Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

Press this optically clear film into place on windows, mirrors, and glass surfaces. When one layer gets scratched or marred, peel it away to expose a new layer.

With its reflective, mirror-like finish, this film is often used to repair or create new decorative finishes on edge trim, panels, and other flat surfaces.

Easy to apply and remove, this film tape protects touch screens and other delicate parts during manufacturing and shipping.

Use this UV-resistant tape to temporarily protect smooth plastic, metal, and glass surfaces.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

This tape reflects intense heat to protect sensitive components.

Protect screen-printed graphics during high-temperature laminating and molding.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. Use it to wrap pipes and electrical conduit both above and below ground.

Low-Friction Tape Shapes Made with Teflon® PTFE.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Reduce noise and vibration in chutes, bins, and similar delivery systems with this UHMW-faced foam tape.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

This film is often used as a separator when heating parts in an oven.

Protect sensitive items from static charges.

This wrap conforms to the contours of any item and adheres to itself.

This printed stretch wrap comes on a handle so you can quickly apply a message to packages.

The powered platform on these dispensers turns a pallet while stretch wrap unrolls for effortless coverage.

Heat this film to create a form-fitting barrier around single packages and small shipments to protect them from moisture and dirt.

Cushion fragile items without the bulk of bubble wrap.

This wrap clings to itself but not the item being wrapped, and continues to adhere after multiple uses.

Shield metal from corrosion and block out damaging UV light. A hook-and-loop closure makes these bags easy to seal.

Clamp shut the jaws to seal bags.

Use the wheel to make a seal of any length or shape.

Use the shelf to hold work while pushing down on the foot pedal to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.

These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Coat knobs, handles, mirrors, and other objects with a micron-thin, decorative finish. 99.999% or 99.88% elementally pure, these metals vaporize when heated with low-voltage current inside a high-vacuum environment.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

Use these coatings on structural lumber, decking, and wood shingles.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.

Cover heavily-used ADA-compliant door handles to help keep them free of germs. These covers are clear in color, so details on the handle show through.

Reduce the spread of illness by keeping the surface of buttons, such as those in an elevator, free of bacteria and germs.

Step into the dispenser and this plastic film clings to the bottom of your shoes and boots, so you don’t track dirt into your home or worksite.