Filter by
Product Family
Between Frame Width
Overall Width
Width
Speed
Axle Grip Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Ball Bearing Material
Motorized Roller Conveyors
Fixed Speed Straight Conveyor
 |  |  |
Replacement Stands |
Fixed-speed conveyors travel at 60 fpm, a common industry rate, to move material.
Three-Phase Motor—Conveyors with three-phase motors balance power more evenly than single-phase motors, so they can handle heavier loads. While a conveyor with a single-phase motor may lag when a heavy load reaches the conveyor, a conveyor with a three-phase motor will continue smoothly.
Wd. | Roller | Ht. | 3 ft. Long | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Spacing | Projection | Frame | Overall | Power, hp | Speed, fpm | No. of Stands Included | Features | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | |||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||||||
120V AC—Single-Phase Motor (Plug In) | ||||||||||||||
| 16" | 13" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K301 | 000000000 | ||
| 17" | 14" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K302 | 00000000 | ||
| 19" | 16" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K303 | 00000000 | ||
| 21" | 18" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K304 | 00000000 | ||
| 25" | 22" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K305 | 00000000 | ||
| 29" | 26" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K306 | 00000000 | ||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K307 | 00000000 | ||
| 35" | 32" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K308 | 00000000 | ||
| 41" | 38" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 5898K309 | 00000000 | ||
240/460V AC—Three-Phase Motor (Hardwire) | ||||||||||||||
| 16" | 13" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K11 | 00000000 | ||
| 17" | 14" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K201 | 00000000 | ||
| 19" | 16" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K21 | 00000000 | ||
| 21" | 18" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K202 | 00000000 | ||
| 25" | 22" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K31 | 00000000 | ||
| 29" | 26" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K203 | 00000000 | ||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K204 | 00000000 | ||
| 35" | 32" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K81 | 00000000 | ||
| 41" | 38" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 60 | 2 | Connecting Plates | 40 lb/ft (2) | 5898K205 | 00000000 | ||
Variable Speed Straight Conveyor
 | |  |
Replacement Stands |
Variable-speed conveyors adjust from standard conveyor speeds down to 25 fpm, so they’re often used to slow material flow for quality checks.
Wd. | Roller | Ht. | 3 ft. Long | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Spacing | Projection | Frame | Overall | Power, hp | Speed, fpm | No. of Stands Included | Features | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | |||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||||||
120V AC—Single-Phase Motor (Plug In) | ||||||||||||||
| 16" | 13" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N11 | 000000000 | ||
| 17" | 14" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N12 | 00000000 | ||
| 19" | 16" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N13 | 00000000 | ||
| 21" | 18" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N14 | 00000000 | ||
| 25" | 22" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N15 | 00000000 | ||
| 29" | 26" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N16 | 00000000 | ||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N17 | 00000000 | ||
| 35" | 32" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N18 | 00000000 | ||
| 41" | 38" | 3" | 1/4" | 5 1/2" | 36" to 48" | 1/2 | 25 to 60 | 2 | Connecting Plates, On/Off Switch | 40 lb/ft (2) | 7532N19 | 00000000 | ||
Conveyor Extension
 | |  |
Replacement Stands |
Wd. | Roller | Ht. | 3 ft. Long | 4 ft. Long | 5 ft. Long | 7 ft. Long | 8 ft. Long | 10 ft. Long | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Spacing | Projection | Frame | Overall | Wt. Cap. per Lg., lb/ft | Features | Each | Each | Each | Each | Each | Each | ||||||||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | |||||||||||||||||||||
| 16" | 13" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K401 | 0000000 | 5898K411 | 0000000 | 5898K12 | 0000000 | 5898K13 | 000000000 | 5898K421 | 000000000 | 5898K14 | 000000000 | ||
| 17" | 14" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K402 | 000000 | 5898K412 | 000000 | 5898K431 | 000000 | 5898K436 | 00000000 | 5898K422 | 00000000 | 5898K442 | 00000000 | ||
| 19" | 16" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K403 | 000000 | 5898K413 | 000000 | 5898K22 | 000000 | 5898K23 | 00000000 | 5898K423 | 00000000 | 5898K24 | 00000000 | ||
| 21" | 18" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K404 | 000000 | 5898K414 | 000000 | 5898K432 | 000000 | 5898K437 | 00000000 | 5898K424 | 00000000 | 5898K443 | 00000000 | ||
| 25" | 22" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K405 | 000000 | 5898K415 | 000000 | 5898K32 | 000000 | 5898K33 | 00000000 | 5898K425 | 00000000 | 5898K34 | 00000000 | ||
| 29" | 26" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K406 | 000000 | 5898K416 | 000000 | 5898K433 | 00000000 | 5898K438 | 00000000 | 5898K426 | 00000000 | 5898K444 | 00000000 | ||
| 31" | 28" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K407 | 000000 | 5898K417 | 000000 | 5898K434 | 00000000 | 5898K439 | 00000000 | 5898K427 | 00000000 | 5898K445 | 00000000 | ||
| 35" | 32" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K408 | 000000 | 5898K418 | 000000 | 5898K82 | 00000000 | 5898K83 | 00000000 | 5898K428 | 00000000 | 5898K84 | 00000000 | ||
| 41" | 38" | 3" | 1/4" | 5 1/2" | 36" to 48" | 40 | Connecting Plates | 5898K409 | 000000 | 5898K419 | 000000 | 5898K435 | 00000000 | 5898K441 | 00000000 | 5898K429 | 00000000 | 5898K446 | 00000000 | ||
90° Curved Conveyor
 |
 |
|
 |
Replacement Stands |
Wd. | Ht. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Radius | Roller Projection | Frame | Overall | Wt. Cap. Per Lg. (No. of Stands Req.) | No. of Stands Included | Features | Each | |||
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||||
| 16" | 13" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K18 | 000000000 | ||
| 17" | 14" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K501 | 00000000 | ||
| 19" | 16" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K28 | 00000000 | ||
| 21" | 18" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K502 | 00000000 | ||
| 25" | 22" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K38 | 00000000 | ||
| 29" | 26" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K503 | 00000000 | ||
| 31" | 28" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K504 | 00000000 | ||
| 35" | 32" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K85 | 00000000 | ||
| 41" | 38" | 36" | 1/4" | 5 1/2" | 36" to 48" | 40 lb/ft (3) | 1 | Connecting Plates | 5898K505 | 00000000 | ||
Heavy Duty Motorized Roller Conveyors
 |
Move pallets, drums, racks, and other heavy items around your facility with these conveyors. Also known as chain-driven live roller conveyors, they have sprocketed rollers connected to a drive chain to move heavy loads. The sprockets minimize slipping, so these conveyors can smoothly move loads that are four times heavier than what you can move with our standard motorized roller conveyors. All have an adjustable speed range that goes as slow as 15 fpm, so you can slow material down to perform quality checks.
Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
Variable Speed Straight Conveyor
 |  |
Wd. | 5 ft. Long | 10 ft. Long | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Roller Chain Trade No. | Roller Spacing | Frame Ht. | Power, hp | Speed, fpm | No. of Stands Included | Features | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | ||||
2 1/2" Dia. Steel Rollers—11/16" Hex Axle | ||||||||||||||||
120V AC—Three-Phase Motor (Plug In) | ||||||||||||||||
| 60 1/4" | 47" | 60 | 4 1/2" | 6" | 1 1/2 | 15 to 60 | 0 | Chain Guard, On/Off Switch | 290 lb/ft (2) | 5886N11 | 000000000 | 290 lb/ft (3) | 5886N12 | 000000000 | ||
| 60 1/4" | 47" | 60 | 6" | 6" | 1 1/2 | 15 to 60 | 0 | Chain Guard, On/Off Switch | 290 lb/ft (2) | 5886N13 | 00000000 | 290 lb/ft (3) | 5886N14 | 00000000 | ||
| 68 1/4" | 55" | 60 | 4 1/2" | 6" | 1 1/2 | 15 to 60 | 0 | Chain Guard, On/Off Switch | 290 lb/ft (2) | 5886N15 | 00000000 | 290 lb/ft (3) | 5886N16 | 00000000 | ||
| 68 1/4" | 55" | 60 | 6" | 6" | 1 1/2 | 15 to 60 | 0 | Chain Guard, On/Off Switch | 290 lb/ft (2) | 5886N17 | 00000000 | 290 lb/ft (3) | 5886N18 | 00000000 | ||
Conveyor Extension
 | |
Conveyor extensions expand the length of your set up. Add extensions to each side, but the drive section must remain at the center of the conveyor’s length. Extend conveyors with 4 1/2" roller spacing up to 50 feet long and conveyors with 6" roller spacing up to 70 feet long.
Wd. | 5 ft. Long | 10 ft. Long | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Roller Chain Trade No. | Roller Spacing | Frame Ht. | No. of Stands Included | Features | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | ||||
2 1/2" Dia. Steel Rollers—11/16" Hex Axle | ||||||||||||||
| 51 1/2" | 43" | 60 | 4 1/2" | 6" | 0 | Chain Guard | 290 lb/ft (1) | 5886N101 | 000000000 | 290 lb/ft (2) | 5886N102 | 000000000 | ||
| 51 1/2" | 43" | 60 | 6" | 6" | 0 | Chain Guard | 290 lb/ft (1) | 5886N103 | 00000000 | 290 lb/ft (2) | 5886N104 | 00000000 | ||
| 59 1/2" | 51" | 60 | 4 1/2" | 6" | 0 | Chain Guard | 290 lb/ft (1) | 5886N105 | 00000000 | 290 lb/ft (2) | 5886N106 | 00000000 | ||
| 59 1/2" | 51" | 60 | 6" | 6" | 0 | Chain Guard | 290 lb/ft (1) | 5886N107 | 00000000 | 290 lb/ft (2) | 5886N108 | 00000000 | ||
Stationary Stand
 |
Stands adjust in height for a flexible conveyor set up.
Conveyor Mounting Slot | Floor Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Height | Material | Color | Conveyor Mounting Fasteners Included | No. of Conveyor Mounting Holes | Lg. | Wd. | Conveyor Mounting Hole Ctr.-to-Ctr. | Fasteners Included | No. of Holes | Hole Dia. | Each | |||
For 43" Between Frame Width | ||||||||||||||
| 12" to 14 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N201 | 0000000 | ||
| 14" to 18 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N202 | 000000 | ||
| 19" to 27 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N203 | 000000 | ||
| 25" to 37 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N204 | 000000 | ||
For 51" Between Frame Width | ||||||||||||||
| 12" to 14 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N205 | 000000 | ||
| 14" to 18 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N206 | 000000 | ||
| 19" to 27 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N207 | 000000 | ||
| 25" to 37 5/8" | Powder-Coated Steel | Blue | Yes | 4 | 1" | 7/16" | 3" | No | 2 | 9/16" | 5886N208 | 000000 | ||
Motorized Round-Groove Conveyor Rollers
24V DC—Continuous Duty Cycle with Up to 30 Starts and Stops per Minute
 | |
Hex Axle Galvanized Steel Rollers |
Roller | Bearing | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Between Frame Wd. | For Belt Dia. | Wd. | Ga. | Wt. Cap., lb. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | Overall Wd. | Wire Lead Lg. | Seal Type | Material | Temp. Range, ° F | Features | Includes | Choose a Speed, fpm | Each | |||
7/16" Hex Axle | ||||||||||||||||||
1.9" Dia. Galvanized Steel Rollers | ||||||||||||||||||
| 13" | 3/16" | 12.88" | 16 | 70 | 2.50" | 1.3" | 14" | 19" | Shielded | Steel | 32 to 100 | Integrated Current-Limiting Circuit, Quiet-Rolling Bearings | Zone Control Card | 4 to 70, 6 to 114, 8 to 163 | 2250T45 | 0000000 | ||
| 16" | 3/16" | 15.888" | 16 | 70 | 2.50" | 1.3" | 17" | 19" | Shielded | Steel | 32 to 100 | Integrated Current-Limiting Circuit, Quiet-Rolling Bearings | Zone Control Card | 4 to 70, 6 to 114, 8 to 163 | 2250T463 | 000000 | ||
| 21" | 3/16" | 20.88" | 16 | 70 | 2.50" | 1.3" | 22" | 19" | Shielded | Steel | 32 to 100 | Integrated Current-Limiting Circuit, Quiet-Rolling Bearings | Zone Control Card | 4 to 70, 6 to 114, 8 to 163 | 2250T467 | 000000 | ||
| 22" | 3/16" | 21.88" | 16 | 70 | 2.50" | 1.3" | 23" | 19" | Shielded | Steel | 32 to 100 | Integrated Current-Limiting Circuit, Quiet-Rolling Bearings | Zone Control Card | 4 to 70, 6 to 114, 8 to 163 | 2250T472 | 000000 | ||
| 27" | 3/16" | 26.88" | 16 | 70 | 2.50" | 1.3" | 28" | 19" | Shielded | Steel | 32 to 100 | Integrated Current-Limiting Circuit, Quiet-Rolling Bearings | Zone Control Card | 4 to 70, 6 to 114, 8 to 163 | 2250T473 | 000000 | ||
| 31" | 3/16" | 30.88" | 16 | 70 | 2.50" | 1.3" | 32" | 19" | Shielded | Steel | 32 to 100 | Integrated Current-Limiting Circuit, Quiet-Rolling Bearings | Zone Control Card | 4 to 70, 6 to 114, 8 to 163 | 2250T561 | 000000 | ||
120V AC (Single-Phase Motor)—3 Seconds On, 2 Seconds Off Duty Cycle
 | |
Hex Axle Zinc-Plated Steel Rollers |
Roller | Bearing | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Between Frame Wd. | For Belt Dia. | Wd. | Ga. | Wt. Cap., lb. | Bearing-to-Groove Wd. | Groove Ctr.-to-Ctr. Wd. | Overall Wd. | Wire Lead Lg. | Seal Type | Material | Temp. Range, ° F | Features | Includes | Choose a Speed, fpm | Each | |||
7/16" Hex Axle | ||||||||||||||||||
1.9" Dia. Zinc-Plated Steel Rollers | ||||||||||||||||||
| 13" | 3/16" | 12 7/16" | 16 | 120 | 2.17" | 1.3" | 14 1/16" | 2" | Shielded | Steel | 14 to 100 | Quiet-Rolling Bearings | Terminal Block | 33, 53, 67 | 2298T21 | 0000000 | ||
| 21" | 3/16" | 20 7/16" | 16 | 75 | 2.17" | 1.3" | 22 1/16" | 2" | Shielded | Steel | 14 to 100 | Quiet-Rolling Bearings | Terminal Block | 33, 53, 67 | 2298T22 | 000000 | ||
Abrasion-Resistant Bench-Top Roller Conveyors
Straight Conveyor
 |
 |
|
Wd. | Roller | 5 ft. Long | 10 ft. Long | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Spacing | Projection | Dp. Below Frame | Frame Ht. | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | ||||
0.78" Dia. PVC Rollers—1/4" Dia. Round Axle | |||||||||||||
| 5" | 4" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5696N11 | 0000000 | 35 lb/ft (0) | 5696N14 | 0000000 | ||
| 9" | 8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5696N12 | 000000 | 35 lb/ft (0) | 5696N15 | 00000000 | ||
| 13" | 12" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5696N13 | 000000 | 35 lb/ft (0) | 5696N16 | 00000000 | ||
1.9" Diameter Motorized Conveyor Rollers
120V AC (Single-Phase Motor)—Continuous Duty
 | |
Roller | Bearing | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Between Frame Wd. | Wd. | Ga. | Wt. Cap., lb. | Overall Wd. | Wire Lead Lg. | Seal Type | Material | Temp. Range, ° F | Includes | Choose a Speed, fpm | Each | |||
7/16" Hex Axle | ||||||||||||||
1.9" Dia. Zinc-Plated Steel Rollers | ||||||||||||||
| 13" | 12 3/8" | 17 | 140 | 14 1/4" | 2" | Shielded | Zinc-Plated Steel | 15 to 100 | Terminal Block | 33, 53, 67 | 1711N21 | 0000000 | ||
| 16" | 15 3/8" | 17 | 140 | 17 1/4" | 2" | Shielded | Zinc-Plated Steel | 15 to 100 | Terminal Block | 33, 53, 67 | 1711N22 | 000000 | ||
| 22" | 21 7/16" | 17 | 95 | 23 1/4" | 2" | Shielded | Zinc-Plated Steel | 15 to 100 | Terminal Block | 33, 53, 67 | 1711N23 | 000000 | ||
Bench-Top Roller Conveyors
Straight Conveyor
 |  | |
Galvanized Steel Rollers—Conveyors with galvanized steel rollers are stronger than aluminum and have some corrosion resistance.
Aluminum Rollers—Conveyors with aluminum rollers are lightweight and corrosion resistant.
Wd. | Roller | 5 ft. Long | 10 ft. Long | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Between Frame | Spacing | Projection | Dp. Below Frame | Frame Ht. | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | ||||
3/4" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle | |||||||||||||
| 5 3/4" | 4 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5677K75 | 0000000 | 35 lb/ft (0) | 5677K65 | 0000000 | ||
| 5 3/4" | 4 7/8" | 2" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5677K11 | 000000 | 35 lb/ft (0) | 5677K12 | 000000 | ||
| 11 1/4" | 10 3/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5677K76 | 000000 | 35 lb/ft (0) | 5677K66 | 00000000 | ||
| 11 1/4" | 10 3/8" | 2" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5677K21 | 000000 | 35 lb/ft (0) | 5677K22 | 000000 | ||
| 14 3/4" | 13 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5677K77 | 000000 | 35 lb/ft (0) | 5677K67 | 00000000 | ||
| 18 3/4" | 17 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 120 lb/ft (0) | 5677K78 | 000000 | 35 lb/ft (0) | 5677K68 | 00000000 | ||
3/4" Dia. Aluminum Rollers—1/4" Dia. Round Axle | |||||||||||||
| 5 3/4" | 4 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 lb/ft (0) | 5677K44 | 000000 | 25 lb/ft (0) | 5677K35 | 000000 | ||
| 11 1/4" | 10 3/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 lb/ft (0) | 5677K54 | 000000 | 25 lb/ft (0) | 5677K36 | 000000 | ||
| 14 3/4" | 13 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 lb/ft (0) | 5677K64 | 000000 | 25 lb/ft (0) | 5677K37 | 000000 | ||
| 18 3/4" | 17 7/8" | 1" | 1/8" | 3/4" | 2 1/2" | 100 lb/ft (0) | 5677K74 | 000000 | 25 lb/ft (0) | 5677K38 | 00000000 | ||
Ready-to-Run Flexible Roller Conveyors
Variable Speed Flexible Conveyor
 | |
 |
 |
Replacement Rollers |
Conveyors | Replacement Rollers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Roller | 102" to 288" Long | Roller | |||||||||||||
Overall | Between Frame | Spacing | Projection | Overall Ht. | Power, hp | Speed, fpm | Features | Wt. Cap. Per Lg. (No. of Stands Req.) | Each | Wd. | Ga. | Each | ||||
1 1/2" Dia. Zinc-Plated Steel Rollers—1/2" Dia. Round Axle | ||||||||||||||||
120V AC— Plug In | ||||||||||||||||
| 34" | 30" | 5" | 1/4" | 30" to 42" | 1/8 | 0 to 120 | Package Stop, Connecting Hooks, Emergency Stop, Handles, On/Off Switch, Sensor | 145 lb/ft (0) | 4910N11 | 0000000000 | 28 15/32" | 16 | 4910N12 | 000000 | ||
