We will reply to your message within an hour.
Rechargeable batteries keep these tools powered wherever you need them.
Adjust the nosepiece to set the depth and prevent fasteners from being driven too deep. These drivers are good for use with soft materials such as wood, fiberboard, drywall, and insulation board. They are powered by rechargeable batteries.
Connect these tools to your shop air to install and remove fasteners.
Set torque and the clutch slips to prevent you from exceeding it.
The motor shuts off when the set torque is reached to prevent overtightening and damaging fasteners. These tools provide the most torque control of any electric screwdriver.
The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver.
These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Connect these powerful tools to your shop air. They hammer as they rotate to drive screws quickly, even through thick or dense material.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
A magnet holds the socket, making changes quicker.
Pivot the head to access fasteners from an angle.
Pull the collar to quickly attach and remove sockets.
Convert from one square drive size to another.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.
Use these wrenches for medium-volume production, general maintenance, and construction applications.
These tools are suitable for general shop, maintenance, and automotive work.
Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.
Use these tools for general shop applications.
Just twist the collar ring and these Makita drills change from a standard cordless drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.
Just twist the collar ring and these DeWalt drills change from a standard cordless drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.
Just twist the collar ring and these Milwaukee drills change from a standard cordless drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.
A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with cordless hammer drills.
With a powerful motor, these drills have the strength for big drilling and mixing applications. Their top handle provides additional leverage and stability, and a rear D-handle makes them easy to carry.
Get a better angle when drilling into hard-to-reach spaces with these DeWalt angle-head drills.
Get a better angle when drilling into hard-to-reach spaces with these Milwaukee angle-head drills.
Get a better angle when drilling into hard-to-reach spaces with these Makita angle-head drills.
Push a switch and these Bosch drills change from a standard electric drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.
Push a switch and these DeWalt drills change from a standard electric drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.
A deeper drive system minimizes wobble for straighter, more accurate holes and better overall performance to other rotary hammers. For use with SDS-Max drill bits.
Designed to drill larger holes than a SDS-drive hammer. For use with spline-shank drill bits.
Also known as SDS-Plus rotary hammers, these are lightweight and ideal for overhead work and drilling smaller holes. For use with SDS-Plus drill bits.
Get the tools you need in an easy-to-carry DeWalt combination kit.
Designed for intermittent use.
More durable than our light duty drills, these are excellent for general purpose drilling jobs.
These drills have a threaded spindle instead of a drill chuck for use with threaded-shank drill bits. Rated for continuous use, they have heavy duty bearings and hardened steel gears.
Rated for continuous use, these tools take on your tough drilling jobs. They have heavy duty bearings and hardened steel gears.
Powered by compressed air, these tap wrenches thread holes faster and with less effort than manual tap wrenches.
Thread, cut, and ream pipe and conduit with these machines.
These machines thread faster than the Ridgid 300 and include a self-lubricating die head and automatic chuck.
Tell your stepper motor how far and fast to go by adding a controller and driver to your system.
Send electricity to LED lights while protecting them from voltage and current fluctuations.
Plug these power feeds into standard outlets to convert a milling machine from manual feed to motorized power.