Tackle roofing and other heavy duty heating applications—these torches have a BTU output starting at nearly seven times the output of standard propane torches.

Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.

These torches have approximately half the BTU output of standard propane torches for use in light duty applications.

Access overhead and other hard-to-reach applications.

Get flame temperatures from these torches that are capable of cutting, welding, and brazing steel up to 3/16" thick.

Safely transport and store propane gas in these tanks.

Use propane in heating, thawing, and soldering applications.

These CGA adapters allow you to connect a hose to a propane torch.

Commonly used in low-pressure welding applications, these fittings connect downstream of your pressure regulator. Slide the barbed end into hose and secure with a crimp-on hose ferrule.

Designed to handle high-pressure welding applications, these CGA fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders.

Often used for loading and unloading gas tankers, these couplings are tough enough to handle frequent connections and designed to be virtually spill-free.

This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.

Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.

Replace the propane tank on vehicles. Tanks come unfilled.

These portable burners connect to an LP gas tank so you can carry them back and forth between different application sites.

Also known as Bunsen and Tirrill burners, separate controls adjust flame height and temperature. Connect to a gas line.

Distribute heat over a wide area for large jobs.

Provide appropriate code numbers for hazards with these NFPA (National Fire Protection Association) labels.

The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

Clearly mark containers so you know what’s inside.

The graphics on these labels identify hazardous materials and provide safety reminders.

Mark hazardous materials with standard symbols so users know to handle them with care. These labels come with stickers that have GHS pictograms, which were designed by the UN to clearly identify chemicals as flammable, toxic, corrosive, and more.

The illustrations on these signs help workers identify hazards at a glance.

Add numbers, abbreviations, and symbols to indicate specific hazards and the degree of hazard using these NFPA (National Fire Protection Association) signs.

Identify the presence of hazardous materials with D.O.T.-regulated numbers, symbols, and messages.

The color stripes on these tags identify the type of hazard. Write in the appropriate code numbers to indicate the severity.

Our most powerful ceiling mount direct heaters, these warm people in large spaces, such as warehouses.

Built for outdoor use, these heaters warm people at worksites and other cold spots without access to electricity.

Heat shops, garages, warehouses, and other large spaces with these heaters that can be suspended from the ceiling.

For use with acetylene, hydrogen, methane, propane, or propylene gas.

Add fine flow control to tubing lines for oil, butane, diesel fuel, fuel oil, gasoline, kerosene, natural gas, and propane. These valves have a barbed fitting that grips onto tubing, providing a secure hold. Turn the handle to adjust flow in small increments.

Insert tubing into the fittings on these valves—no heat, solder, or flux required. With a fluoroelastomer seal and a PVDF body, they can withstand aggressive and corrosive solutions in chemical-processing applications. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.