McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Type
    Industrial Info Compare
    Thread Spacing
    Industrial Info Compare
    Shaft Type
    For Minimum Length Between Hole Center and Sheet Edge
    Head Diameter
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    312 Products

    Press-Fit Studs
    3D CAD models available

    Image of Product. Front orientation. Studs. Press-Fit Studs.
    Press these studs into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Lg.
    PEM® Part
    No.
    Thread
    Lg.
    For Min.
    Material Thk.
    For Min. Lg. Between Hole
    Ctr. and Sheet Edge
    For Hole
    Dia.
    Hole Size
    Tolerance
    Drill Bit
    Size
    Base
    Dia.
    Tensile
    Strength
    Hardness
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    2-56
    1/4"FH-256-411/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated5000000000000000
    5/16"FH-256-515/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    3/8"FH-256-619/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    1/2"FH-256-831/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    5/8"FH-256-1035/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    3/4"FH-256-1243/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated250000000000000
     
    4-40
    1/4"FH-440-45/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated1000000000000000
    5/16"FH-440-515/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    3/8"FH-440-69/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated1000000000000000
    1/2"FH-440-813/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated1000000000000000
    5/8"FH-440-1017/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    3/4"FH-440-1243/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    7/8"FH-440-1451/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    1"FH-440-1659/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    1 1/4"FH-440-201 11/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
     
    6-32
    1/4"FH-632-45/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    5/16"FH-632-57/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    3/8"FH-632-69/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    1/2"FH-632-813/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    5/8"FH-632-1017/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    3/4"FH-632-1221/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    7/8"FH-632-1425/32"0.040"1/4"0.138"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    1"FH-632-1629/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    1 1/4"FH-632-201 5/32"0.040"1/4"0.138"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    1 1/2"FH-632-241 13/32"0.040"1/4"0.138"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
     
    8-32
    1/4"FH-832-45/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    5/16"FH-832-57/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    3/8"FH-832-69/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1/2"FH-832-813/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    5/8"FH-832-1017/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    3/4"FH-832-1221/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    7/8"FH-832-1425/32"0.040"9/32"0.161"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1"FH-832-1629/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1 1/4"FH-832-201 5/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1 1/2"FH-832-241 13/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
     
    10-24
    5/16"FH-024-57/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/8"FH-024-617/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1/2"FH-024-825/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    5/8"FH-024-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    3/4"FH-024-1241/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    7/8"FH-024-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1"FH-024-1657/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1 1/4"FH-024-201 5/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1 1/2"FH-024-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated100000000000000
     
    10-32
    5/16"FH-032-57/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/8"FH-032-617/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1/2"FH-032-825/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    5/8"FH-032-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    3/4"FH-032-1241/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    7/8"FH-032-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1"FH-032-1657/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1 1/4"FH-032-201 9/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1 1/2"FH-032-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
     
    1/4"-20
    3/8"FH-0420-615/64"0.062"5/16"1/4"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1/2"FH-0420-823/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated500000000000000
    5/8"FH-0420-1031/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    3/4"FH-0420-1239/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    7/8"FH-0420-1447/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1"FH-0420-1655/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1 1/8"FH-0420-1863/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1 1/4"FH-0420-201 7/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1 1/2"FH-0420-241 23/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    2"FH-0420-321 55/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
     
    5/16"-18
    1/2"FH-0518-811/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    5/8"FH-0518-1015/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated250000000000000
    3/4"FH-0518-1219/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated250000000000000
    7/8"FH-0518-1423/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    1"FH-0518-1627/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    1 1/4"FH-0518-201 5/64"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    1 1/2"FH-0518-241 21/64"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
     
    M2.5 × 0.45 mm
    6 mmFH-M2.5-64 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated500000000000000
    10 mmFH-M2.5-108 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated500000000000000
    15 mmFH-M2.5-1513 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated500000000000000
    18 mmFH-M2.5-1816 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated250000000000000
     
    M3 × 0.5 mm
    6 mmFH-M3-64 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    8 mmFH-M3-86 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    10 mmFH-M3-108 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    12 mmFH-M3-1210 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    15 mmFH-M3-1513 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    18 mmFH-M3-1816 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    20 mmFH-M3-2018 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated250000000000000
    25 mmFH-M3-2523 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated250000000000000
     
    M3.5 × 0.6 mm
    8 mmFH-M3.5-86 mm1.000 mm6.5 mm3.5 mm0.000 mm to 0.08 mm3.5 mm5.7 mmNot RatedNot Rated500000000000000
    10 mmFH-M3.5-108 mm1.000 mm6.5 mm3.5 mm0.000 mm to 0.08 mm3.5 mm5.7 mmNot RatedNot Rated500000000000000
    12 mmFH-M3.5-1210 mm1.000 mm6.5 mm3.5 mm0.000 mm to 0.08 mm3.5 mm5.7 mmNot RatedNot Rated250000000000000
     
    M4 × 0.7 mm
    6 mmFH-M4-64 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    8 mmFH-M4-86 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    10 mmFH-M4-108 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    12 mmFH-M4-1210 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    15 mmFH-M4-1513 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    18 mmFH-M4-1816 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    20 mmFH-M4-2018 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    25 mmFH-M4-2523 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    30 mmFH-M4-3028 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated250000000000000
    35 mmFH-M4-3533 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated250000000000000
     
    M5 × 0.8 mm
    8 mmFH-M5-85 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated250000000000000
    10 mmFH-M5-107 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    12 mmFH-M5-129 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    15 mmFH-M5-1512 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    18 mmFH-M5-1815 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    20 mmFH-M5-2017 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    25 mmFH-M5-2522 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    30 mmFH-M5-3027 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated250000000000000
    35 mmFH-M5-3532 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated100000000000000
     
    M6 × 1 mm
    10 mmFH-M6-107 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    12 mmFH-M6-129 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    15 mmFH-M6-1512 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    18 mmFH-M6-1815 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    20 mmFH-M6-2017 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    25 mmFH-M6-2522 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    30 mmFH-M6-3027 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    35 mmFH-M6-3532 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated100000000000000
     
    M8 × 1.25 mm
    12 mmFH-M8-128 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    15 mmFH-M8-1511 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated250000000000000
    20 mmFH-M8-2016 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    25 mmFH-M8-2521 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    30 mmFH-M8-3026 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    35 mmFH-M8-3531 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
     
    18-8 Stainless Steel
     
    2-56
    1/4"FHS-256-45/32"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated500000000000000
    5/16"FHS-256-57/32"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated500000000000000
    3/8"FHS-256-65/16"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated500000000000000
    1/2"FHS-256-827/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated250000000000000
    5/8"FHS-256-1035/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated250000000000000
    3/4"FHS-256-1243/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated100000000000000
     
    4-40
    1/4"FHS-440-45/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    5/16"FHS-440-57/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    3/8"FHS-440-69/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    1/2"FHS-440-813/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    5/8"FHS-440-1035/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    3/4"FHS-440-1221/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    7/8"FHS-440-1451/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated100000000000000
    1"FHS-440-1629/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated100000000000000
     
    6-32
    1/4"FHS-632-45/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    5/16"FHS-632-57/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    3/8"FHS-632-69/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1/2"FHS-632-813/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    5/8"FHS-632-1017/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    3/4"FHS-632-1221/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    7/8"FHS-632-1425/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1"FHS-632-1629/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1 1/4"FHS-632-201 5/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1 1/2"FHS-632-241 13/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated100000000000000
     
    8-32
    1/4"FHS-832-45/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated500000000000000
    5/16"FHS-832-57/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated500000000000000
    3/8"FHS-832-69/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    1/2"FHS-832-813/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    5/8"FHS-832-1017/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    3/4"FHS-832-1221/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    7/8"FHS-832-1425/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated250000000000000
    1"FHS-832-1629/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    1 1/4"FHS-832-201 5/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated250000000000000
    1 1/2"FHS-832-241 13/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated100000000000000
     
    10-24
    3/8"FHS-024-69/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    1/2"FHS-024-813/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    5/8"FHS-024-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    3/4"FHS-024-1221/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    7/8"FHS-024-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    1"FHS-024-1629/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    1 1/4"FHS-024-201 5/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated100000000000000
    1 1/2"FHS-024-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated100000000000000
     
    10-32
    5/16"FHS-032-57/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/8"FHS-032-69/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1/2"FHS-032-825/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    5/8"FHS-032-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/4"FHS-032-1241/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    7/8"FHS-032-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1"FHS-032-1657/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1 1/4"FHS-032-201 5/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated100000000000000
    1 1/2"FHS-032-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated100000000000000
     
    1/4"-20
    3/8"FHS-0420-615/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1/2"FHS-0420-823/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    5/8"FHS-0420-1031/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    3/4"FHS-0420-1239/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    7/8"FHS-0420-1447/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1"FHS-0420-1655/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1 1/4"FHS-0420-201 7/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1 1/2"FHS-0420-241 23/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
     
    5/16"-18
    1/2"FHS-0518 -811/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    5/8"FHS-0518-1015/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    3/4"FHS-0518-1219/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    7/8"FHS-0518-1423/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    1"FHS-0518-1627/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    1 1/4"FHS-0518-201 3/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated50000000000000
    1 1/2"FHS-0518-241 11/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated50000000000000
     
    M2.5 × 0.45 mm
    6 mmFHS-M2.5-64 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    8 mmFHS-M2.5-86 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    10 mmFHS-M2.5-108 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    12 mmFHS-M2.5-1210 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    15 mmFHS-M2.5-1513 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
     
    M3 × 0.5 mm
    6 mmFHS-M3-64 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    8 mmFHS-M3-86 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    10 mmFHS-M3-108 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated500000000000000
    12 mmFHS-M3-1210 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    15 mmFHS-M3-1513 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    18 mmFHS-M3-1816 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    20 mmFHS-M3-2018 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated100000000000000
    25 mmFHS-M3-2523 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated100000000000000
     
    M4 × 0.7 mm
    6 mmFHS-M4-64 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    8 mmFHS-M4-86 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    10 mmFHS-M4-108 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    12 mmFHS-M4-1210 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    15 mmFHS-M4-1513 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    18 mmFHS-M4-1816 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    20 mmFHS-M4-2018 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    25 mmFHS-M4-2523 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    35 mmFHS-M4-3533 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated100000000000000
     
    M5 × 0.8 mm
    8 mmFHS-M5-85 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated100000000000000
    10 mmFHS-M5-107 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    12 mmFHS-M5-129 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    15 mmFHS-M5-1512 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    18 mmFHS-M5-1815 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    20 mmFHS-M5-2017 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    25 mmFHS-M5-2522 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    30 mmFHS-M5-3027 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated100000000000000
    35 mmFHS-M5-3532 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated100000000000000
     
    M6 × 1 mm
    10 mmFHS-M6-107 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated250000000000000
    12 mmFHS-M6-129 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    15 mmFHS-M6-1512 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    18 mmFHS-M6-1815 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    20 mmFHS-M6-2017 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    25 mmFHS-M6-2522 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    30 mmFHS-M6-3027 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    35 mmFHS-M6-3532 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
     
    M8 × 1.25 mm
    15 mmFHS-M8-1511 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    18 mmFHS-M8-1814 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    20 mmFHS-M8-2016 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    25 mmFHS-M8-2521 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    30 mmFHS-M8-3026 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated50000000000000
     

    Captive Pins
    3D CAD models available

    Image of Product. Front orientation. Captive Pins.
    Also known as pilot pins, use these pins to position, pivot, and align components. To install, punch or drill a hole in sheet metal, then use a punch and anvil or arbor press to clinch the head to the metal.
    Pins are passivated for added protection against corrosion and oxidation. The ends are chamfered for easy insertion.
    TPS PEM® Series—TPS PEM® Series pins work on steel or aluminum sheets. Made of 18-8 stainless steel, they offer a balance of strength and corrosion resistance and may be mildly magnetic.
    TP4 PEM® Series—TP4 PEM® Series pins work on stainless steel sheets. Made of 400 series stainless steel, they resist wear and abrasion, but are not as corrosion resistant as 18-8 stainless steel pins. Pins may be mildly magnetic.
    MPP PEM® Series—MPP PEM® Series pins work with most materials. Made of A286 stainless steel, they're our strongest captive pins, with corrosion resistance comparable to 18-8 stainless steel pins. They are nonmagnetic.
    Lg.
    Dia. Tolerance
    PEM® Series
    No.
    PEM® Part
    No.
    For Min.
    Panel Thk.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/8" Diameter
    3/8"-0.002" to 0.002"TPSTPS-125-60.04"50000000000000000
    1/2"-0.002" to 0.002"TPSTPS-125-80.04"5000000000000000
    5/8"-0.002" to 0.002"TPSTPS-125-100.04"5000000000000000
    3/4"-0.002" to 0.002"TPSTPS-125-120.04"250000000000000
     
    3/16" Diameter
    3/8"-0.002" to 0.002"TPSTPS-187-60.04"2500000000000000
    1/2"-0.002" to 0.002"TPSTPS-187-80.04"2500000000000000
    5/8"-0.002" to 0.002"TPSTPS-187-100.04"2500000000000000
    3/4"-0.002" to 0.002"TPSTPS-187-120.04"2500000000000000
    1"-0.002" to 0.002"TPSTPS-187-160.04"2500000000000000
     
    1/4" Diameter
    1/2"-0.002" to 0.002"TPSTPS-250-80.04"2500000000000000
    5/8"-0.002" to 0.002"TPSTPS-250-100.04"2500000000000000
    3/4"-0.002" to 0.002"TPSTPS-250-120.04"100000000000000
    1"-0.002" to 0.002"TPSTPS-250-160.04"2500000000000000
     
    3 mm Diameter
    8 mm-0.05 mm to 0.05 mmTPSTPS-3MM-81 mm250000000000000
    10 mm-0.05 mm to 0.05 mmTPSTPS-3MM-101 mm250000000000000
    12 mm-0.05 mm to 0.05 mmTPSTPS-3MM-121 mm250000000000000
    16 mm-0.05 mm to 0.05 mmTPSTPS-3MM-161 mm250000000000000
     
    4 mm Diameter
    8 mm-0.05 mm to 0.05 mmTPSTPS-4MM-81 mm250000000000000
    10 mm-0.05 mm to 0.05 mmTPSTPS-4MM-101 mm250000000000000
    12 mm-0.05 mm to 0.05 mmTPSTPS-4MM-121 mm250000000000000
    16 mm-0.05 mm to 0.05 mmTPSTPS-4MM-161 mm250000000000000
     
    5 mm Diameter
    10 mm-0.05 mm to 0.05 mmTPSTPS-5MM-101 mm250000000000000
    12 mm-0.05 mm to 0.05 mmTPSTPS-5MM-121 mm2500000000000000
    16 mm-0.05 mm to 0.05 mmTPSTPS-5MM-161 mm2500000000000000
    20 mm-0.05 mm to 0.05 mmTPSTPS-5MM-201 mm2500000000000000
     
    6 mm Diameter
    12 mm-0.05 mm to 0.05 mmTPSTPS-6MM-121 mm2500000000000000
    16 mm-0.05 mm to 0.05 mmTPSTPS-6MM-161 mm2500000000000000
    20 mm-0.05 mm to 0.05 mmTPSTPS-6MM-201 mm2500000000000000
     
    400 Series Stainless Steel
     
    1/8" Diameter
    3/8"-0.002" to 0.002"TP4TP4-125-60.04"250000000000000
    1/2"-0.002" to 0.002"TP4TP4-125-80.04"250000000000000
    5/8"-0.002" to 0.002"TP4TP4-125-100.04"2500000000000000
    3/4"-0.002" to 0.002"TP4TP4-125-120.04"2500000000000000
     
    3/16" Diameter
    3/8"-0.002" to 0.002"TP4TP4-187-60.04"2500000000000000
    1/2"-0.002" to 0.002"TP4TP4-187-80.04"2500000000000000
    5/8"-0.002" to 0.002"TP4TP4-187-100.04"2500000000000000
    3/4"-0.002" to 0.002"TP4TP4-187-120.04"2500000000000000
    1"-0.002" to 0.002"TP4TP4-187-160.04"2500000000000000
     
    1/4" Diameter
    1/2"-0.002" to 0.002"TP4TP4-250-80.04"2500000000000000
    5/8"-0.002" to 0.002"TP4TP4-250-100.04"2500000000000000
    3/4"-0.002" to 0.002"TP4TP4-250-120.04"2500000000000000
    1"-0.002" to 0.002"TP4TP4-250-160.04"2500000000000000
     
    3 mm Diameter
    8 mm-0.05 mm to 0.05 mmTP4TP4-3MM-81 mm250000000000000
    10 mm-0.05 mm to 0.05 mmTP4TP4-3MM-101 mm2500000000000000
    12 mm-0.05 mm to 0.05 mmTP4TP4-3MM-121 mm2500000000000000
    16 mm-0.05 mm to 0.05 mmTP4TP4-3MM-161 mm2500000000000000
     
    4 mm Diameter
    8 mm-0.05 mm to 0.05 mmTP4TP4-4MM-81 mm250000000000000
    10 mm-0.05 mm to 0.05 mmTP4TP4-4MM-101 mm2500000000000000
    12 mm-0.05 mm to 0.05 mmTP4TP4-4MM-121 mm2500000000000000
    16 mm-0.05 mm to 0.05 mmTP4TP4-4MM-161 mm2500000000000000
     
    5 mm Diameter
    10 mm-0.05 mm to 0.05 mmTP4TP4-5MM-101 mm2500000000000000
    12 mm-0.05 mm to 0.05 mmTP4TP4-5MM-121 mm2500000000000000
    16 mm-0.05 mm to 0.05 mmTP4TP4-5MM-161 mm2500000000000000
    20 mm-0.05 mm to 0.05 mmTP4TP4-5MM-201 mm2500000000000000
     
    6 mm Diameter
    12 mm-0.05 mm to 0.05 mmTP4TP4-6MM-121 mm2500000000000000
    16 mm-0.05 mm to 0.05 mmTP4TP4-6MM-161 mm2500000000000000
    20 mm-0.05 mm to 0.05 mmTP4TP4-6MM-201 mm2500000000000000
     
    A286 Stainless Steel
     
    1 mm Diameter
    2 mm-0.038 mm to 0.038 mmMPPMPP-1MM-20.5 mm25000000000