Motorized Round-Groove Conveyor Rollers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/225/2250t831-@halfx_1686169852.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/229/2298t712c1-e01d-digital-master1552077994-p9@halfx_636598984642140000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
Also known as drive rollers, these connect to rollers with two grooves to power conveyors. The bearings are quiet-rolling to reduce conveyor noise and are shielded to keep out dirt and debris.
For Between Frame Wd. | For Belt Dia. | Roller Wd. | Cap., lbs. | Wire Lead Lg. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | O'all Wd. | Includes | Choose a Speed | Each | |
24V DC—Duty Cycle is Continuous with Up to 30 Starts and Stops per Minute | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
7/16" Hex Axle—1.9" Dia. Galvanized Steel Roller | |||||||||||
13" | 3/16" | 12.88" | 70 | 19" | 2.31" | 1 1/4" | 14" | Zone Control Card | 0000000 | 0000000 | |
16" | 3/16" | 15.888" | 70 | 19" | 2.31" | 1 1/4" | 17" | Zone Control Card | 00000000 | 000000 | |
21" | 3/16" | 20.88" | 70 | 19" | 2.31" | 1 1/4" | 22" | Zone Control Card | 00000000 | 000000 | |
22" | 3/16" | 21.88" | 70 | 19" | 2.31" | 1 1/4" | 23" | Zone Control Card | 00000000 | 000000 | |
27" | 3/16" | 26.88" | 70 | 19" | 2.31" | 1 1/4" | 28" | Zone Control Card | 00000000 | 000000 | |
31" | 3/16" | 30.88" | 70 | 19" | 2.31" | 1 1/4" | 32" | Zone Control Card | 00000000 | 000000 | |
120V AC (Single Phase)—Duty Cycle is 3 Seconds On, 2 Seconds Off | |||||||||||
7/16" Hex Axle—1.9" Dia. Zinc-Plated Steel Roller | |||||||||||
13" | 3/16" | 12 7/16" | 120 | 2" | 2.17" | 1.3" | 14 1/16" | Terminal Block | 0000000 | 000000 | |
21" | 3/16" | 20 7/16" | 75 | 2" | 2.17" | 1.3" | 22 1/16" | Terminal Block | 0000000 | 000000 |
1.9" Diameter Motorized Conveyor Rollers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/171/1711n1p3-e01d-digital@halfx_636876637516202666.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
Add power to a gravity conveyor or build a custom powered conveyor. Rollers can be hardwired to operate in either direction. They have shielded bearings to keep out dust and debris.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Between Frame Wd. | Wd. | Gauge | Cap., lbs. | O'all Wd. | Wire Lead Lg. | Includes | Choose a Speed, fpm | Each | |
120V AC (Single Phase)—Duty Cycle is Continuous | |||||||||
7/16" Hex Axle—1.9" Dia. Zinc-Plated Steel Roller | |||||||||
13" | 12 3/8" | 17 | 140 | 14 1/4" | 2" | Terminal Block | 0000000 | 0000000 | |
16" | 15 3/8" | 17 | 140 | 17 1/4" | 2" | Terminal Block | 0000000 | 000000 | |
22" | 21 7/16" | 17 | 95 | 23 1/4" | 2" | Terminal Block | 0000000 | 000000 |
Motorized Roller Conveyors
Also known as line-shaft conveyors, these are driven by a drive shaft and round belts. The drive shaft continues to run even when the accumulation of packages may cause some rollers to stop turning. Conveyors can be hardwired for material flow in either direction. Only straight conveyor sections contain a motor and can power up to 60 ft. of conveyor extensions on either side.
90° curved conveyor extensions have tapered rollers that keep packages centered.
Note: Capacities are based on an evenly distributed load. Use a stand at each end for straight conveyors and extensions. Add an additional stand in the center to increase capacity. For 90° curved conveyor extensions, use a stand at each end plus a stand in the center. Connected conveyor sections share a stand. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k11p1l_6345162942600000001553890281@halfx_636894723146022413.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
Wd. | Roller | Ht. | No. of Stands | 3 ft. Lg. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Spacing | Projection | Frame | O'all | Voltage | Motor Phase | Power, hp | Speed, fpm | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 000000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 240V AC/460V AC | Three | 1/2 | 60 | 60 | 2 | 2 | Connecting Plates | 0000000 | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k12c1-e01d-digital-master1552078047-p9@halfx_636598985960520000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
Wd. | Roller | Ht. | |||||||
---|---|---|---|---|---|---|---|---|---|
O'all Wd. | Between Frame | Spacing | Projection | Frame | O'all | Cap., lbs./ft. | Features | Each | |
5 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 0000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
7 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
10 ft. Lg. | |||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||
16" | 13" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
19" | 16" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 3" | 1/4" | 5 1/2" | 36"-48" | 60 | Connecting Plates | 0000000 | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18p1-e01d-digital@halfx_636876649296640037.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18--248003798341557324557-p9@halfx_636929033594695634.png?ver=imagenotfound)
Wd. | Ht. | No. of Stands | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Roller Projection | Frame | O'all | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||
16" | 13" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 000000000 |
19" | 16" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k781p1-e01d-digital@halfx_636876691706584155.png?ver=imagenotfound)
Conveyor Mount. Slot | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Floor Mount. Hole Dia. | Each | |
For 16" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 0000000 |
For 19" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
For 25" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
For 35" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
Bench-Top Roller Conveyors
Designed to rest on a work surface, these conveyors have two sets of axle holes so you can position the conveying surface 1/8" above the frame or 3/4" below the frame (position below to use the frame as a guide rail).
Galvanized steel conveyors are stronger than aluminum and have some corrosion resistance.
Aluminum conveyors are lightweight and corrosion resistant.
Note: Capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/567/5677k44p1-e01d-digital@halfx_636876691086586710.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/567/5677k44p1-master1552078123-p9@halfx_636693386832307960.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
Wd. | Roller | 5 ft. Lg. | 10 ft. Lg. | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Spacing | Projection | Dp. Below Frame | Frame Ht. | Cap., lbs./ft. | Each | Cap., lbs./ft. | Each | ||
3/4" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||||||
5 3/4" | 4 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 0000000 | 35 | 0000000 | 0000000 |
11 1/4" | 10 3/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 000000 | 35 | 0000000 | 00000000 |
14 3/4" | 13 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 000000 | 35 | 0000000 | 00000000 |
3/4" Dia. Aluminum Rollers—1/4" Round Axle | |||||||||||
5 3/4" | 4 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 | 0000000 | 000000 | 25 | 0000000 | 000000 |
11 1/4" | 10 3/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 | 0000000 | 000000 | 25 | 0000000 | 00000000 |
14 3/4" | 13 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 | 0000000 | 000000 | 25 | 0000000 | 00000000 |
Abrasion-Resistant Bench-Top Roller Conveyors
![]() | ![]() |
![]() |
Push glass, painted objects, and other delicate material from one workstation to the next. These conveyors rest on a flat surface instead of a stand, and they have PVC rollers that won’t mark or dent your material. They have two sets of axle holes for the rollers, so you can position the conveying surface 1/8" above the frame or 3/4" below. The frame serves as a guide rail when rollers are mounted below it.
Note: Capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Wd. | Roller | 5 ft. Lg. | 10 ft. Lg. | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Spacing | Projection | Dp. Below Frame | Frame Ht. | Cap., lbs./ft. | Each | Cap., lbs./ft. | Each | ||
0.78" Dia. PVC Plastic Rollers—1/4" Round Axle | |||||||||||
5" | 4" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 0000000 | 35 | 0000000 | 0000000 |
9" | 8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 000000 | 35 | 0000000 | 00000000 |
13" | 12" | 1" | 1/8" | 3/4" | 2 1/2" | 120 | 0000000 | 000000 | 35 | 0000000 | 00000000 |