA	Plug Connection	Plug Style	Socket Connection	Socket Style	No. of Outputs	Freq., Hz	Ht.	Wd.	Dp.	Plug Adapter Type (Style)		Each
Single Phase—Step-Up/Step-Down Voltage, 110V AC/220V AC Input and Output Voltage



		100	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	1 1	50/60	3"	3"	5"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K111	000000


		200	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	1 1	50/60	3 1/4"	3 1/2"	5 3/4"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K112	00000
		300	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	1 2	50/60	3 1/2"	3 3/4"	6"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K81	000000
		500	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	1 2	50/60	3 1/2"	4"	6 1/2"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K82	000000
		800	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	1 2	50/60	4 1/2"	5 1/4"	7 1/2"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K113	000000
		1,000	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	1 2	50/60	4 3/4"	6 1/4"	9"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K83	000000
		1,500	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	2 2	50/60	5 3/4"	6 3/4"	9 3/4"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K114	000000
		2,000	2-Blade Straight	CEE 7/7 (Europe)	2-Slot Straight 3-Slot Straight	CEE 7/3 (Type F) (Germany, Spain) NEMA 5-15 (United States)	2 2	50/60	6"	7 1/2"	9 3/4"	NEMA 1-15 (United States), NEMA 5-15 (United States)	70285K84	000000
		3,000	2-Blade Straight	CEE 7/7 (Europe)	3-Slot Straight 3-Slot Straight	Universal (Europe) NEMA 5-15 (United States)	1 1	50/60	5 3/4"	7"	9 3/4"	NEMA 1-15 (United States), NEMA 5-15 (United States), BS 1363 (Type G) (United Kingdom)	70285K115	000000

Backup Power Supplies

NEMA

5-15

Plug

NEMA

5-15

Socket

Transfer power to a built-in battery during brownouts and blackouts with only a momentary loss of power during transfer. With a USB connection and cord, you can save data and safely shut down an unattended computer during an outage with these supplies. They also protect against line noise and power surges. Choose a power output equal to or greater than the power your equipment requires. Determine your volt-amps requirement by multiplying the amp draw of your equipment by 120V AC. Power supplies cannot be sold to the regions listed due to local energy efficiency requirements.

Output			Run Time, min.		Input NEMA Plugs					Output USB Sockets		Output Ethernet Sockets
Power	Current, amp	Voltage, V AC	Half Load	Full Load	Type	Connection	No. of Blades	Output Connection NEMA Type	No. of Outlets	Electrical Connection	No. of Outlets	Connection	No. of Outlets	Ht.	Wd.	Dp.	Cannot Be Sold To		Each
700 VA/350 W	5.8	120	10	3	5-15	Straight Blade	3	5-15	6	USB-A	1	RJ45	1	9.8"	4.8"	13.6"	Colorado, Vermont, Washington	7530K38	0000000

Uninterruptible Backup Power Supplies


NEMA 5-15 Plug	NEMA 5-20 Plug	NEMA 5-15 Socket

NEMA 5-20 Socket	NEMA L5-20 Socket

Protect sensitive and critical electronic equipment—these uninterruptible power supplies (UPS) do not suffer a loss of power when switching from your power source to the UPS during an outage. They also protect against frequency variation and waveform distortion. All have USB and DB9 connections with cords so you can save data and safely shut down an unattended computer during outages. Choose a power output that is equal to or greater than the power your equipment requires.

	Output				Run Time, min.		Input NEMA Plugs
Input Voltage Range, V AC	Power	Current, amp	Voltage, V AC	Voltage Accuracy	Half Load	Full Load	Type	Connection	No. of Blades	Output Connection NEMA Type	No. of Outlets	Ht.	Wd.	Dp.	Specs. Met		Each
100 to 120	1,000 VA/900 W	9.1	120	±1%	18.2	6.3	5-15	Straight Blade	3	5-15	8	3.5"	17.4"	17.8"	UL 1778	70485K31	000000000
100 to 120	1,500 VA/1,350 W	12.5	120	±1%	16.5	5.8	5-15	Straight Blade	3	5-15	8	3.5"	17.4"	17.8"	UL 1778	70485K32	00000000
100 to 120	2,200 VA/1,800 W	18.3	120	±1%	20.2	7.7	5-20	Straight Blade	3	5-20 L5-20	6 1	3.5"	17.4"	23.9"	UL 1778	70485K24	00000000

Bench-Top Variable-Voltage Transformers

Mount these portable transformers to any flat surface. Turn the dial to adjust the voltage you need within a given range. Also known as variacs, they are often used in laboratories to vary power, heat, speed, or force.

Single Phase—Plug Input and Socket Output Connection

Image of Product. Front orientation. Transformers. Bench-Top Variable-Voltage Transformers.


NEMA 5-15 Plug	NEMA 5-20 Plug	NEMA 6-15 Plug

NEMA 5-15 Socket	NEMA 5-20 Socket	NEMA 6-15 Socket

Constant Voltage—When wired for constant voltage, transformers filter out voltage spikes and electrical noise.

	Voltage, V AC			Input		Output
	Input	Output	Power Output, VA	Plug Connection	Connection NEMA Type	Socket Connection	Connection NEMA Type	Max. Current, amp	Ht.	Wd.	Dp.	Features	Certification		Each
Step-Up/Step-Down/Constant Voltage



		120	0 to 132	330	3-Blade Straight	5-15	3-Slot Straight	5-15	2.5	5.3"	6.1"	4.1"	Fuse, Power-Indicating Light	CSA Certified	6994K11	0000000


		120	0 to 140	700	3-Blade Straight	5-15	3-Slot Straight	5-15	5	5.3"	6.1"	4.1"	Fuse, Power-Indicating Light	—	6994K14	000000
		120	0 to 140	1,400	3-Blade Straight	5-15	3-Slot Straight	5-15	10	7"	4.6"	5 1/2"	Fuse, Power-Indicating Light	CSA Certified	6994K17	000000
		120	0 to 140	2,100	3-Blade Straight	5-15	3-Slot Straight	5-15	15	9.4"	6.2"	6"	Fuse, Power-Indicating Light	CSA Certified	6994K21	00000000
		120	0 to 140	3,080	3-Blade Straight	5-20	3-Slot Straight	5-20	22	10.9"	8"	6.3"	Fuse, Power-Indicating Light	—	6994K23	00000000
		240	0 to 280	980	3-Blade Straight	6-15	3-Slot Straight	6-15	3.5	7"	4.6"	5 1/2"	Fuse, Power-Indicating Light	—	6994K18	000000
		240	0 to 280	2,660	3-Blade Straight	6-15	3-Slot Straight	6-15	9.5	9.4"	6.2"	6"	Fuse, Power-Indicating Light	—	6994K22	00000000


		Step-Down/Constant Voltage



				120	0 to 120	1,440	3-Blade Straight	5-15	3-Slot Straight	5-15	12	7"	4.6"	5 1/2"	Fuse, Power-Indicating Light	CSA Certified	6994K24	000000


				240	0 to 240	1,200	3-Blade Straight	6-15	3-Slot Straight	6-15	5	7"	4.6"	5 1/2"	Fuse, Power-Indicating Light	CSA Certified	6994K19	000000

Low-Current Transformers

Power low-voltage devices such as alarms and sensors.

Single Phase—Plug Input and Screw-Terminal Output Connection


NEMA 1-15	NEMA 5-15

NEMA

1-15

Plug

NEMA

5-15

Plug

	Voltage, V AC			Input
	Input	Output	Power Output, VA	Plug Connection	Connection NEMA Type	Ht.	Wd.	Dp.	Features	Certification		Each
Step-Down Voltage



		120	12	20	2-Blade Straight	1-15	3.2"	2.6"	1.9"	—	UL Listed	5600K31	000000


		120	16	20	2-Blade Straight	1-15	3.1"	2.1"	1.9"	—	UL Listed	5600K32	00000
		120	16	40	3-Blade Straight	5-15	3.6"	2.6"	2.1"	Auto Reset, Power-Indicating Light	UL Listed	5600K19	00000
		120	24	20	3-Blade Straight	5-15	3.2"	2.6"	1.9"	Auto Reset, Power-Indicating Light	UL Listed	5600K33	00000
		120	24	40	3-Blade Straight	5-15	3.6"	2.6"	2.1"	Auto Reset, Power-Indicating Light	UL Listed	5600K18	00000

Ultra-Low-Noise Bench-Mount Power Supplies

Change AC voltage to DC voltage to power extremely sensitive audio, measuring, and testing devices while keeping electronic interference—often called output or ripple noise—from passing on to the device. The lower the output noise value, the less interference the power supplies will create. Although they create less noise than other power supplies, these power supplies are larger, heavier, and give off more heat.

View the output on a digital or analog display.

If you exceed the maximum load or current, all of these power supplies will shut down to protect both the power supply and the connected device.

With 1 Output Power Connection—Digital Display

Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

Over Temperature—Those with overvoltage or over temperature protection will shut down if you exceed the maximum voltage or temperature.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single Phase—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 18V DC	0 amp to 5 amp	0 W to 90 W	4 mV DC	Front	Constant Current, Constant Voltage	5.5"	6.5"	10.4"	Over Temperature, Overcurrent, Overload	7686K25	0000000


		Standard Banana Socket	0V DC to 30V DC	0 amp to 3 amp	0 W to 90 W	4 mV DC	Front	Constant Current, Constant Voltage	5.5"	6.5"	10.4"	Over Temperature, Overcurrent, Overload	7686K24	000000
		Standard Banana Socket	0V DC to 30V DC	0 amp to 6 amp	0 W to 180 W	5 mV DC	Front	Constant Current, Constant Voltage	5.5"	6.5"	10.4"	Over Temperature, Overcurrent, Overload	7686K27	000000
		Standard Banana Socket	1V DC to 18V DC	0 amp to 3 amp	0 W to 54 W	2 mV DC	Front	Constant Current, Constant Voltage	4.3"	9.4"	6"	Overcurrent, Overload	5773N12	000000
		Standard Banana Socket	1V DC to 30V DC	0 amp to 1 amp	0 W to 30 W	2 mV DC	Front	Constant Current, Constant Voltage	4.3"	9.4"	6"	Overcurrent, Overload	5773N11	000000

With 1 Output Power Connection—Analog Display

Analog displays are better than digital displays for monitoring fast output changes, such as dips and spikes.

Output Voltage Selector Switch—Power supplies with an output voltage selector switch let you toggle between two voltage and current output ranges.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single Phase—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC	0 amp to 2 amp	0 W to 60 W	5 mV DC	Front	Constant Current, Constant Voltage	4.3"	8"	8.3"	Overcurrent, Overload	7686K21	0000000


		Standard Banana Socket	0V DC to 18V DC, 0V DC to 36V DC	0 amp to 7 amp, 0 amp to 3.5 amp	0 W to 126 W	4 mV DC	Front	Constant Current, Constant Voltage, Output Voltage Selector Switch	5.5"	12.1"	10.5"	Overcurrent, Overload	7686K26	000000

With 2 Output Power Connections—Analog Display

Analog displays are better than digital displays for monitoring fast output changes, such as dips and spikes.

Over Temperature—Those with overvoltage or over temperature protection will shut down if you exceed the maximum voltage or temperature.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single Phase—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC 0V DC to 30V DC	0 amp to 3 amp 0 amp to 3 amp	0 W to 90 W 0 W to 90 W	5 mV DC 5 mV DC	Front	Constant Current, Constant Voltage	5.5"	12.1"	10.5"	Over Temperature, Overcurrent, Overload	7686K29	0000000

With 3 Output Power Connections—Digital Display

Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

Overvoltage—Those with overvoltage or over temperature protection will shut down if you exceed the maximum voltage or temperature.

UL Listed and C-UL Listed—UL and C-UL listed power supplies meet U.S. and Canadian safety standards.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type	Certification	Includes		Each
Single Phase—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC 0V DC to 30V DC 4V DC to 6.5V DC	0 amp to 2 amp 0 amp to 2 amp 5 amp	0 W to 60 W 0 W to 60 W 20 W to 32.5 W	3 mV DC 3 mV DC 6 mV DC	Front	Constant Current, Constant Voltage	5.7"	10.5"	15"	Overcurrent, Overload, Overvoltage	UL Listed C-UL Listed	Two Pairs of Test Leads (Banana Jack to Alligator Clip)	5775N12	0000000


		Standard Banana Socket	0V DC to 32V DC 0V DC to 32V DC 5V DC	0 amp to 3 amp 0 amp to 3 amp 3 amp	0 W to 96 W 0 W to 96 W 15 W	1 mV DC 1 mV DC 1 mV DC	Front	Constant Current, Constant Voltage	6.7"	9"	12.2"	Overload	—	Two Pairs of Test Leads (Banana Jack to Alligator Clip)	5775N21	000000
		Standard Banana Socket	0V DC to 60V DC 0V DC to 60V DC 2V DC to 6.5V DC	0 amp to 2 amp 0 amp to 2 amp 5 amp	0 W to 120 W 0 W to 120 W 10 W to 32.5 W	3 mV DC 3 mV DC 6 mV DC	Front	Constant Current, Constant Voltage	5.7"	10.5"	15"	Overcurrent, Overload, Overvoltage	—	Two Pairs of Test Leads (Banana Jack to Alligator Clip)	5775N13	000000

With 4 Output Power Connections—Digital Display

Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type	Includes		Each
Single Phase—120/240V AC Input Voltage



		Standard Banana Socket	0V DC to 30V DC 0V DC to 30V DC 3V DC to 6.5V DC 8V DC to 15V DC	0 amp to 5 amp 0 amp to 5 amp 1 amp 3 amp	0 W to 150 W 0 W to 150 W 9 W to 19.5 W 8 W to 15 W	3 mV DC 3 mV DC 6 mV DC 6 mV DC	Front	Constant Current, Constant Voltage	6.3"	10.2"	14.6"	Overcurrent, Overload	Four Pairs of Test Leads (Banana Jack to Alligator Clip)	5773N13	0000000

Programmable Bench-Mount Power Supplies

Use your computer to remotely control these power supplies that convert AC voltage to DC voltage for powering electronics from simple prototypes to advanced testing equipment. All of these power supplies include a USB cable and Windows-compatible software to control, monitor, and record the voltage, current, and power outputs of your device. You can also create programs with up to 20 steps that change voltage and current outputs at set times. A selector switch lets you quickly choose up to three defined settings for voltage and current outputs. The power supplies have an auxiliary output connection, but it will take on the same settings as the primary outputs. View the outputs on their digital display.

These power supplies use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t become too hot. If you exceed the maximum voltage, current, load, or temperature, the power supplies will shut down to protect both the power supply and the connected device.

Remote Voltage Sensing—Power supplies with remote voltage sensing check for any drops in the voltage as they send power to a device. If the voltage dips, they can compensate with extra power, so connected devices always receive the correct voltage.

Maximum Output Noise Peak-to-Peak—Maximum output noise is also known as ripple noise. When power supplies convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this noise won't affect most applications, it can interfere with other signals in extremely sensitive audio, measuring, and testing equipment. The lower the output noise, the less interference it creates.

		Output												Front Auxiliary Output
	Display Type	No. of Power Connections	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Ht.	Wd.	Dp.	Electrical Protection Type	Output Connection Location	Output Features	Voltage, V DC	Current, amp		Each
Single Phase—120V AC Input Voltage



		Digital	1	Standard Banana Socket	1V DC to 16V DC	0 amp to 60 amp	0 W to 960 W	50 mV DC	3.5"	7.9"	10.8"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage, Remote Voltage Sensing	1 to 16	0 to 5	5774N14	0000000


		Digital	1	Standard Banana Socket	1V DC to 32V DC	0 amp to 30 amp	0 W to 960 W	50 mV DC	3.5"	7.9"	10.8"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 32	0 to 5	5774N15	000000
		Digital	1	Standard Banana Socket	1V DC to 60V DC	0 amp to 15 amp	0 W to 900 W	100 mV DC	3.5"	7.9"	10.8"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 60	0 to 5	5774N16	000000


		Single Phase—120, 240V AC Input Voltage



				Digital	1	Standard Banana Socket	1V DC to 18V DC	0 amp to 20 amp	0 W to 360 W	50 mV DC	3.5"	7.9"	8.2"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 18	0 to 5	5774N13	000000


				Digital	1	Standard Banana Socket	1V DC to 36V DC	0 amp to 10 amp	0 W to 360 W	50 mV DC	3.5"	7.9"	8.2"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 36	0 to 5	5774N12	000000
				Digital	1	Standard Banana Socket	1V DC to 60V DC	0 amp to 5 amp	0 W to 300 W	50 mV DC	3.5"	7.9"	8.2"	Over Temperature, Overcurrent, Overload, Overvoltage	Back	Constant Current, Constant Voltage	1 to 60	0 to 5	5774N11	000000

Bench-Mount Power Supplies

Convert AC voltage into the DC voltages needed to test, design, and prototype a wide variety of electrical circuits and equipment. These power supplies let you adjust the output to the exact voltage needed to power your equipment. You can also set limits on the maximum current to protect your equipment from damage. Keep an eye on the voltage and current drawn by your connected components with the digital display.

Since these use switching regulation, they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and won’t become too hot.

When these power supplies convert AC voltage to DC voltage, some noise from the AC voltage will carry into the output. While this won't affect most applications, this noise can interfere with other signals in extremely sensitive applications. The lower the output noise, the less interference it creates.

These power supplies are CE Marked, which means they meet European Union safety standards. If your power supply exceeds the maximum current, voltage, or load, they’ll shut down to protect both the power supply and the connected equipment. Some also protect against excessive temperatures.

Connect the banana plugs on your equipment to the socket output connections.

1 Output Power Connection—Banana Jack Socket

Output Voltage Selector Switch—Power supplies with output voltage selector switch let you choose either an adjustable output, which you control with a dial, or an output fixed at 13.8V DC.

	Output							Front Auxiliary Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Voltage, V DC	Current, amp	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single Phase—120V AC Input Voltage



		Standard Banana Socket	1V DC to 30V DC	1 amp to 20 amp	1 W to 600 W	50 mV DC	Back	Constant Current, Constant Voltage	1 to 30	1 to 5	3.5"	7.9"	8.5"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N16	0000000


		Standard Banana Socket	13.8V DC, 3V DC to 15V DC	40 amp	552 W, 120 W to 600 W	30 mV DC	Front	Constant Current, Constant Voltage, Output Voltage Selector Switch	—	—	4.4"	11.9"	8.6"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N12	000000


		Single Phase—120/240V AC Input Voltage



				Standard Banana Socket	1V DC to 15V DC	60 amp	60 W to 900 W	40 mV DC	Back	Constant Current, Constant Voltage, Remote Signaling	1 to 15	1 to 3	4.3"	8.7"	14.2"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N13	000000


				Standard Banana Socket	1V DC to 30V DC	30 amp	30 W to 900 W	40 mV DC	Back	Constant Current, Constant Voltage, Remote Signaling	1 to 30	1 to 5	4.3"	8.7"	14.2"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N14	000000

2 Output Power Connections—Banana Jack Socket and USB-A Socket

Image of Product. Front orientation. Power Supplies. Bench-Mount Power Supplies, 2 Output Power Connections.

USB-A—Power supplies with USB-A output connections can also charge phones and other devices with USB-A ports. You can use more than one output at the same time, but you can’t adjust them independently—all outputs are set to the voltage you select.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single Phase—120V AC Input Voltage



		Standard Banana Socket USB-A Socket	1V DC to 36V DC 5V DC	0 amp to 3 amp 0.4 amp	0 W to 108 W 2 W	50 mV DC 8 mV DC	Front	Constant Current, Constant Voltage	6"	2.9"	9.9"	Over Temperature, Overcurrent, Overload, Overvoltage	5772N11	0000000

3 Output Power Connections—Banana Jack Socket and Lever-Clamp Terminals

Image of Product. Front orientation. Power Supplies. Bench-Mount Power Supplies, 3 Output Power Connections.

	Output
	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Output Connection Location	Output Features	Ht.	Wd.	Dp.	Electrical Protection Type		Each
Single Phase—120/240V AC Input Voltage



		Standard Banana Socket Lever-Clamp Terminal Lever-Clamp Terminal	0V DC to 30V DC 12V DC 5V DC	0 amp to 5 amp 0.5 amp 0.5 amp	0 W to 150 W 6 W 2.5 W	15 mV DC 15 mV DC 15 mV DC	Front	Constant Current, Constant Voltage	5"	8.5"	11.5"	Overcurrent, Overload, Overvoltage	5772N15	0000000

Desktop Computer Power Supplies


4+4 Pin ATX	20+4 Pin ATX	Floppy-Disk Drive Molex Mini-Fit 4 Pin

PCI-E 6+2 Pin Molex Mini-Fit	Peripheral AMP	Standard SATA

Convert AC voltage to DC voltage to power components inside desktop computers. These power supplies meet ATX industry standards, so they fit into most desktop computers. The higher the energy efficiency of a power supply, the lower the operating costs will be. These power supplies generate enough power for PCs with dedicated graphics cards and computers used for intensive tasks such as video editing and CAD design.

	Output
	Voltage	Current	Power, W	Standby Current @ Voltage	Plug Type (No. of)	Energy Efficiency Rating	Efficiency @ Voltage	Ht.	Wd.	Dp.	Cable Lg., ft.		Each
100V AC to 240V AC Input Voltage



		3.3V DC 5V DC 12V DC	22 amp 17 amp 42 amp	600	2.5 amp @ 5V DC	4+4 Pin ATX (1) 20+4 Pin ATX (1) Floppy-Disk Drive Molex Mini-Fit 4 Pin (3) PCI-E 6+2 Pin Molex Mini-Fit (2) Peripheral AMP (1) Standard ATA Molex Mini-Fit 5 (6)	80 PLUS Bronze	82% @ 115V AC 82% @ 230V AC	3.4"	5.9"	5.5"	2	3737N12	000000

Rack-Mount Power Supplies

With Digital Display

With Analog Display

Mount these power supplies into standard 19”-wide electronics racks, which can hold multiple electronic devices and keep your benchtop clear. These power supplies change AC voltage to DC voltage to power highly sensitive audio, measuring, and testing devices while keeping electronic interference—known as output or ripple noise—from passing on to the device. The lower the output noise value, the less interference the power supplies will create.

Designed with linear voltage regulation, these power supplies produce the same voltage regardless of changes in the input voltage or the amount of current being drawn. They are also known as linear power supplies. As they send power to a device, they use remote voltage sensing to check for any drops in the voltage. If the voltage dips, they can compensate with extra power, so connected devices always receive the correct voltage.

If you exceed the maximum current or load, these power supplies will shut down to protect both the power supply and the connected device.

View the output on a digital or analog display.

Digital Display—Digital displays are often easier to read than analog displays, so you can quickly see if you need to make adjustments.

Analog Display—Analog displays are better than digital displays for monitoring fast output changes, such as dips and spikes.

		Output												Mounting
	Display Type	No. of Power Connections	Connection	Voltage	Current	Power	Max. Noise Peak-to-Peak	Ht.	Wd.	Dp.	Electrical Protection Type	Output Connection Location	Output Features	Fasteners Included	Number of Holes		Each
Single Phase—120, 240V AC Input Voltage



		Digital	1	Standard Banana Socket	0V DC to 20V DC	0 amp to 25 amp	0 W to 500 W	8 mV DC	5.8"	19"	12.8"	Overcurrent, Overload	Front	Constant Current, Constant Voltage, Remote Voltage Sensing	No	4	7686K41	0000000


		Analog	1	Standard Banana Socket	0V DC to 30V DC	0 amp to 12 amp	0 W to 360 W	8 mV DC	5.8"	19"	13.5"	Overcurrent, Overload	Front	Constant Current, Constant Voltage, Remote Voltage Sensing	No	4	7686K28	000000

AC to DC Electromagnet Transformers


	NEMA 5-15 Plug

Flip the switch to reverse the magnetic current and release your electromagnet's hold. Choose a power output wattage equal to or greater than the watts of your electromagnet. These transformers are rated NEMA 12 for protection from oil/coolant dripping.

		Output						Mounting
	Input Voltage, V AC	Voltage, V DC	Power, W	Input No. of Blades (NEMA Type)	Ht.	Wd.	Dp.	Number of Holes	Hole Diameter	Fasteners Included	Housing Material	Max. Temp., ° F		Each
Single Phase—Plug Input and Wire Leads Output Connection







				Step-Down Voltage

				120	12	48	3-Blade (NEMA 5-15)	3 1/2"	6"	4"	4	9/32"	No	Steel	140	57245K75	0000000


				120	24	48	3-Blade (NEMA 5-15)	3 1/2"	6"	4"	4	9/32"	No	Steel	140	57245K85	000000
				120	110	800	3-Blade (NEMA 5-15)	3 1/2"	6"	4"	4	9/32"	No	Steel	140	57245K96	000000

Fixed-Voltage Bench-Mount Power Supplies


	Stud Terminal on Back

No need to adjust the voltage on these power supplies—they’re specifically designed to convert 120V AC to 13.8V DC. This voltage is common in radio transmitters, battery chargers, and automotive electrical systems, so these power supplies are often used to develop and test electronics that will be used in those applications. Since they are not adjustable, there’s no risk of supplying the wrong voltage and damaging your equipment. Power supplies have a stud terminal output connection to work with wire leads. Wrap the wire around the stud and secure with the included nuts, or attach alligator clips to the studs.

These power supplies have linear voltage regulation, which means they produce the same voltage regardless of changes in the input voltage or the amount of current being drawn. They are also known as linear power supplies. They have extremely low noise output, meaning that they keep electronic interference (also known as output noise or ripple noise) from being passed on to your device. However, these power supplies are larger, use more energy, and give off more heat than switching power supplies with a similar output.

If you exceed the maximum load or current, they’ll shut down to protect both the power supply and the connected equipment.

Overvoltage—Power supplies with overvoltage protection will also shut down if you exceed the maximum voltage.

	Output
	No. of Power Connections	Voltage	Current	Power	Max. Noise Peak-to-Peak	Ht.	Wd.	Dp.	Electrical Protection Type	Output Connection Location	Output Features		Each
Single Phase—120V AC Input Voltage







				Stud-Terminal Output Connection

				1	13.8V DC	25 amp	331.2 W	16 mV DC	6.8"	6.3"	10.3"	Overcurrent, Overload, Overvoltage	Back	Constant Voltage	5770N18	0000000


				1	13.8V DC	40 amp	532.3 W	30 mV DC	6.8"	10.5"	11.5"	Overcurrent, Overload, Overvoltage	Back	Constant Voltage	5770N2	000000
				1	13.8V DC	60 amp	780.5 W	28 mV DC	6.8"	10.5"	11.5"	Overcurrent, Overload, Overvoltage	Back	Constant Voltage	5770N22	000000

Sealed Power Supplies


3-Pole M22 Plug Input and 4-Pole M22 Socket Output	3-Pole M22 Plug Input and 5-Pole M22 Socket Output


3-Pole M22 Plug	4-Pole M22 Socket

5-Pole M22 Socket

Completely sealed and protected from dust and water, these power supplies don't need a separate electrical panel or enclosure. Instead, mount them directly to machine tools, process control equipment, conveyors, and other equipment found in harsh industrial areas. They convert AC voltage to deliver DC power right at the point of need, reducing the need for complex wiring.

Rated IP67, all of these power supplies are safe for use in dusty, humid, and wet locations, as well as in applications where the power supply may be briefly submerged in water.

Although sealed in a housing, these power supplies have excellent heat dissipation, so they run reliably even as temperatures rise. They use switching regulation, which means they produce the stated voltage despite fluctuations in your input power and the power being drawn by your system, and they won’t create much heat. Some of these power supplies are also SEMI F47 compliant, which means they meet standards for maintaining output voltage when input voltage dips. This is commonly known as voltage sag immunity.

If you exceed the maximum voltage or load, these power supplies shut down to protect both the power supply and the connected equipment. They also meet the voltage requirements for use in a SELV (separated extra low voltage) circuit. With various domestic and international certifications, such as UL listing and CE marking, you can be sure they meet stringent safety standards.

IP66 Enclosure Rating—IP66-rated power supplies can also withstand frequent washdowns.

Cannot Be Sold to California and Cannot Be Sold to Vermont—Power supplies that cannot be sold to California and Vermont do not meet energy efficiency requirements.

Output Peak Current—Power supplies with an output peak current briefly boost power above their maximum operating current for starting motors, actuating solenoid valves, and other applications that require a higher starting current than their operating current.

Maximum Output Noise Peak-to-Peak—Maximum output noise is also known as ripple noise. The lower the value, the less interference the power supply creates. For most applications, a value over 100mVpp isn’t a problem. However, when using to power extremely sensitive electronics, such as audio equipment and high-precision measuring and testing equipment, you’ll want an output noise around 5mVpp or less.

Power Factor @ Voltage—Power factor shows how effectively a power supply draws AC power from the main electrical supply. The higher the power factor—up to a maximum score of 1—the lower your operating cost.

Efficiency @ Voltage—Efficiency describes how good a power supply is at converting the AC power it draws from your main electrical supply into DC power. High-efficiency power supplies cost less money to operate and produce less heat, meaning cooler temperatures in your electrical cabinet.

	Output
	Voltage, V DC	Current, amp	Peak Current, amp	Peak Current Duration, sec.	Power, W	Max. Noise Peak-to-Peak, mV DC	No. of Output Connections per Circuit	Power Factor @ Voltage	Efficiency @ Voltage	Ht.	Wd.	Dp.	Enclosure Rating	Cannot Be Sold To		Each
Single Phase—90-265V AC Input Voltage







				3-Pole M22 Plug Input and 5-Pole M22 Socket Output

				24	4	6	4	96	300	1	0.98 @ 230V AC	91.7% @ 115V AC 92.4% @ 230V AC	2.1"	4.4"	5.6"	IP67	California, Vermont	3580N15	0000000


				24	8	12	4	96	300	1	0.95 @ 230V AC	93% @ 115V AC 94.2% @ 230V AC	2.1"	4.4"	6.9"	IP67	California, Vermont	3580N16	000000


				Single Phase—100-240V AC Input Voltage







								3-Pole M22 Plug Input and 4-Pole M22 Socket Output

								24	3.8	—	—	100	50	1	0.9 @ 230V AC	84% @ 115V AC 84% @ 230V AC	1.9"	7.2"	4.9"	IP66, IP67	California, Vermont	3580N13	000000


								24	7.6	—	—	100	50	4	0.9 @ 230V AC	85% @ 115V AC 85% @ 130V AC	3.4"	7.2"	4.9"	IP66, IP67	California, Vermont	3580N14	00000000