There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

Close and open these roller latches with a push—there's no need for a handle.

An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

A catch grabs and holds the strike plate, so doors stay shut when you push them closed.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.

When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

Keep doors on refrigerators and industrial enclosures closed.

Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.

With a flat inset grip, the handle on these latches is recessed so you won’t bump them or catch clothes on them.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Twist the knob on these locks to open doors and push them closed to secure. These locks are a convenient alternative to cam locks, which require you to rotate the cam to open and close doors.

Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

To prevent accidental opening, these latches have a safety catch.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

To prevent accidental opening, these latches have a safety catch.

Mount these latches on a corner to draw perpendicular surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

These latches have a safety catch to prevent accidental opening.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Lift and turn the handle 180° to open and close these latches.

Use these L-handle latches to draw lightweight surfaces together.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a tight hold. They’re often used for securing cabinet doors and file drawers.

These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Spot when these locks are open with just a glance—a red indicator shows they're unlocked. Also known as compression cam locks, their cam seals more tightly against a door or drawer than a standard cam to reduce rattling from vibration.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

Mount these two-piece locks on sealed pressurized enclosures to gradually release pressure and prevent your door from bursting open.

Prevent cabinet doors, drawers, and other enclosures with smaller-than-standard diameter through holes from vibrating open. Also known as compression cam locks, these locks create a tighter hold than standard cam locks, making them useful for doors that have a seal. These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Two sets of mounting holes allow mounting on the bottom or side.