Filter by
DFARS Compliance
Certification
About Powered Nibblers and Powered Cutters
More
Electric Sheet Metal Nibblers
A
B
C
D
Cutting Pattern -
Straight, Right
Curves, Left Curves
Straight, Right
Curves, Left Curves
Punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
Style D can also cut aluminum with the punch, die, and stripper for use on aluminum (sold separately).
Nibblers that comply with OSHA 29 CFR 1910.243 meet standards for hand-held equipment. Nibblers that meet OSHA Compliant 29 CFR 1926.302 fulfill requirements for power-operated hand tools.
For Max. Thick. | Material | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Voltage | Current, A | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | ||||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin | ||||||||||||||||
| 1/16" | 3/64" | 7/64" | 1/4" | 1 3/4" | 10 1/4" | Steel | Polycarbonate | 2,200 | 74 | 1/2" | Corrugated, Flat | Push Button | 120V DC | 5 | 0000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 1/8" | 3/32" | 5/64" | 0.24" | 2 1/2" | 12 1/4" | Steel | Magnesium | 1,000 | 105 | 1 21/32" | Corrugated, Flat | Toggle | 120V DC 120V AC | 4 | 0000000 | 00000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 11/64" | 1/8" | 3/16" | 0.21" | 6" | 13" | Steel | Aluminum | 260 | 48 | 2 1/2" | Flat | Trigger with Lock | 110V AC | 3-5 | 0000000 | 00000000 |
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 8" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | 0000000 | 00000000 |
Cutting Pattern—Straight | ||||||||||||||||
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 32" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | 000000 | 00000000 |
Dies | |||
|---|---|---|---|
| Replacement Die for Style A | 00000000 | Each | 000000 |
| Replacement Die for Style C | 0000000 | Each | 00000 |
| Replacement Die for Style B | 0000000 | Each | 000000 |
| Replacement Die for Style D | 0000000 | Each | 00000 |
| Optional Die for Style D (Required for cutting aluminum) | 0000000 | Each | 00000 |
Punches | |||
|---|---|---|---|
| Replacement Punch for Style A | 00000000 | Each | 000000 |
| Replacement Punch for Style C | 0000000 | Each | 00000 |
| Replacement Punch for Style B | 0000000 | Each | 00000 |
| Replacement Punch for Style D | 0000000 | Each | 00000 |
| Optional Punch for Style D (Required for cutting aluminum) | 0000000 | Each | 00000 |
| Optional Punch for Style D (Recommended for cutting stainless steel) | 0000000 | Each | 00000 |
Strippers | |||
|---|---|---|---|
| Replacement Stripper for Style C | 00000000 | Each | 000000 |
| Optional Stripper for Style D (Required for cutting aluminum) | 0000000 | Each | 000000 |
| Replacement Stripper for Style D | 00000000 | Each | 000000 |
Cords | |||
|---|---|---|---|
| Replacement Cord for Style C | 00000000 | Each | 000000 |
| Replacement Cord for Style B | 0000000 | Each | 00000 |
| Replacement Cord for Style D | 00000000 | Each | 00000 |
Switches | |||
|---|---|---|---|
| Replacement Toggle Switch for Style B | 0000000 | Each | 000000 |
Die Holders | |||
|---|---|---|---|
| Replacement Die Holder for Style B | 0000000 | Each | 0000000 |
Assembly Screws | |||
|---|---|---|---|
| Replacement Assembly Screw for Style D | 00000000 | Each | 00000 |
Grease Fittings | |||
|---|---|---|---|
| Replacement Grease Fitting for Style D | 00000000 | Each | 00000 |
Bearings | |||
|---|---|---|---|
| Replacement Bearing for Style D | 00000000 | Each | 000000 |
Air-Powered Sheet Metal Nibblers
A
B
C
D
Cutting Pattern -
Straight, Right
Curves, Left Curves
Straight, Right
Curves, Left Curves
These nibblers punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Air Consumption, cfm | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin, Plastic | |||||||||||||||
| 3/64" | __ | 1/32" | 1/4" | 1/4" | 7 1/16" | Steel | Aluminum | 3,200 | 62 | 1/2" | Corrugated | Lever | 21 | 00000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Steel, Tin | |||||||||||||||
| 3/64" | __ | 3/64" | 3/16" | 3/16" | 7" | Steel | Plastic | 2,600 | 46.5 | 5/8" | Corrugated | Lever | 4 | 0000000 | 000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 3/32" | 5/64" | 1/8" | 1/4" | 2" | 12" | Steel | Aluminum | 192 | 55 | 1 1/2" | Corrugated, Flat | Lever | 27 | 000000 | 000000 |
Cutting Pattern—Straight | |||||||||||||||
(D) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 11/64" | 1/8" | 11/64" | 3/16" | 6" | 12" | Steel | Aluminum | 192 | 48 | 2 1/2" | Flat | Trigger with Lock | 21-23 | 00000000 | 00000000 |
Punch Cutter Attachment for Portable Drills
With Drill (Not Included)
Cutting Pattern -
Straight, Right
Curves, Left Curves
Straight, Right
Curves, Left Curves
Turn your portable drill into a punch cutter for cutting curved and straight shapes in flat and corrugated sheet metal and plastic. To start cuts in the center of material, drill a starting hole.
Punch Cutter | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Punches | |||||||||||||
| Steel | Stainless Steel | Aluminum | Min. Cut Radius | Overall Lg. | For Max. Drill Speed, rpm | Shank Size | Shank Shape | Punch Material | Housing Material | Starting Hole Dia. | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||
| 1/32" | 1/32" | 1/32" | 3/16" | 5 5/8" | 3,000 | 1/4" | Hex | Steel | Plastic | 1/2" | 0000000 | 0000000 | 0000000 | 000000 |