For full-face protection while welding, select one of these shields. They meet ANSI/ISEA Z87.1+ high-impact standards when worn with safety glasses or goggles. All have a ratchet adjustment with an easy-turn knob.

Flip-up lenses have a welding shade that raises to expose a viewing lens. These shields are good for cutting and brazing jobs.

Face shields with chin guard provide added protection.

Hold these lightweight face shields up to your face for quick inspection of welding activity. They meet ANSI/ISEA Z87.1 basic-impact standards when used with safety glasses or goggles.

Protect your head and neck from extreme heat. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.

Rayon provides good radiant-heat protection as well as moderate spark protection and protection against molten metal splashes.

Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance, in addition to offering protection against molten metal splashes.

PBI/Kevlar aramid blend is a strong, lighter weight fabric that offers good heat resistance without the bulk of other Kevlar blends.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance. It provides protection against molten metal splashes.

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.

Optional fan (sold separately) mounts on your hood and pumps air inside using a fan motor. It operates on four AA batteries (not included).

Replace the filter on your respirator when breathing becomes difficult.

N95 filters filter out 95% of solid particles. They are not oil resistant.

N99 filters filter out 99% of solid particles. They are not oil resistant.

P95 filters resist oil exposure for up to 40 hours and filter out 95% of solid particles.

P100 filters resist oil exposure for up to 40 hours and filter out 99.97% of solid particles.

These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications. Made of Tychem 2000 (formerly known as Tychem QC), these hood respirators have two layers: an outer bib for overspray protection and an inner bib that tucks into your clothing for splash protection. Respirators include a rechargeable lithium ion (Li-Ion) battery that provides approximately four hours of continuous use when fully charged. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection.

Pinlock suspension hats adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Replace the filter in your pump to supply clean air to your respirator.

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles. The inner lens meets ANSI/ISEA standards for impact resistance.

Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extra hose to span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube (sold separately) to cool incoming air by as much as 30° F.

Block out smoke or gas in seconds during emergencies. These respirators come in a pouch, so they’re easy to store and pull out when needed. Simply slip them on—they fit a variety of head sizes. The filter works for 15 minutes, so you have enough time to safely leave your dangerous environment. If it’s dark, dusty, or smoky, their bright yellow color makes you easier to see.

Designed to meet clean room standards, these hoods act as a barrier between the worker and the room to prevent pollutants, such as dust particles and microbes, from contaminating a space.

Lower clean room classes have fewer and smaller contaminants.

Tyvek polyethylene holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers for a material that’s soft yet strong. These hoods are disposable.

Polyester greatly outlasts Tyvek polyethylene. It withstands liquid splashes and abrasion and is reusable when laundered to clean room standards—lasts for up to 100 washes. Must be laundered prior to first use.