Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Mounting feet make attachment to machines and walls hassle-free.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Control access to these enclosures with a key-operated lock.

Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

These enclosures withstand temperatures up to 475° F.

Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.

Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.

House electrical components in these general purpose enclosures.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.

Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.

Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Inspect components without opening the cover.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

These enclosures are rated NEMA 4 for protection from dirt and washdowns.

Control access to these enclosures with a key-operated lock.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.

The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.

Protect tablet computers, touch displays, and readouts in these specially sized enclosures. They are rated IP65 for protection from spraying water.

Use these open boxes with adhesive for electronics (also known as potting compound) to encase electronic assemblies and protect them from vibration, tampering, moisture, and corrosives.

Snap these enclosures onto 35 mm DIN rail and lock them in place.

Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.

Protect monitors and televisions from environmental damage with these enclosures.

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.

Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.

Add a secondary panel that swings to mount more components in your enclosure.

Customize component placement without drilling leaky holes—these channels screw into the mounting bosses in your enclosure.

Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

This raceway system is also known as wireway and wire trough.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Store and protect 3D printer filaments, optical equipment, and other sensitive material in a humidity-controlled environment. Also known as dry boxes and desiccator cabinets, these cabinets prevent moisture-sensitive 3D printer filaments, such as nylon, ABS, and polycarbonate, from becoming brittle, discolored, or broken. They also keep sensitive electrical and optical equipment, such as microscopes and lenses, free from mold and fungus.