Commonly used on hood and trunk lids, these simple, three-piece rods telescope from 18 1/2" to 46 3/4" to prop lids open at a variety of angles.

Keep environments free of contaminants—with plastic bushings, there's no metal-to-metal contact that can release particles as these supports open and close. Manually control these free-moving lid supports through their full range of motion. Raise the lid until the hold-open mechanism on the support is engaged; slightly lift it again to release the hold and close the lid.

Also known as hatch springs, these supports are commonly used on hatches and other top-opening lids. Raise the lid to extend the spring, which props the lid open—an internal cable keeps the spring from overextending. Press the center of the spring to release the hold and close the lid.

Springs provide lifting assistance to raise and hold lids open—slightly lift the lid to get it started and the support will do the rest. Manually shut the lids and the supports will hold them in the closed position.

Requiring less space to mount and operate, these supports are often used on small cabinets and enclosures. They gradually slow your lid's motion to prevent it from slamming open. To open lids, lower them and the support will slowly and softly do the rest. Manually shut the lids and the supports will hold them in the closed position.

Made from 316 stainless steel, these propellers have excellent corrosion resistance.

These mixer propellers have a highly polished finish, leaving no room for bacteria to grow—they’re commonly used in sanitary environments such as food and pharmaceutical plants.

Blades collapse to fit through 2" diameter and smaller openings, such as 55-gallon drums with a NPT opening size of 2.

Bend the blades to your desired angle.

Cut through solid particles in your mixture.

Designed for use with mixing blades, these shafts are left-hand threaded for counterclockwise motion.

Often used to open lids, covers, windows, conveyors, and seats, these gas springs function similar to a hatchback opening on a car. They have an eyelet end fitting on each end.

These general purpose gas springs assist in opening lids, covers, windows, conveyors, and seats—similar to a hatchback opening on a car.

Made from stainless steel for excellent corrosion resistance in damp environments.

Stainless steel construction provides corrosion resistance for use in damp environments.

These gas springs have threaded ends so you can use them with any combination of end fittings, studs, and mounting brackets.

Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.

Release gas from these springs until they supply the exact force you need—made of corrosion-resistant 316 stainless steel, they’re commonly used in wet environments.

Made from stainless steel for excellent corrosion resistance in damp environments. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements.

Pair one of these gas springs with a release control to stop and release the gas spring anywhere along the stroke with the push of a button or lever.

Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.

About twice as thick as standard 90° angle ball stud mounting brackets, these brackets are suitable for high-force applications.

Made of easy-to-machine aluminum, these brackets come without mounting holes, so you can drill holes where you need them.

Drill mounting holes where you need them—these brackets are made from aluminum, so they’re easy to machine.

Pair these 90° angle offset-arm brackets with ball socket end fittings to mount your gas spring in almost any position.

Made with thicker stainless steel than standard ball stud mounting brackets, these brackets work well in high-force applications exposed to damp conditions.

Made from stainless steel, these brackets resist corrosion in damp environments.

Attach ball socket end fittings to these studs to mount gas springs.

Made from stainless steel for excellent corrosion resistance in damp environments.

Made from stainless steel for excellent corrosion resistance in damp environments.