Insert plastic or soft metal tubing into the push-to-connect fittings on these valves for a low-pressure seal in food and beverage lines. They automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure. Adjust the outlet pressure within the range. They have two gauge ports.

Compression fittings bite down on hard metal and plastic tubing for a tighter seal than push-to-connect fittings. These valves automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure. Adjust the outlet pressure within the range. The Buna-N/stainless steel diaphragm and EPDM seal are FDA compliant 21 CFR 177.2600.

These valves are often used to regulate pressure in food and beverage lines. They automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure. Adjust the outlet pressure within the range. Valves have two gauge ports and come with plugs to close the unused ports.

Designed to meet 3-A sanitary standards, these valves regulate liquid, gas, and air pressure in hygienic zones of food and beverage plants. They’re often used at the end of pipelines on processing and sanitizing equipment. Made of 316 stainless steel, they won't corrode from frequent washdowns with harsh cleaners. With an extremely smooth interior that self-drains, bacteria won't have time or space to grow. The spring and internal valve mechanisms are sealed off behind the diaphragm, which also prevents contamination. They connect with quick-clamp fittings, so disassembling to clean your line takes little time.

These valves obstruct flow to maintain sufficient operating pressure in your system. If the system pressure exceeds the set pressure, they exhaust through the outlet. They meet ANSI/FCI 70-2 Class III standards for shut-off valves, meaning a maximum of 0.1% of fluid, gas, or air will escape through the outlet when they’re closed. An integrated T-handle lets you set the outlet pressure without additional tools. The diaphragm and seal resist repeated exposure to water, and they’re FDA compliant for direct contact with food.

Regulate air, gas, and liquid pressure on food, beverage, and pharmaceutical lines with these valves—they’re 3-A certified to meet sanitary design standards. Attach them to your line to reduce a high, variable inlet pressure to a lower, stable outlet pressure.

Twist the T-handle on top of the valve to adjust the outlet pressure. When the valve is closed, a seal on the outlet prevents leaks and helps maintain consistent pressure. These valves meet ANSI/FCI 70-2 Class III, which means a maximum of 0.1% of fluid, gas, or air can escape while they are fully closed. The spring and valve mechanism are sealed behind the diaphragm, so contaminants can’t enter. Both the diaphragm and seals hold up to water, detergents, and chemicals. They’re also FDA compliant for direct contact with food.

Made of 316 stainless steel, these valves won’t corrode from frequent washdowns with harsh cleaners. They connect to your line with quick-clamp sanitary fittings, also known as tri-clamp connections, which are easier to remove and sanitize than threaded connections. The polished interior is extremely smooth, so there’s nowhere for bacteria to hide. They’re also self-draining, so liquids drain completely and don’t contaminate your line. Keep these valves open during clean-in-place (CIP) cycles with a locking pin.